Pollutants from combustion in wood‐burning stoves are influenced by many factors, including the exhaust gas system. This is responsible for the air supply due to the draught generated. Contrary to results reported in literature the experiments in this study show no effect on temperature related to increasing air supply and a total dust decreasing at higher draughts. The results also show no significant impact of the draught on gaseous emissions (CO/OGC/NOx). The most significant loss was determined at thermal efficiency, which lost up to 13 % absolute with increasing draught.
One of the main objectives of combustion research in field of gas turbine application during the last decades was and still is the reduction of pollutant emissions. The most promising technology to reduce these pollutants turned out to be Lean Premixed (LP) and Lean Premixed Pre-Vaporized (LPP) combustion. However, serious problems concerning combustion-driven instabilities occurred with the implementation of the LP/LPP-concept. Today, prediction and systematic suppression of self-sustained combustion instabilities is an issue still unsolved, due to incomplete understanding of the physical feedback mechanism and the lack of models for dynamic flame response, i.e. frequency dependent characteristics of LP/LPP swirl flames. In that context, the purpose of the current paper is the establishment of a physical model to describe frequency dependent flame dynamics concerning burning velocity of steady-state premixed flames. Derived from that basic understanding, scaling laws for the prediction of unstable operation conditions will be established in dependence on main operation parameters such as thermal load, mixture temperature, air equivalence ratio and especially of fuel and operating pressure. Therefore, a new swirl-burner has been designed, offering the feasibility to choose the type of fuel, to adjust the swirl number for main and pilot burner and the burner exit geometry steplessly and to vary preheating temperatures, air equivalence ratios and thermal loads in a range of industrial relevance for gas turbine applications. To establish a periodical modulation of the mixture mass flow of the main L(P)P flame at the burner outlet sinusoidally in-time with well-defined frequencies and amplitudes, a pulsating unit was used. Using a mixing/ pre-vaporizing unit to create a time-independent and spatial homogeneous mixture of natural gas/ kerosene vapor and combustion air at the burner outlet, flame transfer functions of LP- and LPP swirl flames depending on main operating parameters were determined. The discussed results then lead to stability map for a given combustion system depending on the main operation parameters based on the knowledge of only one fully-described parameter combination leading to an instable condition. Based on this scaling procedure and confirmed by further experimental work the prediction of stability limits depending especially on the type of fuel, the swirl number and the operating pressure will be possible.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.