Bacterial pathogens are responsible for millions of cases of illnesses and deaths each year throughout the world. The development of novel surfaces and coatings that effectively inhibit and prevent bacterial attachment, proliferation, and growth is one of the crucial steps for tackling this global challenge. Herein, we report a dual-functional coating for aluminum surfaces that relies on the controlled immobilization of lysozyme enzyme (muramidase) into interstitial spaces of presintered, nanostructured thin film based on ∼200 nm silica nanoparticles and the sequential chemisorption of an organofluorosilane to the available interfacial areas. The mean diameter of the resultant lysozyme microdomains was 3.1 ± 2.5 μm with an average spacing of 8.01 ± 6.8 μm, leading to a surface coverage of 15.32%. The coating had an overall root-mean-square (rms) roughness of 539 ± 137 nm and roughness factor of 1.50 ± 0.1, and demonstrated static, advancing, and receding water contact angles of 159.0 ± 1.0°, 155.4 ± 0.6°, and 154.4 ± 0.6°, respectively. Compared to the planar aluminum, the coated surfaces produced a 6.5 ± 0.1 (>99.99997%) and 4.0 ± 0.1 (>99.99%) log-cycle reductions in bacterial surfaces colonization against Gram-negative Salmonella Typhimurium LT2 and Gram-positive Listeria innocua, respectively. We anticipate that the implementation of such a coating strategy on healthcare environments and surfaces and food-contact surfaces can significantly reduce or eliminate potential risks associated with various contamination and cross-contamination scenarios.

Biopesticides have become a global trend in order to minimize the hazards derived from synthetic chemical pesticides and improve the safety, efficacy, and environmental friendliness of agricultural pest management. Herein, we report a novel biopesticide composite encapsulating azadirachtin with the size of 260.9 ± 6.8 nm and its effects on the insect pest Spodoptera frugiperda (fall armyworm). The nanocomposite biopesticide was produced via nano emulsification and freeze-drying process using whey protein isolate as a nanocarrier matrix to encapsulate azadirachtin, a natural insect-killing compound obtained from neem seed. We found that the nanocomposite biopesticide acted quicker and with greater efficacy than bulk azadirachtin treatment with corresponding LC50 values within 11 days of S. frugiperda larvae survival. Through confocal microscopy, we found the enhanced biodistribution of the nanocomposite to all parts of the insect body. Photodegradation assays revealed an enhanced UV stability facilitated by light-scattering stemming from the intrinsic nanostructure and UV scavenging vitamin-E component.

Concerns arising from accidental and occasional releases of novel industrial nanomaterials to the environment and waterbodies are rapidly increasing as the production and utilization levels of nanomaterials increase every day. In particular, two-dimensional nanosheets are one of the most significant emerging classes of nanomaterials used or considered for use in numerous applications and devices. This study deals with the interactions between 2D molybdenum disulfide (MoS2) nanosheets and beneficial soil bacteria. It was found that the log-reduction in the survival of Gram-positive Bacillus cereus was 2.8 (99.83%) and 4.9 (99.9988%) upon exposure to 16.0 mg/mL bulk MoS2 (macroscale) and 2D MoS2 nanosheets (nanoscale), respectively. For the case of Gram-negative Pseudomonas aeruginosa, the log-reduction values in bacterial survival were 1.9 (98.60%) and 5.4 (99.9996%) for the same concentration of bulk MoS2 and MoS2 nanosheets, respectively. Based on these findings, it is important to consider the potential toxicity of MoS2 nanosheets on beneficial soil bacteria responsible for nitrate reduction and nitrogen fixation, soil formation, decomposition of dead and decayed natural materials, and transformation of toxic compounds into nontoxic compounds to adequately assess the environmental impact of 2D nanosheets and nanomaterials.

Lack of maintenance and poor sanitation of food-contact surfaces (FCSs) can result in foodborne microbial contamination and biofilm formation. With increasing industrial concerns over food safety and hygiene, it is important to keep FCSs bacteria-free to protect the consumers from various foodborne illnesses. In the current study, we report the fabrication of highly durable nanodiamond (ND) based coatings on high-density polyethylene (HDPE), combining the chemisorption of low surface energy ligands and rigid nanotexturing. The coated HDPE surfaces resulted in static, advancing, and receding water contact angles of 151.1 ± 0.3°, 155.0 ± 1.0°, and 151.0 ± 1.9°, respectively. This superhydrophobic coating demonstrated excellent mechanical durability, retaining its highly water-repellent nature after surface abrasion with spinach leaves and onion peels, as well as after 50 cycles of sand abrasion. In comparison to bare HDPE, the adhesion of Salmonella typhimurium LT2 and Listeria innocua bacteria onto the coated surfaces was reduced by 2.1 ± 0.43 (>99.34%) and 1.6 ± 0.55 (>97.75%) log-cycles, respectively. In addition, the coated substrates successfully reduced the cross-contamination of spinach leaves by S. typhimurium LT2 and L. innocua. Overall, this study demonstrates the proof-of-concept that durable superhydrophobic coatings involving nanodiamond on HDPE have the potential to reduce bacterial cross-contamination scenarios of FCSs in food processing environments.

Herein, we describe interfacially-assembled [7]helicene films that were deposited on graphene monolayer using the Langmuir-Schaefer deposition by utilizing the interactions of nonplanar (helicene) and planar (graphene) π–π interactions as functional antifouling coatings. Bacterial adhesion of Staphylococcus aureus on helicene—graphene films was noticeably lower than that on bare graphene, up to 96.8% reductions in bacterial adhesion. The promising bacterial antifouling characteristics of helicene films was attributed to the unique molecular geometry of helicene, i.e., nano-helix, which can hinder the nanoscale bacterial docking processes on a surface. We envision that helicene—graphene films may eventually be used as protective coatings against bacterial antifouling on the electronic components of clinical and biomedical devices.