Flux tube simulations of plasma turbulence in stellarators and tokamaks typically employ coordinates which are aligned with the magnetic field lines. Anisotropic turbulent fluctuations can be represented in such field-aligned coordinates very efficiently, but the resulting non-trivial boundary conditions involve all three spatial directions, and must be handled with care. The standard "twistand-shift" formulation of the boundary conditions [Beer, Cowley, Hammett Phys. Plasmas 2, 2687(1995] was derived assuming axisymmetry and is widely used because it is efficient, as long as the global magnetic shear is not too small. A generalization of this formulation is presented, appropriate for studies of non-axisymmetric, stellarator-symmetric configurations, as well as for axisymmetric configurations with small global shear. The key idea is to replace the "twist" of the standard approach (which accounts only for global shear) with the integrated local shear. This generalization allows one significantly more freedom when choosing the extent of the simulation domain in each direction, without losing the natural efficiency of field-line-following coordinates. It also corrects errors associated with naive application of axisymmetric boundary conditions to non-axisymmetric configurations. Simulations of stellarator turbulence that employ the generalized boundary conditions require much less resolution than simulations that use the (incorrect, axisymmetric) boundary conditions. We also demonstrate the surprising result that (at least in some cases) an easily implemented but manifestly incorrect formulation of the boundary conditions does not change important predicted quantities, such as the turbulent heat flux. * mfmartin@umd.edu

Impurity temperature screening is a favourable neoclassical phenomenon involving an outward radial flux of impurity ions from the core of fusion devices. Quasisymmetric magnetic fields lead to intrinsically ambipolar neoclassical fluxes that give rise to temperature screening for low enough $\unicode[STIX]{x1D702}^{-1}\equiv d\ln n/d\ln T$ . In contrast, neoclassical fluxes in generic stellarators will depend on the radial electric field, which is predicted to be inward for ion-root plasmas, potentially leading to impurity accumulation. Here, we examine the impurity particle flux in a number of approximately quasisymmetric stellarator configurations and parameter regimes while varying the amount of symmetry breaking in the magnetic field. For the majority of this work, neoclassical fluxes have been obtained using the SFINCS drift-kinetic equation solver with electrostatic potential $\unicode[STIX]{x1D6F7}=\unicode[STIX]{x1D6F7}(r)$ , where $r$ is a flux-surface label. Results indicate that achieving temperature screening is possible, but unlikely, at low-collisionality reactor-relevant conditions in the core. Thus, the small departures from symmetry in nominally quasisymmetric stellarators are large enough to significantly alter the neoclassical impurity transport. A further look at the magnitude of these fluxes when compared to a gyro-Bohm turbulence estimate suggests that neoclassical fluxes are small in configurations optimized for quasisymmetry when compared to turbulent fluxes.

No abstract