No abstract

No abstract

No abstract

Active fiber composite (AFC) composed of lead zirconate titanate (PZT) fibers with interdigitated electrodes (IDEs) has been integrated into orthotropic glass fiber reinforced plastic (GFRP) laminates to characterize the performance of AFC as a smart material component in laminated materials. Monotonic cyclic tensile loading was performed on integrated specimens at different strain levels. The AFC output was monitored to determine the effect of applied strain level on the AFC performance. It was found that the AFC sensitivity degraded beyond strains of 0.20% and approached a minimum at 0.50% strain. The degradation in the AFC performance appears to be attributed to the dominating effect of PZT fiber fragmentation during testing, as opposed to depolarization. Acoustic emission (AE) monitoring was used to detect damage in laminates during testing and was correlated with crack evidence from microscopy observations during testing to characterize damage evolution in response to strain levels.

A systematic investigation of the dispersion of carbon nanotubes (CNTs), 1-6 nm in diameter and a few microns in length, in a bisphenol F-based epoxy resin has been presented. Several dispersing techniques including high-speed dissolver, ultrasonic bath/horn, 3-roll mill, etc. have been employed. Optical microscopy has been extensively used to systematically characterise the state of CNT dispersion in the epoxy resin during the entire processing cycle from mixing CNT with resin to adding and curing with hardener. Complimentary viscosity measurements were also performed at various stages of nanocomposite processing. A method to produce a good CNT dispersion in resin was established, but the state of CNT dispersion was found to be extremely sensitive to its physical and chemical environments. The cured nanocomposites were further tested for their thermo-mechanical properties by dynamic mechanical thermal analysis (DMTA), and for flexural and compressive mechanical properties. The measured properties of various nanocomposite plates were then discussed in view of the corresponding CNT dispersion.