Underground structures play an important role in achieving the requirements of rapid urban development such as tunnels, parking garages, facilities, etc. To achieve what is needed, new transportation methods have been proposed to solve traffic congestion problems by using of high-speed railway and subway tunnels. One of the issues in urban spaces due to tunnel excavation is considerable surface settlements that also induce problems for surface structures. There are a variety of published relationships concerned with field measurements and theoretical approaches to evaluating the amount of the maximum surface settlement value due to tunneling. This paper studies the ground surface settlement caused by the Greater Cairo Metro – Line 3 - Phase-1. This project was constructed by a slurry shield Tunnel Boring Machine (TBM). Therefore, this work consists of two parts. The first part presents the details of the project and monitoring results field and laboratory geotechnical investigations in order to determine the soil properties. The second part is to the comparison between the field measurements and theoretical approaches for surface settlement due to tunneling construction. At the end of the works, the results show that the more convenient methods which approach the field measurements, and the major transverse settlement occurs within the area about 2.6 times the diameter of the tunnel excavation. Doi: 10.28991/cej-2020-03091617 Full Text: PDF

Day by day the call to solve traffic congestion problems is increasing. Subway tunnels and high-speed railway are commonly used for transportation. Therefore, tunnel construction induces soil movement, which in turn affects the stability and integrity of adjacent existing buildings. A series of numerical simulations have been established to investigate the effects of tunnel construction of the Greater Cairo Metro–Line 3-Phase-1 on adjacent pile cap foundations of Garage El-Attaba building. Many parameters have been investigated such as tunnel diameter and the distance between pile and tunnel at different tunnel axis and deep and shallow tunnel. After thorough analysis of the results’ simulation, it was found that the tunneling induces additional axial forces and bending moment as well as increasing axial settlement and lateral deflection. Moreover, the results obtained from the parametric study for the shallow and deep tunnel show that the tunnel depth has a much significant effect on piles responses. Finally, the tunnel diameter has an impact on pile responses as well as the pile cap foundation influenced by the tunnel when the tunnel is in very close vicinity of the pile, and its effect is modest to negligible if located far away from the buildings.

In all types of new arch bridge structures, the requirements of the foundation are becoming more and more strict. Under the action of horizontal thrust, the distribution of the internal forces of the pile group in which inclined piles participate in an arch foundation is complicated. In this regard, the horizontal forces of each pile in a pile group and the horizontal bearing performance of each pile in a pile group under the action of total thrust are investigated by establishing a pile group foundation model and a p-y curve difference equation. After an in-depth analysis of the simulation results, it is found that the load distribution calculated by the finite element method is very close to that calculated by the p-y curve method, both in terms of curve shape and numerical value, indicating that the pile top load distribution is close to the actual situation. In addition, the maximum shear force of each pile body occurs at the top of the pile, and the maximum bending moment occurs at the point 1/5 away from the top of the pile. Finally, the nonlinear analysis of the p-y curve method can be well applied to the calculation of bridge pile foundations.

An inclined straight combination support pile can play a better role in deep foundation pit support, especially for the protection of adjacent structural pile foundations. We take a section of the construction of a deep foundation pit project in Wuhan City, Hubei Province as the research object. This paper studies the influence of inclined and straight combination support piles on the bending moment and displacement behavior of adjacent pile foundations during the construction of foundation pits under the influence of different factors such as distance from the excavation surface, pit angle effect, inclined pile tilt angle, pit depth to width ratio, and construction conditions on the adjacent pile foundation using a three-dimensional finite element model. According to the research results, as the distance from the excavation surface increases, the bending moment of the adjacent pile foundation decreases, and the closer the pile is to the foundation pit, the greater the horizontal displacement of the pile; the bending moment and displacement of the pile foundation are supported by the pit angle effect. Moreover, the pile bending moment increases with the increase of the pit depth–width ratio, and the maximum displacement point of the pile body gradually moves down from the middle of the pile body to the bottom of the pile foundation as the excavation depth of the pit increases. In addition, the minimum displacement of the adjacent pile foundation is at the top of the pile, and the maximum displacement is at the middle of the pile. Finally, compared with the static analysis, the whole process of dynamic simulation can reflect the dangerous working conditions in the project construction process, and make a more complete safety control construction plan for the project construction process.

In the construction of mountain tunnels, biased and water-rich strata are often encountered. During tunnel excavation, the fluid–solid coupling has a great influence on the stability of the surrounding rock. This effect will be more severe when the terrain is biased. The bias tunnel points out the asymmetric load of the rocks which are surrounding the tunnels through the drilling or construction process due to the topographic situation. These loads can cause inverse actions during tunnel construction. Therefore, the effect of fluid–solid coupling on the displacement field, stress field, and seepage field of the tunnel surrounding rock under different biased terrains are studied in this paper. In the context of the Youzishu tunnel project, the numerical model is established to define the degree of terrain bias. Besides, the concept of bias coefficient is introduced. To achieve what is needed, 10 sets of increasing bias coefficients are obtained, by changing the inclination of the terrain to study the influence of formation bias degree on tunnel excavation in water-rich formations. After an in-depth analysis of the simulation results, it is found that the influence of fluid–structure interaction cannot be ignored. By analyzing ten groups of data under different working conditions, the biased terrain will aggravate this effect. As far as the displacement field of the surrounding rock is concerned, the biased formation has a greater impact on the deeply buried side than on the shallow-buried side, and has a greater impact on the vault than on the arch bottom. In addition, by analyzing the stress field and seepage field of the surrounding rock, a similar result can be obtained: the influence of formation bias on the deeply buried side is greater than that on the shallow-buried side, and the biased terrain will increase the pore pressure outside the tunnel lining and increase the water inflow. Finally, the locations where the displacement, stress, water pressure, and water inflow are the largest during the tunnel excavation process are found by the simulations and analyzed. Thus, attention can be paid to these locations, permitting a focus on protection during the construction process.

Tunnel construction will inevitably change the surrounding soil’s original stress and displacement fields, affecting the surrounding piles. In addition, the lateral displacement of the soil at the subway tunnel’s face is symmetrically distributed along the tunnel’s central axis, which is greater in the center and smaller on both sides. Therefore, the protection of existing piles and providing a reasonable reinforcement plan have become the focus of attention. Taking a section of Tianjin Metro Line 3 as the research object, this paper studies the influence of the shield tunnel excavation process on the existing pile foundation through three-dimensional finite element simulation. The model has been verified through field monitoring data. Then, parameter analysis has been carried out for two reinforcement measures: grout reinforcement and isolation pile construction. According to the research results, the impact of shield construction on the pile foundation is mainly within the range of twice tunnel diameter to the pile foundation from the front and back of the tunnel face. In addition, the grouting reinforcement has better control of the vertical displacement of the existing pile foundation. The construction of isolation piles can better control the lateral displacement of the existing pile foundation. Have certain reference significance for similar projects.

The safety and continuality of the railway network are guaranteed by carrying out a lot of maintenance interventions on the railway track. One of the most important of these actions is tamping, where railway infrastructure managers focus on optimizing tamping activities in ballasted tracks to reduce the maintenance cost. To this end, this article presents a mixed integer linear programming model of the Tamping Planning Problem (TPP) and investigates the effect of track segmentation method on the optimal solution by three scenarios. It uses an opportunistic maintenance technique to plan tamping actions. This technique clusters many tamping works through a time period to reduce the track possession cost as much as possible. CPLEX 12.6.3 is used in order to solve the TPP instances exactly. The results show that the total number of machine preparations increases by increasing the number of track segments. It is also found that the total costs increase by 6.1% and 9.4% during scenarios 2 and 3, respectively. Moreover, it is better to consider the whole railway track as a single segment (as in scenarios 1) that consists of a set of sections during the tamping planning in order to obtain the optimal maintenance cost. Doi: 10.28991/cej-2021-03091774 Full Text: PDF

In the process of preparing asphalt-based spherical activated carbon, the molten asphalt must be formed into qualified spherical particles through the granulation process. Taking the process of molten asphalt granulation as the research direction, this paper carries out an asphalt rotational viscosity experiment and a thermogravimetric differential thermal experiment (TG–DSC), and obtains the optimal temperature and viscosity values for the asphalt granulation process. The fluent module in ANSYS software is used to input the known asphalt and prilling tower parameters. Based on the asphalt prilling principle, the thermal environment in the prilling tower during on-site melting and asphalt prilling is simulated. The results show that No. 70 matrix asphalt has good fluidity at 135 °C, and that, subsequently, the viscosity of the asphalt is stable and the fluidity of asphalt remains good with the increase in temperature; they also showed that the air velocity is fastest in the central area of the prilling tower, the air temperature is the highest at the top of the tower, and the air temperature in the central area is the lowest at the same height. Finally, a new approach to the granulation process of pitch-based spherical activated carbon is developed, which provides a reference for the basic experimental data and numerical simulation direction for the use of granulation towers to complete the granulation of molten asphalt in industry in the future.