International audienceThis study investigates the microplastic contamination of both urban compartments (wastewater and total atmospheric fallout) and surface water in a continental environment (Greater Paris, France). These first investigations on urban environment confirm the presence of microplastics in sewage, freshwater and total atmospheric fallout and provide knowledge on the type and size distribution of microplastics in the [100 µm-5 000 µm] range. For the first time, the presence of microplastics, mostly fibers, is highlighted in total atmospheric fallout (29-280 particles/m2/day). High levels of fibers were found in wastewater (260-320 x103 particles/m3). In treated effluent, the contamination significantly decreases to 14-50 x103 particles/m3. In River Seine, two sampling devices are used to collect both large and small microplastic particles: i) a plankton net (80 µm mesh) and ii) a manta trawl (330 µm mesh). Sampling with the plankton net showed a predominance of fibers with concentrations ranging from 3 to 108 particles/m3. A greater diversity of both microplastic shapes and types was encountered during manta trawl sampling but at much lower concentrations (0.28-0.47 particles/m3). This combined approach could be relevant and implemented in future studies to provide an accurate overview of microplastic distribution in freshwater

This study aimed at: (a) providing information on the occurrence and concentration ranges in urban stormwater for a wide array of pollutants (n = 77); (b) assessing whether despite the differences between various catchments (land use, climatic conditions, etc.), the trends in terms of contamination level are similar; and (c) analyzing the contribution of total atmospheric fallout (TAF) with respect to sources endogenous to this contamination. The studied contaminants include conventional stormwater contaminants (polycyclic aromatic hydrocarbons (PAHs), Zn, Cu, Pb, etc.), in addition to poorly or undocumented pollutants such as nonylphenol and octylphenol ethoxylates (NPnEO and OPnEO), bisphenol A (BPA), polybrominated diphenyl ethers (PBDEs), a wide variety of pesticides, and various metals of relevance (As, Ti, Sr, V). Sampling and analysis were performed using homogeneous methods on three urban catchments with different land use patterns located in three distinct French towns. For many of these pollutants, the results do not allow highlighting a significant difference in stormwater quality at the scale of the three urban catchments considered. Significant differences were, however, observed for several metals (As, Cr, Cu, Ni, Sr and Zn), PAHs, and PBDEs, though this assessment would need to be confirmed by further experiments. The pollutant distributions between dissolved and particulate phases were found to be similar across the three experimental sites, thus suggesting no site dependence. Lastly, the contributions of TAF to stormwater contamination for micropollutants were quite low. This finding held true not only for PAHs, as previously demonstrated in the literature, but also for a broader range of molecules such as BPA, NPnEO, OPnEO, and PBDEs, whose high local production is correlated with the leaching of urban surfaces, buildings, and vehicles.

No abstract

No abstract

The treatment efficiency of a vegetative filter strip and a biofiltration swale treating heavily loaded road runoff are evaluated. Concentrations measured in water drained from the two systems are compared to those in untreated road runoff collected from a reference catchment for a wide range of contaminants including organic carbon, nutrients (N and P), trace metals, and organic micropollutants (polycyclic aromatic hydrocarbons (PAH), total petroleum hydrocarbons (TPH), alkylphenols, bisphenol-A, phthalates), in both total and dissolved phases. Predominantly particulate pollutants, including Pb, Zn and PAH, were very efficiently removed (around 90%) for most events. However, poor particulate removal was observed during a winter period. Relatively few pollutants were significantly removed in the dissolved phase and observed concentration reductions tended to be lower than those of suspended solids and associated pollutants; as such, lower removals were observed for total concentrations of moderately particulate micropollutants, including bisphenol-A, alkylphenols and phthalates. In addition, some pollutants appear to be emitted from various biofilter components (filter media, drainage and lining materials), as low or negative concentration removals were observed during the first months of operation of the biofiltration swale.

No abstract

No abstract

A substantial database of annual metal runoff loads, obtained from a 14-month field exposure campaign on 12 different metal roofing materials at two sites within Paris conurbation, is presented herein. Thirteen metallic species have been considered. A comparison among the various roofing materials yields a ranking of their runoff pollution potential, which highlights that aluminum, coated products, and stainless steel display the lower emission levels, before zinc and copper materials. Lead materials appear to release more metallic species, and tend to do so in quite large quantities. Whatever the material family considered, older materials apparently release more metallic species with higher levels of emission. In considering zinc emissions from zinc-based materials, it is clear that surface coatings significantly reduce zinc emissions (40% less for the Zn3(PO4)2 surface-treated Anthra zinc, compared to natural zinc; and 99% less for prepainted galvanized steel compared to standard galvanized steel). In the case of Anthra zinc however, surface treatment induces the release of Ni into the runoff, and Ni constitutes a priority pollutant in the European Water Framework Directive (2000/60 CE). A high level of consistency with literature data has been found for Zn runoff when considering runoff rates reported at the same inclination.