No abstract

Primary zinc-carbon batteries with a coplanar battery architecture were prepared by screen printing. Prior to battery activation by printing of an acidic zinc chloride electrolyte, printed zinc and manganese dioxide electrodes were compacted by calendering. Material densification of the electodes resulted in electrode layer thickness reduction on both sides, modified micropore surface area and volume on the cathode side. Galvanostatic impedance measurements and chronopotentiometry were used to characterise fabricated batteries with the individually prepared electrode configurations. While calendering of both electrodes of the batteries showed adverse effects by an increase of internal resistances and a reduction of discharge capacities, exclusive calendering of the zinc anode increased the active material utilisation by electrochemical cell reaction and thus the discharge efficiency of the battery.

Photocatalysis, belonging to the advanced oxidation processes (AOPs), is a potential new transformation technology for lignin derivatives to value added products (e.g., phenol, benzene, toluene, and xylene). Moreover, lignin represents the only viable source to produce aromatic compounds as fossil fuel alternative. This review covers recent advancement made in the photochemical transformation of industrial lignins. It starts with the photochemical reaction principle followed by results obtained by varying process parameters. In this context, influences of photocatalysts, metal ions, additives, lignin concentration, and illumination intensity and the influence of pH are presented and discussed. Furthermore, an overview is given on several used process analytical methods describing the results obtained from the degradation of lignin derivatives. Finally, a promising concept by coupling photocatalysis with a consecutive biocatalytic process was briefly reviewed.

No abstract

No abstract