No abstract

An electrospun cardiovascular graft composed of polydioxanone (PDO) and elastin has been designed and fabricated with mechanical properties to more closely match those of native arterial tissue, while remaining conducive to tissue regeneration. PDO was chosen to provide mechanical integrity to the prosthetic, while elastin provides elasticity and bioactivity (to promote regeneration in vitro/in situ). It is the elastic nature of elastin that dominates the low-strain mechanical response of the vessel to blood flow and prevents pulsatile energy from being dissipated as heat. Uniaxial tensile and suture retention tests were performed on the electrospun grafts to demonstrate the similarities of the mechanical properties between the grafts and native vessel. Dynamic compliance measurements produced values that ranged from 1.2 to 5.6%/100 mmHg for a set of three different mean arterial pressures. Results showed the 50:50 ratio to closely mimic the compliance of native femoral artery, while grafts that contained less elastin exceeded the suture retention strength of native vessel. Preliminary cell culture studies showed the elastin-containing grafts to be bioactive as cells migrated through their full thickness within 7 days, but failed to migrate into pure PDO scaffolds. Electrospinning of the PDO and elastin-blended composite into a conduit for use as a small diameter vascular graft has extreme potential and warrants further investigation as it thus far compares favorably to native vessel.

While electrospinning had seen intermittent use in the textile industry from the early twentieth century, it took the explosion of the field of tissue engineering, and its pursuit of biomimetic extracellular matrix (ECM) structures, to create an electrospinning renaissance. Over the past decade, a growing number of researchers in the tissue engineering community have embraced electrospinning as a polymer processing technique that effectively and routinely produces non‐woven structures of nanoscale fibers (sizes of 80 nm to 1.5 µm). These nanofibers are of physiological significance as they closely resemble the structure and size scale of the native ECM (fiber diameters of 50 to 500 nm). Attempts to replicate the many roles of native ECM have led to the electrospinning of a wide array of polymers, both synthetic (poly(glycolic acid), poly(lactic acid), polydioxanone, polycaprolactone, etc.) and natural (collagen, fibrinogen, elastin, etc.) in origin, for a multitude of different tissue applications. With various compositions, fiber dimensions and fiber orientations, the biological, chemical and mechanical properties of the electrospun materials can be tailored. In this review we highlight the role of electrospinning in the engineering of different tissues and applications (skin/wound healing, cartilage, bone, vascular tissue, urological tissues, nerve, and ligament), and discuss its potential role in future work. Copyright © 2007 Society of Chemical Industry

No abstract

The purpose of this study was to enhance the mechanical properties and slow the degradation of an electrospun fibrinogen scaffold, while maintaining the scaffold's high level of bioactivity. Three different cross-linkers were used to achieve this goal: glutaraldehyde vapour, 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride (EDC) in ethanol and genipin in ethanol. Scaffolds with a fibrinogen concentration of 120 mg ml(-1) were electrospun and cross-linked with one of the aforementioned cross-linkers. Mechanical properties were determined through uniaxial tensile testing performed on scaffolds incubated under standard culture conditions for 1 day, 7 days and 14 days. Cross-linked scaffolds were seeded with human foreskin fibroblasts (BJ-GFP-hTERT) and cultured for 7, 14 and 21 days, with histology and scanning electron microscopy performed upon completion of the time course. Mechanical testing revealed significantly increased peak stress and modulus values for the EDC and genipin cross-linked scaffolds, with significantly slowed degradation. However, cross-linking with EDC and genipin was shown to have some negative effect on the bioactivity of the scaffolds as cell migration throughout the thickness of the scaffold was slowed.

Extracellular matrices are arranged with a specific geometry based on tissue type and mechanical stimulus. For blood vessels in the body, preferential alignment of fibers is in the direction of repetitive force. Electrospinning is a controllable process which can result in fiber alignment and randomization depending on the parameters utilized. In this study, arterial grafts composed of polycaprolactone (PCL), polydioxanone (PDO) and silk fibroin in blends of 100:0 and 50:50 for both PCL:silk and PDO:silk were investigated to determine if fibers could be controllably aligned using a mandrel rotational speed ranging from 500 to 8000 revolutions per minute (RPM). Results revealed that large- and small-diameter mandrels produced different degrees of fiber alignment based on a fast Fourier transform of scanning electron microscope images. Uniaxial tensile testing further demonstrated scaffold anisotropy through changes in peak stress, modulus and strain at break at mandrel rotational speeds of 500 and 8000 RPM, causing peak stress and modulus for PCL to increase 5- and 4.5-fold, respectively, as rotational speed increased. Additional mechanical testing was performed on grafts using dynamic compliance, burst strength and longitudinal strength displaying that grafts electrospun at higher rotational rates produced stiffer conduits which had lower compliance and higher burst strength compared to the lower mandrel rotational rate. Scaffold properties were found to depend on several parameters in the electrospinning process: mandrel rotational rate, polymer type, and mandrel size. Vascular scaffold design under anisotropic conditions provided interesting insights and warrants further investigation.

The regulator VicR of the two-component regulatory system VicRK is essential in several Gram-positive bacteria. However, the authors were able to generate an unconditional vicR insertional mutant of group A Streptococcus. This mutant grew well in rich media but not in non-immune human blood and serum, had attenuated virulence, and was unstable in mice. Complementation of the mutant with vicR expressed in trans restored its phenotype to wild-type. A vicK deletion mutant had a phenotype similar to that of the vicR mutant. Phagocytosis and killing of the vicR mutant were normal, suggesting that VicRK does not regulate processes involved in evasion of host defence. Microarray analysis showed that vicR inactivation down-regulated the transcription of 13 genes, including putative cell wall hydrolase gene pcsB and spy1058–1060, which encode a putative phosphotransferase system enzyme II for carbohydrate transport, and upregulated the expression of five genes, including spy0183 and spy0184, which encode an osmoprotectant transporter OpuA. Consistent with microarray analysis, the vicR mutant took up more of the osmoprotectants betaine and proline and was sensitive to osmotic stress, indicating that vicR inactivation induced osmotic stress and increased susceptibility to osmotic pressure. Additionally, a spy1060 deletion mutant also displayed attenuated virulence. These results suggest that VicRK regulates processes involved in cell wall metabolism, nutrient uptake, and osmotic protection.

No abstract