Bentonite clay mineral is widely present in the Gourougou Volcanic Massif and its satellites located in NE Morocco. It originated from the alteration of pyroclastic flows in shallow marine water in a lagoon lake environment (Ibourhardayn deposit). All studied samples were collected from that area and analysed accordingly in order to characterize and identify their components. Experimental techniques used included X-ray diffraction, Fourier transform infrared spectroscopy, X-ray fluorescence and the geotechnical characterization of the clay fraction and Atterberg limits. Granulometric analysis exhibited the presence of a clay fraction (<2 µm) ranging from 9.2 to 32.4%. The geotechnical study showed that the bentonites studied were generally very plastic, with plasticity index values ranging from 19.4 to 46.6%, and are also characterized by very high liquidity limits of 37.3–67%. A high water retention capacity with water contents ranging from 8.2 to 40.7% indicated that Ibourhardayn bentonites have important swelling properties. Mineralogical results showed that all specimens were mostly composed of montmorillonite alongside other clay minerals. Some crystalline impurities were also detected by X-ray diffraction and Fourier transform infrared spectra.
The main objective of this work was to contribute to the reduction in the contamination of phenolic compounds contained in margin by an adsorption process on two types of raw bentonite. The margin used in the studies was collected from a semi-modern oil mill located in the Nador–Morocco region. The results of the physico-chemical analyses showed that the effluents of the oil mills showed that they are highly polluted, particularly in terms of the total suspended solids (TSS), chemical oxygen demand (COD), and iron content of around 154.82 (mg/L), and copper content of 31.72 (mg/L). The mineralogy of bentonites studied by X-ray diffraction (XRD) reveals the existence of two types of montmorillonite; theoretically, the diffraction peak (001) of the montmorillonite appears at 15 Å, with a basal spacing that corresponds to a calcium pole, and the diffraction peak (001) appears at 12Å, with a basal spacing that corresponds to a sodium pole. The specific surface area of the bentonite used is characterized by a large specific surface area, varying between 127.62 m2·g−1 and 693.04 m2·g−1, which is due to the presence of hydrated interleaved cations. This surface is likely to increase in aqueous solution depending on the solid/liquid ratio that modulates the degree of hydration. With a high cation exchange capacity (CEC) (146.54 meq/100 g), samples of margin mixed with raw bentonites at different percentages vary between 5% and 100%. The potential of Moroccan bentonite for the phenol adsorption of 9.17 (g/L) from aqueous solutions was investigated. Adsorption tests have confirmed the effectiveness of these natural minerals in reducing phenolic compounds ranging from 8.72% to 76.23% contained in the margin and the efficiency of heavy metal retention through microelements on raw bentonites. The very encouraging results obtained in this work could aid in the application of adsorption for the treatment of margin.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.