No abstract

No abstract

No abstract

No abstract

This study proposes an optimal control scheme for a permanent-magnet linear synchronous generator (PMLSG) using the state feedback control (SFC) method plus the grey wolf optimisation (GWO) algorithm. First, A novel state-space model of linear PMLSG is established in order to obtain desired dynamics and enough power when used for the smooth wave energy. Second, the GWO algorithm is adopted to acquire weighting matrices Q and R in the process of optimising linear quadratic regulator (LQR). What is more, a penalty term is brought into the fitness index to reduce the overstrike of output voltage and keep the rate of work more stable. Finally, optimal LQR-based SFC with and without penalty term and proportionalintegral (PI) controllers are compared both in simulations and in experiments. Results clearly prove that the proposed optimal control strategy performs a better response when compared to other strategies.

Electrically excited synchronous motor (EESM) has the characteristics of high order, nonlinear and strong coupling, so it is difficult to be controlled. However, it has the advantages of adjustable power factor, high efficiency, and high precision torque control, so it is widely used in high-power applications. The accuracy of a flux observer influences the speed control system of EESM. Based on state observer in modern control theory and electrical excitation synchronous machine state equation, a reduced-order flux observer is designed. Using the first-order difference method and forward bilinear transformation method, the reduced-order flux observer is discrete, and the stability of the motor system is analyzed. The analysis shows that the stability of the system using the bilinear transformation method is better than that using the first order forward difference method. In motor operation, motor parameters will be affected by the factors of temperature, magnetic saturation, and motor frequency. In this paper, the influence of parameter variation on the motor system is studied by using the variation of the pole distribution. Finally, the speed regulation system using the reduced-order observer is simulated, which verifies the accuracy of the reduced-order flux observer observation.

Permanent magnet synchronous hub motors (PMSHMs) have been gradually introduced into the applications of electric vehicles. On this basis, the six-phase motor has the characteristics of high reliability, high power density and low torque ripple. And its fault tolerance is a large advantage compared with the three-phase motor. The multi-phase permanent magnet synchronous motor is redundant due to the number of phases. When the motor fails, it does not have to stop running, merely adjust its control mode and enter the fault-tolerant compensation control algorithm to resume the operation of the system. The FCS-MPC algorithm can replace the cascade structure in the traditional control and eliminate the modulation module. This makes it have good steady-state performance. The speed response is also improved. It can be combined with multiple control objectives with strong flexibility by simply changing the objective function. The prediction model is compensated. Finally, the experimental results show the effectiveness of this method.

The spindle motor in machine tool mostly adopt induction motor. In order to achieve dynamic control of the magnetic field and torque, one needs to estimate the synchronous induction motor electrical angle. The calculation is based on the basis of the rotor time constant. The accuracy of the parameter measurements will affect the performance significantly. How to improve the spindle motor torque is also an important object in development indirect control of induction motor. Through the maximum torque per amperage control (MTPA) method, one can effectively maximize the torque. In general, the field current and torque current will be set to the same values. But the simulation is found that when there are severe magnetic saturation phenomenon, torque will be less than expected. Therefore, we will use the exciting flux method to achieve maximum torque. This study performs the rotor time constant identification and exciting flux control method by Simulink simulation.