No abstract

In this study, a new class of heterogeneous membranes based on cellulose acetate (CA) polymer and a complex filler clay‐silica nanowires (SiO2NWs) was investigated for potential biomedical applications. SiO2NWs were synthesized using natural clay through a facile sol–gel method and were dispersed in the polymer solution by sonication in the 1.25, 2.5, and 5% weight ratio to the CA acetate polymer. Membranes were subsequently prepared via phase inversion by precipitation of the CA polymer in water. The pristine CA membrane and SiO2NWs based nanocomposites membranes were characterized using different characterization techniques. The presence of the SiO2NWs in the CA membrane was found to significantly enhance the protein retention, water wettability and thermal as well as mechanical properties in comparison to the pristine CA membrane. Water flows studies at different temperatures and the retention of bovine serum albumin have been studied and the nanocomposite membranes were found to exhibit superior performances compared with the pristine CA membranes. SiO2NWs‐CA membranes showed a much higher stability to the water temperature change during separation than CA membranes. Morphological changes clearly revealed that the composite membrane were much more compact than the pristine CA membranes. The rabbit dermal fibroblasts cell viability in cultures after 72 hr of incubation was found to be greater than 80%. These newly synthesized composite membranes exhibit a high potential to be used for various medical applications because of their non‐cytotoxic characteristics. Copyright © 2016 John Wiley & Sons, Ltd.

The goal of this paper was the design, development, and characterization of some new composites, based on collagen and dextran as natural polymers and zinc oxide as antimicrobial, to be used in wound healing. Collagen hydrogels with various concentrations of dextran and zinc oxide were investigated in terms of rheological analysis. The spongious composites, obtained by freeze-drying of hydrogels, were evaluated by morphology (SEM), water uptake, and biological (enzymatic biodegradation) analysis. All the results were strongly influenced by the nature and concentration of composite components. Based on the performances of the hydrogels, stationary rheometry, porous structure, morphology, and biological behavior, the antimicrobial spongious composite based on collagen and dextran with 50% ZnO were the most promising for future applications in wound dressing and a biomaterial with high potential in skin regeneration.

No abstract

From an environmental and cost-effective perspective, a number of research challenges can be found for electronics, household, but especially in the automotive polymer parts industry. Reducing synthesis steps, parts coating and painting, or other solvent-assisted processes, have been identified as major constrains for the existing technologies. Therefore, simple polymer processing routes (mixing, extrusion, injection moulding) were used for obtaining PMMA/HNT nanocomposites. By these techniques, an automotive-grade polymethylmethacrylate (PMMA) was modified with halloysite nanotubes (HNT) and an eco-friendly additive N,N′-ethylenebis(stearamide) (EBS) to improve nanomechanical properties involved in scratch resistance, mechanical properties (balance between tensile strength and impact resistance) without diminishing other properties. The relationship between morphological/structural (XRD, TEM, FTIR) and tribological (friction) properties of PMMA nanocomposites were investigated. A synergistic effect was found between HNT and EBS in the PMMA matrix. The synergy was attained by the phase distribution resulted from the selective interaction between partners and favourable processing conditions. Modification of HNT with EBS improved the dispersion of nanoparticles in the polymer matrix by increasing their interfacial compatibility through hydrogen bonding established by amide groups with aluminol groups. The increased interfacial adhesion further improved the nanocomposite scratch resistance. The PMMA/HNT-EBS nanocomposite had a lower coefficient of friction and lower scratch penetration depth than PMMA/HNT nanocomposite.

Future materials in the field of thermoplastics require a lower impact on the environment. Actual thermoplastic materials also require "greener" additives for thermal and fire resistance profile. In this work, some of the recent solutions for halogen-free flame retardants were discussed in the context of viable routes with economical and industrial relevance. The fire retardant mechanism was discussed in order to imagine new solutions for future additives. Some of the main (inorganic, organic or hybrid) flame retardants can be used as common platform for the next classes of thermoplastic composites (synthetic, natural, or bio-based). The new generation of flame retardants (based on the emerging solutions) will have to surpass two major barriers: the cost effectiveness and the need for high concentration (which usually affects other properties).

No abstract

No abstract