The quality of particle boards elaborated with waste material from sawing, veneer and slicing processes was evaluated. The effect of sawdust containing bark and the effect of a hydrophobic agent on the physicomechanical properties of the board were determined. Board quality was determined based on the physicomechanical properties of swelling, tension and flection of the DIN standard; water absorption according to ASTM 1037 standard. Results indicated that the waste materials used are appropriate for the elaboration of particle boards, fulfilling DIN 68 763 standard in the physicomechanical properties. The percentage of bark containing waste from the Vista Alegre Sawmill did not significantly affect the mechanical properties of the boards, however they influenced the physical properties negatively. Hydrophobe decreased the levels of swelling and water absorption, without altering the mechanical properties of the boards with no-bark sawdust. In the tension trial, no difference was observed between the boards with bark and those that contained no-bark sawdust.
Se analiza la factibilidad técnica de fabricar tableros de partículas usando como materia prima astillas provenientes de renovales de roble (Nothofagus obliqua) y raulí (Nothofagus alpina). Los objetivos específicos son determinar las propiedades físicas y mecánicas de los tableros, evaluando la influencia de la corteza y ramas en dichas propiedades y comparando, además, las propiedades y resistencias de tableros encolados con urea y fenol-formaldehído. El material de ensayo provino de árboles cuya edad fluctuaba entre 15 y 20 años. Las propiedades físico-mecánicas de los tableros se evaluaron utilizando la norma DIN 68763.
Se aplica un programa de secado convencional para madera aserrada de tepa (Laurelia phillippiana Looser) de 1 x 6 - 10n X 3,60 m. Las condiciones de secado se evalúan en función de la calidad final de las piezas muestreadas. La madera utilizada en este estudio proviene de predios ubicados en la Región de Los Lagos y fue proporcionada por la empresa EMASIL S.A. El tiempo de secado empleado es de 96 horas para disminuir el contenido de humedad de 53.47% hasta 12,93%, lo que permite calificar el programa utilizado como satisfactorio.
El estudio de productos que puedan reemplazar al PCP-Na en la prevención de la mancha azul del pino requiere de métodos de laboratorio que permitan encontrar la dosis mínima efectiva (d.m.e.) de un preservante in vitro, y así obtener el rango de concentraciones que debe ser empleado en ensayos in situ. De modo que, es importante saber si la d.m.e. obtenida en una prueba de laboratorio se acerca a los resultados de terreno. En este trabajo se prueba la eficacia de dos preservantes antimancha alternativos al PCP-Na en la prevención del ataque de Ceratocystis pilifera (Fries) C. Moreau, sobre madera de Pino Pinus radiata D. Don), según las específicaciones de la norma ASTM D-4445-84. Se compara los resultados, con los que se obtiene de un ensayo montado en la cancha de secado de un aserradero. BUSAN 1009 y SINESTO B son efectivos en laboratorio al 2.0% y 5.0% respectivamente. En terreno, la d.m.e. de ambos preservantes no supera estos valores.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
customersupport@researchsolutions.com
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.