In this study, poly(vinylidene fluoride) (PVDF) membranes were prepared using two different solvents with various polymer concentrations to investigate the predominant kinetic or thermodynamic aspects of membrane preparation in a phase separation process. For this purpose, dimethyl sulfoxide (DMSO) as a weak solvent and N‐2‐methylpyrrolidone (NMP) as a strong solvent were used with polymer concentrations between 8 and 15 wt %. Scanning electron microscopy and water content, contact angle, and pore size measurements were used to assess the factors affecting the physicochemical properties of the prepared membranes. The results showed that in the case of NMP, the membrane structure is mainly controlled by thermodynamic parameters, while when using DMSO, kinetic parameters are predominant. According to the results, the prepared PVDF‐based membranes with DMSO exhibited a relatively denser top layer and less permeation compared to the NMP/PVDF membranes. The difference between the viscosities of the casting solutions with equal polymer concentrations in DMSO and NMP was considered to be the main effective factor in solvent/nonsolvent exchange, resulting in denser top layers in the DMSO/PVDF membranes. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018, 135, 46419.

No abstract