A mind-set change is needed to be able to face, and fully assess, the advantages and disadvantages of switching from batch to continuous mode production.
Development of orodispersible minitablets (ODMTs) requires consideration of aspects related to small dimensions, while ensuring short disintegration time with sufficient mechanical stability. In order to meet these and other critical quality attributes (CQAs), quality by design is encouraged. According to this approach, formulation and compression process factors were systematically studied using design of experiments (Plackett-Burman for screening purposes, full and fractional factorial design for in-depth characterization) to understand their influence on CQAs of orodispersible minitablets containing melatonin. Mathematical models describing the relationships between processing variables and attributes such as resistance to crushing and disintegration time were successfully developed, characterized by high coefficients of determination (R2adj = 0.90–0.97) and prediction errors in the range (+2.4 to −10.8%). In conclusion, based on these models, the design space was created for melatonin ODMTs, ensuring the product’s quality and process robustness. Moreover, the study demonstrated the suitability of texture analysis as an alternative to compendial measurement methods of resistance to crushing and disintegration time.
The correct design of blend transfer over single unit processes is an important issue and should be investigated during the development phase since it may influence the final product CQAs. The manual scooping method, although simplistic, can be a temporary solution to improve the results of API's content and uniformity when compared to industrial gravitational transfer.
The aim of this study was to optimize the process of tablets compression and identification of film-coating critical process parameters (CPPs) affecting critical quality attributes (CQAs) using quality by design (QbD) approach. Design of experiment (DOE) and regression methods were employed to investigate hardness, disintegration time, and thickness of uncoated tablets depending on slugging and tableting compression force (CPPs). Plackett-Burman experimental design was applied to identify critical coating process parameters among selected ones that is: drying and preheating time, atomization air pressure, spray rate, air volume, inlet air temperature, and drum pressure that may influence the hardness and disintegration time of coated tablets. As a result of the research, design space was established to facilitate an in-depth understanding of existing relationship between CPPs and CQAs of intermediate product (uncoated tablets). Screening revealed that spray rate and inlet air temperature are two most important factors that affect the hardness of coated tablets. Simultaneously, none of the tested coating factors have influence on disintegration time. The observation was confirmed by conducting film coating of pilot size batches.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.