aIn this study, the mechanical properties and non-isothermal degradation kinetics of polypropylene (PP), high-density polyethylene (HDPE) with dilauroyl peroxide and their blends in different mixture ratios were investigated. The effects of adding dilauroyl peroxide (0-0.20 wt%) on the mechanical and thermal properties of PP + HDPE blends have been studied. On the other hand, the kinetics of the thermal degradation and thermal oxidative degradation of PP + HDPE (80/20 wt%) blends were studied in different atmospheres, to analyze their thermal stability. The kinetic and thermodynamic parameters such as the activation energy, E a , the pre-exponential factor, A, the reaction order, n, the entropy change, the enthalpy change, and the free energies of activated complex related to PP, HDPE, and blend systems were calculated by means of the several methods on the basis of the single heating rate. A computer program was developed for automatically processing the data to estimate the reaction parameters by using different models. Most appropriate method was determined for each decomposition step according to the least-squares linear regression.
In this study, the influence of dilauroyl peroxide on mechanical and thermal properties of different polypropylene (PP) matrices was investigated. Polypropylene matrices, different molecular weight isotactic PP containing 0.01, 0.02, 0.04, 0.06, 0.08, and 0.1 wt% of dilauroyl peroxide (DLP) were prepared by using a single-screw extruder. The effect of the visbreaking agent (DLP) on mechanical, physical, thermal and morphological properties of different molecular weight PP had been studied. Mechanical properties (tensile strength at break point, at yield and elongation at break point), melt flow index (MFI), scanning electron microscope (SEM) and differential scanning calorimetric (DSC) analyses of these matrices were examined. Melting (T m ) and crystallization (T c ) temperatures, crystallinity ratio (%) and enthalpies were determined. The microstructure of isotactic polypropylene matrix was investigated by scanning electron microscopy (SEM). From SEM analysis, it was observed that the surface disorder increased by the increasing amount of DLP. As a result of DSC analyses, the crystallinity ratio of the PP matrices has varied between 1.64-7.27%. Mechanical properties of the matrices have been improved. Particularly, the mechanical tests of PP have given interesting results when compounded with 0.06-0.08 wt% dilauroyl peroxide (DLP). Mechanical properties and thermal decomposition processes were all changed by increasing the amount of DLP in the matrix structure.
In this study, high alloyed steel bars with a diameter of 12.30 mm made up of 1.4871 (X53CrMnNiN219) and 1.4718 (X45CrSi93) steels were used as experimental material for friction welding. Metallographic and X-ray diffraction investigations as well as microprobe sampling were performed on the samples. Mechanical orientation of particles caused by plastic deformation and carbide scattering has been observed. The diffusion behaviour has been investigated for the elements Cr, Ni, Mn, and Si, respectively. The existence of (Cr,Fe)7C3 carbides in the welding region was also observed.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.