No abstract

This study investigated the decomposition of aqueous phenol by direct current (DC) water plasma. The operation of DC water plasma was carried out in the absence of inert gases or air injected and cooling-controlled and pressure-controlled devices. The results indicated that 1 mol.% (52.8 g L(-1)) phenol was drastically decomposed by DC water plasma touch with energy efficiencies of 1.9 x 10(-8)-2.2 x 10(-8) mol J(-1). Also, the value of chemical oxygen demand (COD) was reduced from 100 000 mg L(-1) down to 320 mg L(-1) over a short retention time. The maximum decomposition rate of the COD was 258 mg COD min(-1) for the arc power of 0.91 kW. In the effluent analysis, H(2) (63-68%), CO (3.6-6.3%), CO(2) (25.3-28.1%) were major products in the exhaust gas and CH(4), C(2)H(2), HCOOH and C(6)H(6) in trace level. Further, HCOOH and HCHO were observed in the liquid effluents. Within the current paper, the results indicated that the DC water plasma torch is capable of an alternative green technology for phenol wastewater containing high COD.

Glow discharge plasma was successfully applied for effective removal of the organic template P-123 from SBA-15 ordered mesoporous silica at near-room-temperature (below 50 °C) and in a short operation time (2 h). The as-made SBA-15 treated with glow discharge exhibited a larger surface area of 1025 m(2) g(-1) with larger pores and microspore volume as compared with that of conventional calcination (550 °C and 5 h, 827 m(2) g(-1)). In addition to less structural shrinkage, the plasma-prepared SBA-15 showed significantly increased silanol density from 5.4 to 6.6-7.6 mmol g(-1), which led directly to higher amine loading from 1.8 to 3.0 mmol g(-1). Consequently, the plasma-treated sample showed 77% more CO2 capacity and 60% higher CO2/N2 selectivity than the conventionally treated sample at 0.15 bar and 25 °C. The advantage of using glow discharge plasma for low-temperature template removal for achieving enhanced performance for CO2 adsorption is clearly demonstrated.

No abstract

No abstract

No abstract

Providing safe drinking water and clean water is becoming a more challenging task all around the world. Although some critical issues and limits remain unsolved, implementing ecologically sustainable nanomaterials (NMs) with unique features, e.g., highly efficient and selective, earth-abundance, renewability, low-cost manufacturing procedures, and stability, has become a priority. Carbon nanoparticles (NPs) offer tremendous promise in the sectors of energy and the environment. However, a series of far more ecologically friendly synthesis techniques based on natural, renewable, and less expensive waste resources must be explored. This will reduce greenhouse gas emissions and harmful material extraction and assist the development of green technologies. The progress achieved in the previous 10 years in the fabrication of novel carbon-based NMs utilizing waste materials as well as natural precursors is reviewed in this article. Research on carbon-based NPs and their production using naturally occurring precursors and waste materials focuses on this review research. Water treatment and purification using carbon NMs, notably for industrial and pharmaceutical wastes, has shown significant potential. Research in this area focuses on enhanced carbonaceous NMs, methods, and novel nano-sorbents for wastewater, drinking water, groundwater treatment, as well as ionic metal removal from aqueous environments. Discussed are the latest developments and challenges in environmentally friendly carbon and graphene quantum dot NMs.

No abstract