Non-functionalized and functionalized periodic mesoporous phenylene-silicas (Ph-PMOs) with different kinds of amine groups were prepared and their capacity to uptake CO2 and CH4 molecules were experimentally evaluated considering biogas upgrading. It was found that aminopropyl groups grafted to the free silanols of the Ph-PMO displayed the highest selectivity for CO2 gas, adsorbing 26.1 times more CO2 than CH4 at 25 C. The interaction effect of the surface of these materials with the CO2 or CH4 molecules was obtained through the calculation of the Henry constants, and the adsorption mechanisms involved were elucidated from density functional theory calculations. The good synergy between experimental gas adsorption and computational studies suggests that the latter can be used to guide the experimental synthesis of more effective materials. Thus, our computational studies were extended to PMOs with other functional groups having different polarity for predicting interaction energies with CO2 and thus identifying the most promising candidates for experimental synthesis.

No abstract

Periodic mesoporous organosilicas (PMOs) were suggested as potential adsorbents for CO2/CH4 separation because of their large affinities towards CO2 and low interaction with CH4. Herewith, we present a comprehensive computational study on the binding properties of flue gas species with the pore walls of periodic mesoporous phenylene-silica (Ph-PMO) for understanding the possible impact of other gaseous species in the CO2/CH4 separation. The calculations considered three exchange-correlation functionals (PBE, PBE-D2 and M06-2X) based on the density functional theory and the walls of the periodic mesoporous phenylene-silica were modelled within the cluster model approach. The components of the flue gas considered were the diatomic CO, H2, N2, O2 and NO molecules, the triatomic CO2, H2O, H2S and SO2 species, the tetratomic SO3 and NH3 gases and the pentatomic CH4 molecule. The calculated data demonstrate that the presence of H2O, SO2, NH3, H2S and SO3 is a significant threat to CO2 capture by Ph-PMO and suggest that the Ph-PMO material would present high selectivity for CO2 over CH4, CO, H2 or N2 adsorption. The adsorption behaviour of flue gas components in Ph-PMO can be directly related to the experimental proton affinities, basicities or even the polarizabilities of the gaseous molecules.

No abstract

This version is available at https://strathprints.strath.ac.uk/56714/ Strathprints is designed to allow users to access the research output of the University of Strathclyde. Unless otherwise explicitly stated on the manuscript, Copyright © and Moral Rights for the papers on this site are retained by the individual authors and/or other copyright owners. Please check the manuscript for details of any other licences that may have been applied. You may not engage in further distribution of the material for any profitmaking activities or any commercial gain. You may freely distribute both the url (https://strathprints.strath.ac.uk/) and the content of this paper for research or private study, educational, or not-for-profit purposes without prior permission or charge.Any correspondence concerning this service should be sent to the AbstractThe synthesis and characterization of pristine and amine-functionalized periodic mesoporous phenylene-silicas having different pore sizes are reported. We explore the potential of these materials for CO2/CH4 separation, by studying the adsorption of pure CO2and pure CH4 gases. The aminated periodic mesoporous phenylene-silica with the smallest pore size is the best adsorbent to CO2, presenting a Henry's constant of 0.56 mol kg -1 ·bar -1 at 35 ºC. However, the corresponding Henry's constant for CH4 is extremely low (0.06 mol·kg -1 ·bar -1 at 35 ºC). It is observed a direct correlation between the % of T 2 SMP silanols species and the values of the Henry's constants, which may be used to theoretically predict experimental CO2 Henry's constants of potential adsorbents.3

No abstract

Novel electrocatalysts based on zinc oxide (ZnO) and biochars are prepared through a simple and scalable route and are proposed for the electrocatalytic reduction of CO2 (CO2RR). Materials with different weight ratios of ZnO to biochars, namely, pyrolyzed chitosan (CTO) and pyrolyzed brewed waste coffee (CBC), are synthesized and thoroughly characterized. The physicochemical properties of the materials are correlated with the CO2RR to CO performance in a comprehensive study. Both the type and weight percentage of biochar significantly influence the catalytic performance of the composite. CTO, which has pyridinic- and pyridone-N species in its structure, outperforms CBC as a carbon matrix for ZnO particles, as evidenced by a higher CO selectivity and an enhanced current density at the ZnO_CTO electrode under the same conditions. The study on various ZnO to CTO weight ratios shows that the composite with 40.6 wt % of biochar shows the best performance, with the CO selectivity peaked at 85.8% at −1.1 V versus the reversible hydrogen electrode (RHE) and a CO partial current density of 75.6 mA cm–2 at −1.3 V versus RHE. It also demonstrates good stability during the long-term CO2 electrolysis, showing high retention in both CO selectivity and electrode activity.

N-alkylation reaction of amine functionalized phenylene moieties in crystal-like mesoporous silica is successfully achieved with about 87% of conversion in two reaction cycles. A potassium iodide catalyzed method commonly used for the selective N-monoalkylation of aniline is adapted and optimized to the N-monoalkylation reactions of the amine functionalized periodic mesoporous phenylene-silica (NH2-PMO) under microwave irradiation with preservation of the ordered mesostructure and of the crystal-like molecular scale periodicity of the material. This functionalization opens an avenue for the preparation of new materials with different amino-alkyl groups specially designed for a desired application, namely on the adsorption or catalytic fields.