No abstract

No abstract

This work describes the development of a vision-based tactile sensor system that utilizes the image-based information of the tactile sensor in conjunction with input loads at various motions to train the neural network for the estimation of tactile contact position, area, and force distribution. The current study also addresses pragmatic aspects, such as choice of the thickness and materials for the tactile fingertips and surface tendency, etc. The overall vision-based tactile sensor equipment interacts with an actuating motion controller, force gauge, and control PC (personal computer) with a LabVIEW software on it. The image acquisition was carried out using a compact stereo camera setup mounted inside the elastic body to observe and measure the amount of deformation by the motion and input load. The vision-based tactile sensor test bench was employed to collect the output contact position, angle, and force distribution caused by various randomly considered input loads for motion in X, Y, Z directions and RxRy rotational motion. The retrieved image information, contact position, area, and force distribution from different input loads with specified 3D position and angle are utilized for deep learning. A convolutional neural network VGG-16 classification modelhas been modified to a regression network model and transfer learning was applied to suit the regression task of estimating contact position and force distribution. Several experiments were carried out using thick and thin sized tactile sensors with various shapes, such as circle, square, hexagon, for better validation of the predicted contact position, contact area, and force distribution.

This paper presents a simple camera calibration method for estimating human height in video surveillance. Given that most cameras for video surveillance are installed in high positions at a slightly tilted angle, it is possible to retain only three calibration parameters in the original camera model, namely the focal length, the tilting angle and the camera height. These parameters can be directly estimated using a nonlinear regression model from the observed head and foot points of a walking human instead of estimating the vanishing line and point in the image, which is extremely sensitive to noise in practice. With only three unknown parameters, the nonlinear regression model can fit data efficiently. The experimental results show that the proposed method can predict the human height with a mean absolute error of only about 1.39 cm from ground truth data.

With the rapid growth of organic light-emitting diode (OLED) display devices, the industrial manufacturing of OLED panels is currently an expanding global reality. Regarding quality control, automatic defect detection and classification are undoubtedly indispensable. Although defect detection systems have been widely considered in the literature, classification systems have not received appropriate attention. This study proposes the design of an efficient and high-performance system for defect classification by combining well-known machine-learning algorithms: support vector machine, random forest (RF), and k-nearest neighbours. To begin, possible features are designed and feature selection using principal component analysis and RF is investigated to automatically select the most effective features. Then, a hierarchical structure of classifiers is proposed for efficiently adjusting the rates of true defect and fake defect classification. The proposed system is evaluated over a database of 3502 images captured from real OLED display devices in different illumination conditions. The defects in the database are divided into 10 classes corresponding to the types of true defect and fake defect. The experiments confirm that the proposed system can achieve an accuracy of up to 94.0% for the binary classification of true defect and fake defect and an overall recognition rate of 86.3% for the 10 sub-classes. ARTICLE HISTORY

No abstract

No abstract

No abstract