In this work, a novel triple-layer nanocomposite membrane prepared with polyethersulfone (PES)/carbon nanotubes (CNTs) as the primary bulk material and poly (vinylidene fluoride-co-hexafluoro propylene) (PcH)/CNTs as the outer and inner surfaces of the membrane by using electrospinning method is introduced. Modified PES with CNTs was chosen as the bulk material of the triple-layer membrane to obtain a high porosity membrane. Both the upper and lower surfaces of the triple-layer membrane were coated with PcH/CNTs using electrospinning to get a triple-layer membrane with high total porosity and noticeable surface hydrophobicity. Combining both characteristics, next to an acceptable bulk hydrophobicity, resulted in a compelling membrane for membrane distillation (MD) applications. The prepared membrane was utilized in a direct contact MD system, and its performance was evaluated in different salt solution concentrations, feed velocities and feed solution temperatures. The results of the prepared membrane in this study were compared to those reported in previously published papers. Based on the evaluated membrane performance, the triple-layer nanocomposite membrane can be considered as a potential alternative with reasonable cost, relative to other MD membranes.
Photovoltaic-thermal (PV/T) solar collectors converts solar radiation into electrical power and heat. A considerable amount of received solar energy can be lost to the ambient from the top surface of...
The progression of smart technologies such as vacuum glazed windows are considered a realistic achievement of the net energy zero buildings (NZEBs). From designers to researchers to builders, there has been an increasing concern about understanding the inter-dependencies between the parameters and influencing factors that determine the performance of vacuum glazed smart windows. This research reviews the performance parameters such as thermal transmittance (U value), thermal resistance (R value), solar transmittance (g value), visible light transmittance (v value) and thermal resistance of residual gas space (Rgas value). These are interdependent on factors such as edge seal, support pillar array, low emittance coatings, getters, and effective evacuation process. This research implicates that effective hermetic edge seal provides longevity such as fusion and solder glass edge sealed vacuum glazing could be cost-effective and energy efficient solution. Stainless steel support pillar array is an unavoidable compromise on U value. This review shows that an increase of the size of glass sheet increases support pillar array improving the overall U value. Also, an addition of low emittance coatings enhances U value whilst maintaining v value. To improve the overall life span of the vacuum glazed smart window, an incorporation of combo-getter that absorb any gases released from the internal glass surfaces in to into the vacuum cavity from the glass surface which prevents degradation of vacuum pressure and provide long term vacuum pressure stability in the vacuum glazed smart window. A recent improvement in the understanding of evacuation process shows that hot-plate surface heat induction of 60˚C improved the vacuum pressure and mitigates the pump-out hole sealing process whilst lessening the temperature induced stresses.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.