No abstract

Analytical solutions for the deformation, penetration, and perforation of composite plates and sandwich panels subjected to quasi-static punch indentation and projectile impact are derived. Discrete spring-mass models are used to calculate the impact response of the composite plates and sandwich panels. Equivalent load resistance functions are obtained from the quasi-static analysis and adjusted for high strain rate. A generalized solution methodology for projectile impact of composite plates and sandwich panels are then proposed based on three key factors: (i) the contact load duration, (ii) the through-thickness transit time, and (iii) the lateral transit time. A two-dimensional wave propagation model is used to determine the ballistic limits of E-glass/polyester panels and GLARE fiber-metal laminates, and predicted values are found to be within 20 and 13% of the experimental results, respectively. A quasi-static impact model is used to predict the ballistic limit for E-glass/epoxy-aluminum honeycomb sandwich impacted by hemispherical nose projectile and the predicted values are within 11% of test results.

No abstract

No abstract

No abstract

No abstract

Analytical models for the static and low-velocity perforation of composite sandwich panel with woven E-glass/epoxy prepreg facesheets and aluminum honeycomb core are developed. The analytical models are based on a set of experimental results. A three-stage perforation process involving consecutive failures of top facesheet, core, and bottom facesheet is proposed. The analytical predictions of static failure loads and deformation are within 10 and 8% of the test data, respectively. The predicted ballistic limit is within 10% of the test data, while the total energy dissipated at the ballistic limit is within 18% of the test results.

No abstract