Extending the lifetime of passive products, i.e., products that do not consume materials or energy during the use phase, by implementing product-service systems (PSS) has a potential to reduce the environmental impact while being an attractive and straightforward measure for companies to implement. This research assesses the viability of introducing PSS for passive products, by documenting five real product cases of prolonging the lifetime through repair or refurbishment and by quantifying, through life cycle assessment (LCA) and life cycle costing (LCC), the change in environmental and economic outcome. The environmental impact (measured as global warming potential over the life cycle) was reduced for all cases because extraction and production dominated the impact. This reduction was 45–72% for most cases and mainly influenced by the number of reuses and the relative environmental burden of the components whose lifetime was prolonged. The costs for the company (measured as LCC from the manufacturer’s perspective) decreased too by 8–37%. The main reason that costs reduced less than the environmental impact is that some costs have no equivalent in LCA, e.g., administration and labor costs for services. The decreases in both LCA and LCC results, as well as the willingness of the companies to implement the changes, demonstrate that this measure can be financially attractive for companies to implement and effectively contribute to a circular economy.

This paper summarizes the 76th LCA Discussion Forum end its main findings. Main issues when addressing emerging technologies identified were: the lack of primary data, the need for (shared) future background scenarios and (guidlines for) a common methodology. The following recommendations have been derived by the organizers: 1) Specific foreground inventories are always tailor-made, but consistency can be improved through lists of mandatory considerations. 2) Continue sharing (future) technology data and proxy processes, that can be readily replicated to new studies and assist in developing inventories. 3) Streamline and unify the process of including scenarios for background systems. New approaches may provide first important solutions to efficiently include consistent future scenarios in prospective LCA.

Tidal current technologies have the potential to provide highly predictable energy, since tides are driven by lunar cycles. However, before implementing such technologies on a large scale, their environmental performance should be assessed. In this study, a prospective life cycle assessment (LCA) was performed on a 12 MW tidal energy converter array of Minesto Deep Green 500 (DG500) prototypes, closely following the Environmental Product Declaration (EPD) standards, but including scenarios to cover various design possibilities. The global warming potential (GWP) of the prototype array was in the range of 18.4–26.3 gCO2-eq/kWhe. This is comparable with other renewable energy systems, such as wind power. Material production processes have the largest impact, but are largely offset by recycling at the end of life. Operation and maintenance processes, including the production of replacement parts, also provide major contributions to environmental impacts. Comparisons with other technologies are limited by the lack of a standardized way of performing LCA on offshore power generation technologies.