Polyurethane/Graphite composite foam samples with different filler loadings were synthesized for application in electromagnetic shielding. The samples were characterized using Fourier transform infra‐red, thermal gravimetric analysis, scanning electron microscope, universal testing machine, and rheometer. Moreover, to adapt and customize this work in the field of aerospace, the measurements were performed in the X‐band at the range of (8–12) GHz. The results showed that the increase in filler content improves the mechanical properties and thermal stability of the composite materials. The electromagnetic interference shielding effectiveness reached (− 45) dB with 30 wt% filler content. It is expected that the polyurethane/graphite composite foamy materials may be considered a promising material to be used in electromagnetic shielding applications.

Reduced graphene oxide (RGO) is an effective polymer filler for shielding against electromagnetic interference (EMI). Its shielding efficiency rises as its concentration in polymer matrices increases. However, higher filler loading impedes polymer foaming and deteriorates the mechanical properties of the resulting foam. The goal of this work is to determine the optimal RGO concentration that can be loaded into polyurethane (PU) matrix to produce a composite foam with a high level of electromagnetic shielding along with good mechanical properties. To that end, different PU foam samples containing varying amounts of RGO were synthesized. The synthesized samples were characterized by scanning electron microscope (SEM), thermogravimetric analysis (TGA), Fourier transform infra-red (FT/IR) and universal testing machine. Furthermore, the shielding efficiency of the samples was measured using a vector network analyzer over the frequency range of 8-12 GHz. The results revealed that the increase in RGO concentration enhances the mechanical and thermal properties of the prepared composite foam materials. The shielding effectiveness reached À23 dB at 5 wt% RGO concentration. The polyurethane-RGO composite foam materials have been identified as potentially viable materials for use in electromagnetic shielding applications.

Electromagnetic interference (EMI) has been recognized as a new sort of pollution and can be considered as the direct interference of electromagnetic waves among electronic equipment that frequently affects their typical efficiency. As a result, shielding the electronics from this interfering radiation has been addressed as critical issue of great interest. In this study, different hybrid nanocomposites consisting of magnetite nanoparticles (Fe3O4) and reduced graphene oxide (rGO) as (conductive/magnetic) fillers, taking into account different rGO mass ratios, were synthesized and characterized by XRD, Raman spectroscopy, TEM and their magnetic properties were assessed via VSM. The acquired fillers were encapsulated in the polyurethane foam matrix with different loading percentages (wt%) to evaluate their role in EMI shielding. Moreover, their structure, morphology, and thermal stability were investigated by SEM, FTIR, and TGA, respectively. In addition, the impact of filler loading on their final mechanical properties was determined. The obtained results revealed that the Fe3O4@rGO composites displayed superparamagnetic behavior and acceptable electrical conductivity value. The performance assessment of the conducting Fe3O4@rGO/PU composite foams in EMI shielding efficiency (SE) was investigated at the X-band (8–12) GHz, and interestingly, an optimized value of SE −33 dBw was achieved with Fe3O4@rGO at a 80:20 wt% ratio and 35 wt% filler loading in the final effective PU matrix. Thus, this study sheds light on a novel optimization strategy for electromagnetic shielding, taking into account conducting new materials with variable filler loading, composition ratio, and mechanical properties in such a way as to open the door for achieving a remarkable SE.

No abstract

In this manuscript, a multiple-input multiple-output (MIMO) antenna array system with identical compact antenna elements providing wide radiation and diversity function is introduced for sub 6 GHz fifth-generation (5G) cellular applications. The introduced design contains four pairs of miniaturized square-loop resonators with dual-polarization and independently coupled T-shaped feed lines which have been placed symmetrically at the edge corners of the smartphone mainboard with an overall size of 75 mm × 150 mm. Therefore, in total, the introduced array design encompasses four pairs of horizontally and vertically polarized resonators. The elements are very compact and utilize at 3.6 GHz, a potential 5G candidate band. In order to improve the frequency bandwidth and radiation coverage, a square slot has been placed and excited under each loop resonator. Desirable isolation has been observed for the adjacent elements without any decoupling structures. Therefore, they can be considered self-isolated elements. The presented smartphone antenna not only exhibits desirable radiation but also supports different polarizations at various sides of the printed circuit board (PCB). It exhibits good bandwidth of 400 MHz (3.4-3.8 GHz), high-gain patterns, improved radiation coverage, and low ECC/TARC (better than 0.004 and -30 dB at 3.6 GHz, respectively). Experimental measurements were conducted on an array manufactured on a standard smartphone board. The simulated properties of this MIMO array are compared with the measurements, and it is found that they are in good agreement. Furthermore, the introduced smartphone array offers adequate efficiency in both the user interface and components integrated into the device. As a result, it could be suitable for 5G handheld devices.