Research on the luminescent solar concentrator (LSC) over the past thirty‐odd years is reviewed. The LSC is a simple device at its heart, employing a polymeric or glass waveguide and luminescent molecules to generate electricity from sunlight when attached to a photovoltaic cell. The LSC has the potential to find extended use in an area traditionally difficult for effective use of regular photovoltaic panels: the built environment. The LSC is a device very flexible in its design, with a variety of possible shapes and colors. The primary challenge faced by the devices is increasing their photon‐to‐electron conversion efficiencies. A number of laboratories are working to improve the efficiency and lifetime of the LSC device, with the ultimate goal of commercializing the devices within a few years. The topics covered here relate to the efforts for reducing losses in these devices. These include studies of novel luminophores, including organic fluorescent dyes, inorganic phosphors, and quantum dots. Ways to limit the surface and internal losses are also discussed, including using organic and inorganic‐based selective mirrors which allow sunlight in but reflect luminophore‐emitted light, plasmonic structures to enhance emissions, novel photovoltaics, alignment of the luminophores to manipulate the path of the emitted light, and patterning of the dye layer to improve emission efficiency. Finally, some possible ‘glimpses of the future’ are offered, with additional research paths that could result in a device that makes solar energy a ubiquitous part of the urban setting, finding use as sound barriers, bus‐stop roofs, awnings, windows, paving, or siding tiles.

(IR), here defined as light with wavelengths between 700 nm and 2500 nm, accounts for around 50% of the total energy emitted by the sun reaching Earth (Figure 1b), [3,4] and this light produces interior heating but is invisible to the unaided eye.The absorption of sunlight by building materials and passage of IR through transparent surfaces such as windows is responsible for much of the interior overheating of office rooms, automobile interiors, greenhouses, and other similar spaces. The use of artificial cooling and heating systems will only increase with the continued influence of global climate change, with energy used for cooling systems surpassing energy used for heating around the year 2070, and a 40 fold increase in air cooling energy use is expected by 2100. [5] By controlling the influx of radiant heat transfer, calculations show that more than 50% of the energy used in lighting, heating and cooling could be saved by deploying better control systems over only 18% of available window stock. [6] In areas with human inhabitants employing windows, more aspects must be considered than simply reducing the use of energy in the room: any switchable window used in, for example, a commercial office space has several other requirements that must be met before it may be installed. Among these requirement are reasonably fast switching speeds [7] (although for IR control, relatively longer times compared to visible light switching should be acceptable), good optical transparency with minimum haze, an acceptable device lifetime, [8] and functionality over a range of exterior temperatures. Controlling the excess of solar energy without compromising the visible transparency of the window is an important consideration for human health: maintaining inside/outside contact and daylighting are vital in retaining well-being and productivity, as well as providing economic and aesthetic gain by reducing the need for artificial lighting systems. [9,10] These are challenging goals for a window to realize.A number of materials have been developed over the past few decades to maintain indoor temperatures. Many of these focus on the opaque structural building elements like walls and roofing. [10][11][12][13] Other solutions target the transparent window, employing external mechanical shutters and blinds, [14] phase change materials (PCMs), [15] thermochromic materials, [16] aerogels, [17] trapped gas in fluid membranes, [18] and even phononic materials, [19] among other options. Indeed, controlling heat passage through the window in response to changing climate conditions is a great challenge; ideally, one would accomplish Windows are vital elements in the built environment that have a large impact on the energy consumption in indoor spaces, affecting heating and cooling and artificial lighting requirements. Moreover, they play an important role in sustaining human health and well-being. In this review, we discuss the next generation of smart windows based on organic materials which can change their properties by reflecting or trans...

A new type of “smart” window is proposed that makes use of fluorescent dye guests in a liquid‐crystal host sandwiched between glass panels. The dye absorbs a variable amount of light depending on its orientation, and re‐emits this light, of which a significant fraction is trapped by total internal reflection at the glass–air interface, and becomes concentrated along the edges. Such a device could both generate electricity via an attached photovoltaic as well as allow user control of the amount of transmitted light. By applying a voltage across the cell, absorption could be varied 31%, while the usable light output only varied 11% due to the increased efficiency of light collection at homeotropic dye orientation.

We report conversion efficiencies of experimental single and dual light guide luminescent solar concentrators. We have built several 5 cm × 5 cm and 10× cm × 10 cm luminescent solar concentrator (LSC) demonstrators consisting of c-Si photovoltaic cells attached to luminescent light guides of Lumogen F Red 305 dye and perylene perinone dye. The highest overall efficiency obtained was 4.2% on a 5 cm × 5 cm stacked dual light guide using both luminescent materials. To our knowledge, this is the highest reported experimentally determined efficiency for c-Si photovoltaic-based LSCs. Furthermore, we also produced a 5 cm × 5 cm LSC specimen based on an inorganic phosphor layer with an overall efficiency of 2.5%.

No abstract