The need to feed an ever-increasing world population makes it obligatory to reduce the millions of tons of avoidable perishable waste along the food supply chain. A considerable share of these losses is caused by non-optimal cold chain processes and management. This Theme Issue focuses on technologies, models and applications to monitor changes in the product shelf life, defined as the time remaining until the quality of a food product drops below an acceptance limit, and to plan successive chain processes and logistics accordingly to uncover and prevent invisible or latent losses in product quality, especially following the first-expired-first-out strategy for optimized matching between the remaining shelf life and the expected transport duration. This introductory article summarizes the key findings of this Theme Issue, which brings together research study results from around the world to promote intelligent food logistics. The articles include three case studies on the cold chain for berries, bananas and meat and an overview of different post-harvest treatments. Further contributions focus on the required technical solutions, such as the wireless sensor and communication system for remote quality supervision, gas sensors to detect ethylene as an indicator of unwanted ripening and volatile components to indicate mould infections. The final section of this introduction discusses how improvements in food quality can be targeted by strategic changes in the food chain.

Shelf life of fresh fruits and vegetables is greatly influenced by environmental conditions. Increasing temperature usually results in accelerated loss of quality and shelf-life reduction, which is not physically visible until too late in the supply chain to adjust logistics to match shelf life. A blackberry study showed that temperatures inside pallets varied significantly and 57% of the berries arriving at the packinghouse did not have enough remaining shelf life for the longest supply routes. Yet, the advanced shelf-life loss was not physically visible. Some of those pallets would be sent on longer supply routes than necessary, creating avoidable waste. Other studies showed that variable pre-cooling at the centre of pallets resulted in physically invisible uneven shelf life. We have shown that using simple temperature measurements much waste can be avoided using ‘first expiring first out’. Results from our studies showed that shelf-life prediction should not be based on a single quality factor as, depending on the temperature history, the quality attribute that limits shelf life may vary. Finally, methods to use air temperature to predict product temperature for highest shelf-life prediction accuracy in the absence of individual sensors for each monitored product have been developed. Our results show a significant reduction of up to 98% in the root-mean-square-error difference between the product temperature and air temperature when advanced estimation methods are used.

No abstract