Fiber Metal Laminates (FML) is a classification of metallic materials consisting of several thin layers of metal combined with composite materials. The constraint of FML is the weak bond between the layer material and the core composite. The weak bond between the layer material and the core composite can be influenced by several things, including the absence of an interlock system between the layer material and the core composite so that the strength of the FML composite decreases. In this study, a study was conducted on the shear strength of FML composites using the independent variables of surface roughness and fiber angle orientation. The highest shear strength in FML composite with fiber angle orientation of 45/45° and with a surface roughness value of 2.128 m with a shear strength value of 2.7 MPa
Potensi sumber alam di lingkungan sekitar berupa ketersediaan sumber makanan kambing yang melimpah RT04/RW2, Desa Pakis, Kecamatan Durenan, Kabupaten Trenggalek, pada tahun 2017 telah mulai dimanfaatkan oleh mitra untuk usaha pemeliharaan kambing sebagai upaya dalam meningkatkan kemampuan ekonomi rumah tangga. Dari proses pemeliharaan yang baik dan ketersediaan sumber makanan yang melimpah, sampai dengan sekarang sudah berhasil dibudidayakan 12 ekor kambing dari awal pembudidayaan sejumlah 2 kambing calon indukan. Dalam perjalanannya, dalam menekuni usaha ini, ditemui kendala utama yang menghambat kemajuan dari usaha ini, yaitu kendala kurang idealnya kandang kambing yang ada untuk dapat mendukung keberhasilan usaha tsb. Konstruksi, sanitasi, dan luasan kandang yang ada belum cukup ideal sebagaimana telah diatur atau dipandu dalam suatu Peraturan Menteri Pertanian yang ada. Diyakini bahwa apabila kendala-kendala ini dapat diselesaikan maka akan dapat meningkatkan keberhasilan usaha ini, bahkan berpotensi untuk bisa menjadi model usaha pemeliharan kambing sekala kecil rumah tangga yang dapat dijadikan rujukan rujukan bagi calon-calon pemula usaha pemeliharaan kambing. Sebagai solusinya kepada mitra diberikan pelatihan untuk merancang kandang kambing yang ideal dengan mengacu kepada Peraturan Menteri Pertanian yang ada yang selanjutnya kepada mitra dilatih untuk membuat kandang kambing yang telah dirancang. Kata kunci— Budidaya Kambing, Kandang Kambing, Beton Pracetak
Titanium Grade 2 termasuk jenis bahan yang sering dipergunakan di industri, utamanya pada bahan untuk implan biomedis. Titanium Grade 2 mempunyai sifat perbandingan kekakuan terhadap berat yang baik, tahan terhadap korosi dan memiliki sifat biokompatibel yang baik di dalam tubuh. Namun memiliki konduktifitas panas yang rendah, sehingga perlu memilih perameter pemesinan yang tepat untuk menghasilkan nilai kekasaran permukaan yang baik. Penelitian ini bertujuan untuk mengetahui karakteristik Titanium Grade 2 yaitu kekasaran permukaan hasil pemesinan frais. Desain penelitian menggunakan metode Taguchi L9, dengan 2 faktor dan 3 level. Parameter pemesinan yang digunakan ialah putaran spindel 500; 700; 900 rpm dan kecepatan pemakanan 25; 50; 75 mm/menit. Variabel respon yang diteliti ialah kekasaran permukaan. Proses frais dilakukan menggunakan Mesin CNC Dahlih. Kekasaran permukaan diukur menggunakan Mitutoyo surface roughess tester. Analisis data menggunakan analisis ANOVA. Hasil penelitian menunjukan bahwa ada pengaruh variasi parameter pemesinan terhadap respon kekasaran permukaan. Variabel putaran spindel mempunyai p-value sebesar 0,039 dan variabel gerak makan memiliki p-value sebesar 0,025. Hal ini menunjukkan bahwa kedua variabel bebas tersebut memiliki pengaruh yang signifikan terhadap respon kekasaran permukaan. Kekasaran permukaan terendah dapat dicapai dengan pengaturan putaran spindel sebesar 700 rpm dan kecepatan pemakanan sebesar 25 mm/menit. Kata kunci: titanium grade 2, kekasaran permukaan, frais, anova Daftar RujukanBagno, A., & Di Bello, C. (2004). Surface treatments and roughness properties of Ti-based biomaterials. Journal of Materials Science: Materials in Medicine. https://doi.org/10.1023/B:JMSM.0000042679.28493.7fBruce, 2011. (2013). Analisis Kekasaran Permukaan Dan Getaran Pada Pemesinan Bubut Menggunakan Pahat Putar Modular (Modular Rotary Tools) Untuk Material Titanium 6Al-4V Eli. Journal of Chemical Information and Modeling. https://doi.org/10.1017/CBO9781107415324.004Davim, J. P. (2011). Machining of hard materials. Machining of Hard Materials. https://doi.org/10.1007/978-1-84996-450-0Ganguli, S., & Kapoor, S. G. (2016). Improving the performance of milling of titanium alloys using the atomization-based cutting fluid application system. Journal of Manufacturing Processes. https://doi.org/10.1016/j.jmapro.2016.05.011Karkalos, N. E., Galanis, N. I., & Markopoulos, A. P. (2016). Surface roughness prediction for the milling of Ti-6Al-4V ELI alloy with the use of statistical and soft computing techniques. Measurement: Journal of the International Measurement Confederation. https://doi.org/10.1016/j.measurement.2016.04.039Kiswanto, G., Mandala, A., Azmi, M., & Ko, T. J. (2020). The effects of cutting parameters to the surface roughness in high speed cutting of micro-milling titanium alloy ti-6al-4v. Key Engineering Materials, 846 KEM, 133–138. https://doi.org/10.4028/www.scientific.net/KEM.846.133Mufarrih, A., Istiqlaliyah, H., & Ilha, M. M. (2019). Optimization of Roundness, MRR and Surface Roughness on Turning Process using Taguchi-GRA. In Journal of Physics: Conference Series. https://doi.org/10.1088/1742-6596/1179/1/012099Nithyanandam, J., Das, S. L., & Palanikumar, K. (2015). Inluence of Cutting Parameters in Machining of Titanium Alloy. Indian Journal of Science and Technology, 8(8), 556–562. https://doi.org/10.17485/ijst/2015/v8i/71291Oshida, Y. (2012). Bioscience and Bioengineering of Titanium Materials: Second Edition. Bioscience and Bioengineering of Titanium Materials: Second Edition. https://doi.org/10.1016/C2011-0-07805-5Setyowidodo, I., Sutanto, S., Mufarrih, A., & Sholehah, I. M. (2020). Exhaust temperature and peltier element optimization of thermoelectric generator output. In IOP Conference Series: Materials Science and Engineering. https://doi.org/10.1088/1757-899X/850/1/012007Shucai, Y., Chunsheng, H., & Minli, Z. (2019). A prediction model for titanium alloy surface roughness when milling with micro-textured ball-end cutters at different workpiece inclination angles. International Journal of Advanced Manufacturing Technology. https://doi.org/10.1007/s00170-018-2852-6Soepangkat, B. O. P., Pramujati, B., Effendi, M. K., Norcahyo, R., & Mufarrih, A. M. (2019). Multi-objective Optimization in Drilling Kevlar Fiber Reinforced Polymer Using Grey Fuzzy Analysis and Backpropagation Neural Network–Genetic Algorithm (BPNN–GA) Approaches. International Journal of Precision Engineering and Manufacturing. https://doi.org/10.1007/s12541-019-00017-zTapiero, H., Townsend, D. M., & Tew, K. D. (2003). Trace elements in human physiology and pathology. Copper. Biomedicine and Pharmacotherapy. https://doi.org/10.1016/S0753-3322(03)00012-XThepsonthi, T., & Özel, T. (2012). Multi-objective process optimization for micro-end milling of Ti-6Al-4V titanium alloy. International Journal of Advanced Manufacturing Technology. https://doi.org/10.1007/s00170-012-3980-zWennerberg, A., & Albrektsson, T. (2009). Effects of titanium surface topography on bone integration: A systematic review. Clinical Oral Implants Research. https://doi.org/10.1111/j.1600-0501.2009.01775.x
Wortel merupakan tanaman buah yang juga mengandung vitamin A yang salah satunya bermanfaat bagi mata. Dengan adanya ragam kebutuhan olahan dasar wortel sehingga menjadikan produk olahan wortel meningkat, salah satunya jajanan risol ataupun adonan bubur bayi. Produsen olahan dasar wortel pada industri menengah kebawah masih banyak yang menggunakan cara manual dengan pisau tangan dan membutuhkan waktu yang cukup lama untuk proses perajangan wortel. Tujuan perancangan mesin perajang wortel ini untuk meningkatkan kinerja pada proses perajangan dan mempersingkat waktu produksi dalam usaha olahan bahan dasar wortel. Metode desain dan pembuatan mesin perajang wortel ini meliputi: menentukan mekanisme mesin perajang wortel, perhitungan daya motor yang diperlukan, perhitungan susunan transmisi, perhitungan diameter poros, perhitungan rasio gearbox, pemilihan material, serta pembuatan gambar kerja mesin perajang wortel. Hasil dari desain berupa gambar kerja dan gambar susunan dengan dimensi 940 x 600 x 725 mm, serta material yang dipilih yaitu baja karbon St 37 untuk mendapatkan harga yang ekonomis agar dapat dijangkau oleh industri menengah kebawah dan SS 304 untuk menjaga kualitas produk agar teteap higienis. Total estimasi harga jual mesin perajang wortel kapasitas 75 kg/jam adalah Rp 4.477.000,00.
Shaping and marketing a product in tablet form is an easy and economical alternative to product shaping. Products in tablet form now cover almost all fields, so that the demand for tablet tooling of various sizes and variations continues to increase. As an effort to support the effectiveness and proper industrial planning, it is necessary to carry out an analysis of the machine and material requirements to produce tablet tooling which is the aim of this study. To achieve these objectives, the methods used in this study include product design, operation plan analysis, and calculation of material requirements and number of machines. The result shows that the number of machine requirements to manufacture the die and punch of tablet tooling with the demand of 200 unit/day are two units of power hacksaw, five units of lathe machine, and a unit of milling machine. On the other hand, the material requirements needed in one day are 22.24 m (Ø45 mm x 5 bars) and 12.79 m (Ø18 mm x 3 bars).
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.