An analysis of multichannel seismic reflection data was conducted focusing on the comparison between the Messinian Salinity Crisis (MSC) and Plio-Quaternary (PQ) evolution of the eastern Sardo-Provençal and northern AlgeroBalearic basins and related margins in the West Mediterranean Sea. Both basins were completely opened during the MSC and their well-defined seismic stratigraphy is very similar in the deep parts. The primary difference between these two basins is due to their different pre-MSC extensional history, including the opening age and the stretching factors. These factors influenced the occurrence of post-MSC salt tectonics on these margins.
In recent years, new approaches for developing earthquake rupture forecasts (ERFs) have been proposed to be used as an input for probabilistic seismic hazard assessment (PSHA). Zone- based approaches with seismicity rates derived from earthquake catalogs are commonly used in many countries as the standard for national seismic hazard models. In Italy, a single zone- based ERF is currently the basis for the official seismic hazard model. In this contribution, we present eleven new ERFs, including five zone-based, two smoothed seismicity-based, two fault- based, and two geodetic-based, used for a new PSH model in Italy. The ERFs were tested against observed seismicity and were subject to an elicitation procedure by a panel of PSHA experts to verify the scientific robustness and consistency of the forecasts with respect to the observations. Tests and elicitation were finalized to weight the ERFs. The results show a good response to the new inputs to observed seismicity in the last few centuries. The entire approach was a first attempt to build a community-based set of ERFs for an Italian PSHA model. The project involved a large number of seismic hazard practitioners, with their knowledge and experience, and the development of different models to capture and explore a large range of epistemic uncertainties in building ERFs, and represents an important step forward for the new national seismic hazard model.
The Western Mediterranean basin has been formed by Miocene back-arc extension and is underlain by a thin and young lithosphere. This young lithosphere is warm, as testified by an overall elevated offshore heat flow. Heat flow within the Western Mediterranean is, however, highly variable and existing data are unevenly distributed and poorly studied in the central part of the Liguro-Provençal and Algero-Balearic basins. This central part is floored by a young oceanic crust, bordered by different continental margins, cut by transform faults, and filled by up to 8 km of sediments. We present a total of 148 new heat flow data collected during the MedSalt and WestMedFlux cruises in 2015 and 2016 and aligned along seven regional profiles that show an important heat flow variability on the basin-scale, but also locally on the margins. A new heat flow map for the Western Mediterranean outlines the following regional features: (1) a higher average heat flow in the Algero-Balearic basin compared to the Liguro-Provençal basin (94 ± 13 mW/m² and 78 ±16 mW/m², respectively), and (2) a regional thermal asymmetry in both basins, but with opposed heat flow trends. Up to twenty percent of this heat flow difference can be explained by sediment blanketing, but age and heterogeneity of ocean crust due to an asymmetric and polyphased opening of the basins are believed to have given the major thermal imprint. Estimates of the age of the oceanic crust based on the new heat flow suggest a considerably younger West Algerian basin (16-23 Ma) compared to the East Algerian basin and the West Sardinia oceanic floor (31-37 Ma). On the margins and ocean-continent transitions of the Western Mediterranean the new heat flow data point out the existence of two types of local anomalies (length scale 5-30 km): (1) locally increased heat flow up to 153 mW/m² on the Gulf of Lion margin results from thermal refraction of large salt diapirs, and (2) the co-existing of both low (< 50 mW/m²) and high (> 110 mW/m²) heat flow areas on the South Balearic margin suggests a heat redistribution system. We suspect the lateral
The estimation of the Q factor of rocks by seismic surveys is a powerful tool for reservoir characterization, as it helps detecting possible fractures and saturating fluids. Seismic tomography allows building 3D macro-models for the Q factor, using methods as the spectral ratio and the frequency shift. Both these algorithms require windowing the seismic signal accurately in the time domain; however, this process can hardly follow the continuous variations of the wavelet length as a function of offset and propagation effects, and it is biased by the interpreter choice. In this paper, we highlight some drawback of signal windowing in the frequency-shift method, and introduce a tomographic approach to estimate the Q factor using the complex attributes of the seismic trace. We show that such approach is particularly needed when the dispersion is broadening the waveforms of signals with a long wave-path. Our method still requires an interpretative event picking, but no other parameters as the time window length and its possible smoothing options. We validate the new method with synthetic and real data examples, involving the joint tomographic inversion of direct and reflected signals. We show that a calibration of the frequency-shift method is needed to improve the estimation of the absolute Q factor, otherwise only relative contrasts are obtained.
Seismic surveys allow estimating lithological parameters, as P-wave velocity and anelastic absorption, which can detect the presence of fracture and fluids in the geological formations. Recently, a new method has been proposed for high-resolution imaging of anelastic absorption, which combines a macro-model from seismic tomography with a micro-model obtained by the pre-stack depth migration of a seismic attribute, i.e., the instantaneous frequency. As a result, we can get a broadband image that provides clues about the presence of saturating fluids. When the saturation changes sharply, as for gas reservoirs with an impermeable caprock, the acoustic impedance contrast produces “bright spots” because of the resulting high reflectivity at its top. When the fluid content changes smoothly, the anelastic absorption becomes a good detector, as fluid-filled formations absorb more seismic energy than hard rocks. We apply this method for imaging the anelastic absorption in a regional seismic survey acquired by OGS in the Gulf of Trieste (northern Adriatic Sea, Italy).
Permafrost in the NE European Russian Arctic is suffering from some of the highest degradation rates in the world. The rising mean annual air temperature causes warming permafrost, the increase in the active layer thickness (ALT), and the reduction of the permafrost extent. These phenomena represent a serious risk for infrastructures and human activities. ALT characterization is important to estimate the degree of permafrost degradation. We used a multidisciplinary approach to investigate the ALT distribution in the Khanovey railway station area (close to Vorkuta, Arctic Russia), where thaw subsidence leads to railroad vertical deformations up to 2.5 cm/year. Geocryological surveys, including vegetation analysis and underground temperature measurements, together with the faster and less invasive electrical resistivity tomography (ERT) geophysical method, were used to investigate the frozen/unfrozen ground settings between the railroad and the Vorkuta River. Borehole stratigraphy and landscape microzonation indicated a massive prevalence of clay and silty clay sediments at shallow depths in this area. The complex refractive index method (CRIM) was used to integrate and quantitatively validate the results. The data analysis showed landscape heterogeneity and maximum ALT and permafrost thickness values of about 7 and 50 m, respectively. The active layer was characterized by resistivity values ranging from about 30 to 100 Ωm, whereas the underlying permafrost resistivity exceeded 200 Ωm, up to a maximum of about 10 kΩm. In the active layer, there was a coexistence of frozen and unfrozen unconsolidated sediments, where the ice content estimated using the CRIM ranged from about 0.3 – 0.4 to 0.9. Moreover, the transition zone between the active layer base and the permafrost table, whose resistivity values ranged from 100 to 200 Ωm for this kind of sediments, showed ice contents ranging from 0.9 to 1.0. Taliks were present in some depressions of the study area, characterized by minimum resistivity values lower than 10 Ωm. This thermokarst activity was more active close to the railroad because of the absence of insulating vegetation. This study contributes to better understanding of the spatial variability of cryological conditions, and the result is helpful in addressing engineering solutions for the stability of the railway.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.