We have developed a method to invert time-domain airborne electromagnetic (AEM) data using a parametric level-set approach combined with a conventional voxel-based technique to form a parametric hybrid inversion. The approach was designed for situations in which a voxel-based inversion alone may struggle. Such an example is where a distinct anomaly is present with sharp boundaries, and there is a large contrast between a low-resistivity target and a high-resistivity background. The first step of the proposed hybrid method used our novel parametric inversion to recover a best-fitting skewed Gaussian ellipsoid that represented the target of interest. Subsequently, the parametric result was set as an initial and reference model for the second stage, where smooth features with smaller resistivity contrasts were introduced into the model through a conventional voxel-based approach. The approach was tested with synthetic and field data. In the synthetic case, we recovered the size and dip of a conductive, thin, dipping plate with better accuracy compared with a voxel-based inversion. In the field example, we inverted AEM data over the Caber volcanogenic massive sulfide deposit. Based on information from past drilling, our results improve upon previous parametric plate inversions of the deposit itself, while additionally imaging the conductive cover over the deposit. These findings showcased how our parametric hybrid method can improve the accuracy of time-domain AEM inversions for thin dipping targets with large resistivity contrasts compared with the background. Preliminary results presented at SEG 2014 in a talk entitled: "Recovering a thin dipping conductor with 3D electromagnetic inversion over the Caber deposit." Manuscript

The increasing complexity and acuity of the patient population at a southwest United States medical center was a catalyst in updating, revising, and distributing a current extravasation guideline document to caregivers. The guidelines provide information on initial treatment for nurses and the process for documentation and tracking of extravasations. The authors describe how a synthesis of the Nursing and Pharmacy partnership at Banner Good Samaritan Medical Center resulted in the creation of current extravasation guidelines for the facility.

Major mineral discoveries have declined in recent decades, and the natural resource industry is in the process of adapting and incorporating novel technologies such as machine learning and artificial intelligence to help guide the next generation of exploration. One such development is an artificial intelligence architecture called VNet that uses deep learning and convolutional neural networks. This method is designed specifically for use with geoscience data and is suitable for a multitude of exploration applications. One such application is mineral prospectivity in which the machine is tasked with identifying the complex pattern between many layers of geoscience data and a particular commodity of interest, such as gold. The VNet algorithm is designed to recognize patterns at different spatial scales, which lends itself well to the mineral prospectivity problem of there often being local and regional trends that affect where mineralization occurs. We test this approach on an orogenic gold greenstone belt setting in the Canadian Arctic where the algorithm uses gold values from sparse drill holes for training purposes to predict gold mineralization elsewhere in the region. The prospectivity results highlight new target areas, and one such target was followed up with a direct-current induced polarization survey. A chargeability anomaly was discovered wherein the VNet had predicted gold mineralization, and subsequent drilling encountered a 6 g/t Au intercept within 10 m of drilling that averaged more than 1.0 g/t Au. Although most of the prospectivity targets generated from VNet were not drill tested, this first intercept helps validate the approach. We believe this method can help maximize the use of existing geoscience data for successful and efficient exploration programs in the future.

We evaluated a method for cooperatively inverting multiple electromagnetic (EM) data sets with bound constraints to produce a consistent 3D resistivity model with improved resolution. Field data from the Antonio gold deposit in Peru and synthetic data were used to demonstrate this technique. We first separately inverted field airborne time-domain EM (AEM), controlledsource audio-frequency magnetotellurics (CSAMT), and direct current resistivity measurements. Each individual inversion recovered a resistor related to gold-hosted silica alteration within a relatively conductive background. The outline of the resistor in each inversion was in reasonable agreement with the mapped extent of known near-surface silica alteration. Variations between resistor recoveries in each 3D inversion model motivated a subsequent cooperative method, in which AEM data were inverted sequentially with a combined CSAMT and DC data set. This cooperative approach was first applied to a synthetic inversion over an Antonio-like simulated resistivity model, and the inversion result was both qualitatively and quantitatively closer to the true synthetic model compared to individual inversions. Using the same cooperative method, field data were inverted to produce a model that defined the target resistor while agreeing with all data sets. To test the benefit of borehole constraints, synthetic boreholes were added to the inversion as upper and lower bounds at locations of existing boreholes. The ensuing cooperative constrained synthetic inversion model had the closest match to the true simulated resistivity distribution. Bound constraints from field boreholes were then calculated by a regression relationship among the total sulfur content, alteration type, and resistivity measurements from rock samples and incorporated into the inversion. The resulting cooperative constrained field inversion model clearly imaged the resistive silica zone, extended the area of interpreted alteration, and also highlighted conductive zones within the resistive region potentially linked to sulfide and gold mineralization.

We focus on the task of finding a 3D conductivity structure for the DO-18 and DO-27 kimberlites, historically known as the Tli Kwi Cho (TKC) kimberlite complex in the Northwest Territories, Canada. Two airborne electromagnetic (EM) surveys are analyzed: a frequency-domain DIGHEM and a time-domain VTEM survey. Airborne time-domain data at TKC are particularly challenging because of the negative values that exist even at the earliest time channels. Heretofore, such data have not been inverted in three dimensions. In our analysis, we start by inverting frequency-domain data and positive VTEM data with a laterally constrained 1D inversion. This is important for assessing the noise levels associated with the data and for estimating the general conductivity structure. The analysis is then extended to a 3D inversion with our most recent optimized and parallelized inversion codes. We first address the issue about whether the conductivity anomaly is due to a shallow flat-lying conductor (associated with the lake bottom) or a vertical conductive pipe; we conclude that it is the latter. Both data sets are then cooperatively inverted to obtain a consistent 3D conductivity model for TKC that can be used for geologic interpretation. The conductivity model is then jointly interpreted with the density and magnetic susceptibility models from a previous paper. The addition of conductivity enriches the interpretation made with the potential fields in characterizing several distinct petrophysical kimberlite units. The final conductivity model also helps better define the lateral extent and upper boundary of the kimberlite pipes. This conductivity model is a crucial component of the follow-up paper in which our colleagues invert the airborne EM data to recover the time-dependent chargeability that further advances our geologic interpretation.