The use of shape-controlled metal nanoparticles has produced not only a clear enhancement in the electrocatalytic activity of different reactions of interest but also a better understanding of the effect of the surface structure on nanoscaled materials. However, it is well-accepted that a correct understanding of the correlations between shape/surface structure and electrochemical reactivity indispensably requires the use of clean surfaces. In this regard, and considering that most of the synthetic methodologies available in the literature for the preparation of these shaped metal nanoparticles employ capping agents, the development of effective surface cleaning methodologies able to remove such capping agents from the surface of the corresponding nanoparticles, becomes an extremely important prerequisite to subsequently evaluate their electrocatalytic properties for any reaction of interest.Consequently, in this contribution, we summarize the most relevant advances about surface cleaning procedures applied to different shaped metal nanoparticles for electrocatalytic purposes. It is worth mentioning that this work will only include contributions in which the surface cleanness of the samples is specifically evaluated using well-established electrochemical tools.
The direct CO2 electrochemical reduction on model platinum single crystal electrodes Pt(hkl) is studied in [C2mim(+)][NTf2(-)], a suitable room temperature ionic liquid (RTIL) medium due to its moderate viscosity, high CO2 solubility and conductivity. Single crystal electrodes represent the most convenient type of surface structured electrodes for studying the impact of RTIL ion adsorption on relevant electrocatalytic reactions, such as surface sensitive electrochemical CO2 reduction. We propose here based on cyclic voltammetry and in situ electrolysis measurements, for the first time, the formation of a stable adduct [C2mimH-CO2(-)] by a radical-radical coupling after the simultaneous reduction of CO2 and [C2mim(+)]. It means between the CO2 radical anion and the radical formed from the reduction of the cation [C2mim(+)] before forming the corresponding electrogenerated carbene. This is confirmed by the voltammetric study of a model imidazolium-2-carboxylate compound formed following the carbene pathway. The formation of that stable adduct [C2mimH-CO2(-)] blocks CO2 reduction after a single electron transfer and inhibits CO2 and imidazolium dimerization reactions. However, the electrochemical reduction of CO2 under those conditions provokes the electrochemical cathodic degradation of the imidazolium based RTIL. This important limitation in CO2 recycling by direct electrochemical reduction is overcome by adding a strong acid, [H(+)][NTf2(-)], into solution. Then, protons become preferentially adsorbed on the electrode surface by displacing the imidazolium cations and inhibiting their electrochemical reduction. This fact allows the surface sensitive electro-synthesis of HCOOH from CO2 reduction in [C2mim(+)][NTf2(-)], with Pt(110) being the most active electrode studied.
Parent literacy programs should supplement Mexican American mothers' communication behaviors and interactive reading strategies to improve effectiveness and participation.
The number of publications devoted to studying electrochemical reactions in room temperature ionic liquids (RTILs) is constantly growing, but very few of them have been devoted to defining proper experimental conditions to obtain reproducible electrochemical results. In this work, we demonstrate that the combination of a proper RTIL purification treatment and a filtered Ar gas stream allow us to obtain featureless voltammograms in [C4mim][BF4], [C4mim][NTf2], and [C4m2im][NTf2], which otherwise present signals associated with different types of impurities such as water and some minor electroactive impurities acquired during the RTIL synthesis process. Moreover, we demonstrate that bubbling Ar, or another inert gas, through the electrolyte in order to purge O2 dissolved in RTILs is one of the major sources of water and O2 impurities incorporated in RTILs within the electrochemical cell. To overcome this source of water uptake, we have incorporated a gas stream purification filter before the gas reaches the RTIL in the electrochemical cell. To illustrate the effect of these impurities in relevant electrocatalytic studies, we study the electrocatalytic reduction of CO2 on Pt nanoparticles and the key role of an appropiate filter when the CO2 gas stream is bubbled within imidazolium based RTILs. Our cyclic voltammetric studies point out that CO2 electroreduction on Pt nanoparticles only presents activity in [C4mim][NTf2] and [C4m2im][NTf2], thus suggesting that the C-2 position on the imidazolium ring is not the key position in CO2 electrochemical reduction. In contrast, the same Pt nanoparticles are inactive towards CO2 electroreduction in [C4mim][BF4], which is a more hydrophilic RTIL.
The electrocatalytic activity of synthesized quasi-spherical Pt nanoparticles (NPs) have been studied taking as a model the CO ads electrooxidation reaction in two imidazolium-based ionic liquids such as 1-
Platinum and other metals are very scarce materials widely used in the energy and transportation sector among other sectors. Obtaining Platinum is becoming more difficult due to its scarcity on earth and because of the high amount of energy and water used for its extraction. In this regard, the recycling of platinum is necessary for sustainable technologies and for reaching a circular economy towards this expensive and rare metal. Conventional methods for platinum recycling make use of enormous amounts of energy for its recovery, which makes them not very attractive for industry implementation. Furthermore, these processes generate very toxic liquid streams and gas wastes that must be further treated, which do not meet the green environmental point of view of platinum recycling. Consequently, new advanced technologies are arising aiming to reach very high platinum recovery rates while being environmentally friendly and making a huge reduction of energy use compared with the conventional methods. In this review, conventional platinum recovery methods are summarized showing their limitations. Furthermore, new and promising approaches for platinum recovery are reviewed to shed light on about new and greener ways for a platinum circular economy.
Thiol-containing compounds such as L-cysteine have been demonstrated to play an important role in metabolism and cellular growth, acting as powerful antioxidants.Consequently, their analytical determination in biological media has received a considerable amount of attention. In this work, an electrochemical sensor for the accurate electroanalytical determination of L-cysteine is proposed, based upon a Co(II)-phthalocyanine nanoparticle bulk modified disposable screen-printed graphite electrode (CoPc-SPE). This CoPc mediator has previously been introduced through its incorporation within the bulk of the ink formulation, avoiding the drop-casting method, which has been shown to give a low reproducibility. Cyclic (CV) and Square Wave
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.