Single laboratory validation of a method for arsenic speciation analysis in seafood and seaweed is presented. The method is based on stepwise extraction of water-soluble and non-polar arsenic with hot water and a mixture of dichloromethane and methanol, respectively. While the water-soluble arsenicals were speciated by anion and cation exchange liquid chromatography inductively coupled plasma mass spectrometry (LC-ICP-MS), the non-polar arsenicals were collectively determined by ICP-MS after digestion in acid. The performance characteristics and broad application of the method were evaluated by analyzing eight commercial samples (cod, haddock, mackerel, crab, shrimp, geoduck clam, oyster, and kombu) and four reference materials (fish protein (DORM-4), lobster hepatopancreas (TORT-3), mussel tissue (SRM 2976), and hijiki seaweed (CRM 7405-a)) representing finfish, crustaceans, molluscs, and seaweed. Matrices spiked at three levels in duplicates were also analyzed. The stepwise extraction provided 76-106% extraction of the total arsenic from the test materials. The method demonstrated satisfactory repeatability for analysis of replicate extracts prepared over several days. The accuracy of the method was evaluated by analyzing reference materials certified for both total arsenic and a few arsenicals; the experimental results were 90-105% of the certified values. Comparison between the total water-soluble arsenic and the sum of the concentrations of the chromatographed species gave 80-92% mass balance. While spike recoveries of most arsenicals were in the acceptance range set by CODEX, a few species spiked into cod, haddock, and shrimp were poorly recovered due to transformation to other forms. After thorough investigations, strategies were devised to improve the recoveries of these species by averting their transformations. Limits of quantification (LOQ) for the extraction and quantification of 16 arsenicals using the current method were in the range 6-16 ng g arsenic.
The study focused on the determination of arsenic species in the top ten most consumed seafoods in the United States. Fifty-four samples were collected from local supermarkets, and their species identities were confirmed by DNA barcoding. The total arsenic in the samples varied greatly in the range of 8−22200 ng/g (wet mass). Speciation analysis based on extraction of water-soluble and nonpolar arsenic showed that inorganic arsenic (iAs) was found only in clams and crabs, while arsenobetaine (AsB) predominates in most samples. Among the other arsenicals, trimethylarsoniopropionate (TMAP) was found in most matrices with higher concentrations in crabs, and arsenosugars existed in most clams and crabs. Nonpolar arsenic accounted for 1−46% of the total arsenic in the samples. The accuracy of the analytical results was evaluated using standard reference materials and spike recovery tests. The survey showed that the iAs concentrations in America's most consumed seafood products are much lower than the tolerable intake set by the Joint FAO/WHO Expert Committee, even at the highest levels found in this study.
Several extraction and chromatographic methods were evaluated to identify optimum conditions for arsenic speciation analysis in seafood and seaweed. The extraction systems, which include aqueous, aqueous-organic, acidic, basic, and enzymatic solutions, were examined for their efficiency in extracting arsenic from finfish, crustaceans, molluscs, and seaweed keeping the chemical forms of the native arsenicals intact. While dilute solutions of nitric acid, hydrochloric acid, and tetramethylammonium hydroxide (TMAH) extract high fractions of arsenic from most of the matrices, the extractants oxidized arsenite (As) to arsenate (As) and converted some arsenosugars and non-polar arsenicals to known and/or unknown forms. Hot water (90 °C) effectively maintained the integrity of the native arsenic species and enabled analysis of the extracts with no further manipulation than filtration and dilution. Stepwise extraction of water-soluble and non-polar arsenic with hot water and a mixture of dichloromethane and methanol, respectively, resulted in sufficiently quantitative (> 75%) arsenic extraction from seafood and seaweed. Anion and cation exchange chromatographic methods were optimized for separation and quantitation of the arsenicals extracted into hot water. The non-polar arsenicals were collectively determined after digesting the extract in acid. The application of the optimum extraction and chromatographic conditions was demonstrated by analyzing certified reference materials of tuna fish tissue (BCR 627), lobster hepatopancreas (TORT-2) and oyster tissue (SRM 1566b), and a sample of hijiki seaweed. For all the matrices, good agreement (80-92%) was found between the total water-soluble arsenic and the sum of the concentrations of the chromatographed species. Limits of quantification (LOQ) were in the range 4-11 ng g for 16 arsenicals.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.