First principle modeling of the lower hybrid (LH) current drive in tokamak plasmas is a longstanding activity, which is gradually gaining in accuracy thanks to quantitative comparisons with experimental observations. The ability to reproduce simulatenously the plasma current and the non-thermal bremsstrahlung radial profiles in the hard x-ray (HXR) photon energy range represents in this context a significant achievement. Though subject to limitations, ray tracing calculations are commonly used for describing wave propagation in conjunction with Fokker-Planck codes, as it can capture prominent features of the LH wave dynamics in a tokamak plasma-like toroidal refraction. This tool has been validated on several machines when the full absorption of the LH wave requires the transfer of a small fraction of power from the main lobes of the launched power spectrum to a tail at a higher parallel refractive index. Conversely, standard modeling based on toroidal refraction only becomes more challenging when the spectral gap is large, except if other physical mechanisms may dominate to bridge it, like parametric instabilities, as suggested for JET LH discharges (Cesario et al 2004 Phys. Rev. Lett. 92 175002), or fast fluctuations of the launched power spectrum or 'tail' LH model, as shown for Tore Supra (Decker et al 2014 Phys. Plasma 21 092504). The applicability of the heuristic 'tail' LH model is investigated for a broader range of plasma parameters as compared to the Tore Supra study and with different LH wave characteristics. Discrepancies and agreements between simulations and experiments depending upon the different models used are discussed. The existence of a 'tail' in the launched power spectrum significantly improves the agreement between modeling and experiments in plasma conditions for which the spectral gap is large in EAST and Alcator C-Mod tokamaks. For the Alcator C-Mod tokamak, the experimental evolution of the HXR profiles with density suggests that this model is valid up to a line-averaged density of × + n 1.0 10 e 20 m −3 , a statement that is confirmed by simulations of the HXR scaling law with density. While simulations with GENRAY/CQL3D codes have ascribed the fast decrease of the HXR emission with density to parasitic absorption in the scrape-off layer by collisional damping, an alternative interpretetation based on an enhanced refraction as the LH wave propagates in the vicinity of the X-point is provided by C3PO/LUKE codes. The consequences for the predictions of LH current in ITER are discussed.
The perturbation of the lower hybrid wave (LH) power spectrum by fluctuations of the plasma in the vicinity of the antenna is investigated by solving the full wave equation in a slab geometry using COMSOL Multiphysics®. The numerical model whose generality allows to study the effect of various types of fluctuations, including those with short characteristic wavelengths is validated against a coupling code in quiescent regimes. When electron density fluctuations along the toroidal direction are incorporated in the dielectric tensor over a thin perturbed layer in front of the grill, the power spectrum may be strongly modified from the antenna mouth to the plasma separatrix as the LH wave propagates. The diffraction effect by density fluctuations leads to the appearance of multiple satellite lobes with randomly varying positions and the averaged perturbation is found to be maximum for the Fourier components of the fluctuating spectrum in the vicinity of the launched LH wavelength. This highlights that fast toroidal inhomogeneities with short characteristics length scales in front of the grill may change significantly the initial LH power spectrum used in coupled ray-tracing and Fokker-Planck calculations.
Abstract-This article basically deals with the implementation of a negligible resistance varactor with a wide capacitance value into a modified version of a cedar shape antenna [1]. The electromagnetic characteristics of the antenna are manipulated both at the level of fractal geometry and electrical length using diodes. The antenna achieves tunability in a wide frequency range as a quad band antenna operating between 1.45 GHz and 4.6 GHz when 3 pairs of varactors are connected across slots. Pin diodes are also implemented leading to tunability in triple frequency bands between 3.7 GHz and 5.8 GHz. Moreover, implementing pin diodes as switches allows frequency reconfigurability of a dual band between 2.5 and 4 GHz and a single band of 6.6 GHz. The antenna RF frequencies have many applications in wireless communication that cover GPS, Bluetooth, WIFI, WIMAX, and WLAN.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.