BackgroundInformation on the spatial distribution of aboveground biomass (AGB) over large areas is needed for understanding and managing processes involved in the carbon cycle and supporting international policies for climate change mitigation and adaption. Furthermore, these products provide important baseline data for the development of sustainable management strategies to local stakeholders. The use of remote sensing data can provide spatially explicit information of AGB from local to global scales. In this study, we mapped national Mexican forest AGB using satellite remote sensing data and a machine learning approach. We modelled AGB using two scenarios: (1) extensive national forest inventory (NFI), and (2) airborne Light Detection and Ranging (LiDAR) as reference data. Finally, we propagated uncertainties from field measurements to LiDAR-derived AGB and to the national wall-to-wall forest AGB map.ResultsThe estimated AGB maps (NFI- and LiDAR-calibrated) showed similar goodness-of-fit statistics (R2, Root Mean Square Error (RMSE)) at three different scales compared to the independent validation data set. We observed different spatial patterns of AGB in tropical dense forests, where no or limited number of NFI data were available, with higher AGB values in the LiDAR-calibrated map. We estimated much higher uncertainties in the AGB maps based on two-stage up-scaling method (i.e., from field measurements to LiDAR and from LiDAR-based estimates to satellite imagery) compared to the traditional field to satellite up-scaling. By removing LiDAR-based AGB pixels with high uncertainties, it was possible to estimate national forest AGB with similar uncertainties as calibrated with NFI data only.ConclusionsSince LiDAR data can be acquired much faster and for much larger areas compared to field inventory data, LiDAR is attractive for repetitive large scale AGB mapping. In this study, we showed that two-stage up-scaling methods for AGB estimation over large areas need to be analyzed and validated with great care. The uncertainties in the LiDAR-estimated AGB propagate further in the wall-to-wall map and can be up to 150%. Thus, when a two-stage up-scaling method is applied, it is crucial to characterize the uncertainties at all stages in order to generate robust results. Considering the findings mentioned above LiDAR can be used as an extension to NFI for example for areas that are difficult or not possible to access.

Lidar remote sensing has proven to be a powerful tool for estimating ground elevation, canopy height, and additional vegetation parameters, which in turn are valuable information for the investigation of ecosystems. Spaceborne lidar systems, like the Global Ecosystem Dynamics Investigation (GEDI), can deliver these height estimates on a near global scale. This paper analyzes the accuracy of the first version of GEDI ground elevation and canopy height estimates in two study areas with temperate forests in the Free State of Thuringia, central Germany. Digital terrain and canopy height models derived from airborne laser scanning data are used as reference heights. The influence of various environmental and acquisition parameters (e.g., canopy cover, terrain slope, beam type) on GEDI height metrics is assessed. The results show a consistently high accuracy of GEDI ground elevation estimates under most conditions, except for areas with steep slopes. GEDI canopy height estimates are less accurate and show a bigger influence of some of the included parameters, specifically slope, vegetation height, and beam sensitivity. A number of relatively high outliers (around 9–13% of the measurements) is present in both ground elevation and canopy height estimates, reducing the estimation precision. Still, it can be concluded that GEDI height metrics show promising results and have potential to be used as a basis for further investigations.

Woody vegetation cover affects several ecosystem processes including carbon and water cycling, energy fluxes, and fire regimes. In order to understand the dynamics of savanna ecosystems, information on the spatial distribution of woody vegetation over large areas is needed. In this study we sought to assess multi-temporal ALOS PALSAR L-band backscatter to map woody cover in southern African savannas. The SAR data were acquired from the JAXA archive, covering various modes and seasons between 2007 and 2010. We used high resolution airborne LiDAR data as reference data to interpret SAR parameters (including backscatter intensities and polarimetric decomposition components), to develop SAR-based models as well as to validate SAR-based woody cover maps. The LiDAR survey was carried out in April 2008 with the Carnegie Airborne Observatory (CAO, http://cao.ciw.edu). The highest correlations to the reference data were obtained from SAR backscatters of the dry season, followed by the wet season, and the end of the wet season. The volume components from polarimetric decompositions (Freeman-Durden, Van Zyl) were calculated for the end of wet season, and showed similar correlations to the LiDAR data, when compared to cross-polarized backscatters (HV). We observed increased correlation between the SAR and LiDAR datasets with an increase in the spatial scale at which datasets were integrated, with an optimum value at 50 m. We modeled woody cover using three scenarios: (1) a single date scenario (i.e., woody cover map based on a single SAR image), (2) a multi-seasonal scenario (i.e., woody cover map based on SAR images from the same year and different seasons, based on key phonological difference), and (3) a multi-annual scenario (i.e., woody cover map based on SAR data from different years). Predicted SAR-based woody cover map based on Fine Beam Dual Polarization dry season SAR backscatters of all years yielded the best performance with an R² of 0.71 and RMSE of 7.88%. However, single dry season SAR backscatter achieved only a slightly lower accuracy (R²=0.66, RMSE=8.45%) as multi-annual SAR data, suggesting that a single SAR scene from the dry season can also be used for woody cover mapping. Moreover, we investigated the impact of the number of samples on the model prediction performance and showed the benefits of a larger spatially explicit LiDAR dataset compared to much 3 smaller number of samples as they can be collected in the field. Collectively, our results demonstrate that L-band backscatter shows promising sensitivity for the purposes of mapping woody cover in southern African savannas, particularly during the dry season leaf-off conditions.