Kebutuhan akan alat transportasi yang efektif, efisien, dan aman menjadi sangat mutlak diperlukan oleh konsumen. Kapal laut merupakan salah satu jenis transoprtasi laut yang sering digunakan oleh masyarakat untuk melakukan kegiatan perjalanan dan bepergian. Kabupaten Buru adalah salah satu kabupaten pada Provinsi Maluku yang letak pulaunya berbeda dengan kota Ambon yakni ± 161,4 km. Untuk dapat menghubungkan kedua pulau tersebut, hanya dapat ditempuh dengan transportasi laut dan udara. Terdapat 3 alat transportasi laut yang dapat digunakan oleh konsumen yakni (a) Kapal Laut (Kapal Besar/kapal Putih) contohnya ( KMP Sangiang, KMP Dororonda), (b) Kapal Angkutan milik PT ASDP Indonesia, yakni Kapal Ferry, dan (c) Kapal Cepat (kapal berukuran kecil & cepat). Tujuan dari penelitian ini agar dapat memberikan gambaran dan rekomendasi kepada masyarakat dalam melakukan pengambilan keputusan untuk memilih alat transportasi yang digunakan. Berdasarkan hasil penelitian dan analisa data dengan menggunakan metode dan perhitungan AHP maka diperoleh nilai pembobotan tertinggi atau prioritas adalah Kapal Pelni sebesar 36%, Kapal Ferry ASDP dengan bobot 33% dan Kapal Cepat dengan bobot 31%. Adapun kriteria dalam memeprtimbangkan adalah kriteria jumlah armada, harga, waktu tempuh, keamanan, pelayanan dan perfroma.
PendahuluanIndustri Garment adalah salah satu industri yang bergerak dibidang sandang yang setiap tahunnya senantiasa mengalami perkembangan demi memenuhi kebutuhan masyarakat.Alasan utama masyarakat menggunakan sandang, bukan lagi sebagai kebutuhan untuk menutupi atau melindungi tubuh, namun faktor lain seperti pemuas seni dan mode menjadikan industri garment merupakan salah satu sektor yang sangat penting.Pekerjaan pada industri garment umummnya adalah mengenai proses material handling, posisi kerja duduk seperti membungkuk dan melakukan pekerjaan berulang-ulang dengan postur kerja yang sama yang dapat mengakibatkan cidera atau kecelakaan akibat kerja dan berdiri dengan waktu yang lama, tingkat pengulangan kerja, interaksi dengan benda tajam seperti jarum, gunting, dan pisau potong. Hal ini tentunya akan berdampak kepada produktivitas operator yang dapat menurun.Secara ideal, rancangan sebuah workstation haruslah memperhatikan beberapa aspek-aspek yang diantaranya adalah mengenai antropologi fisik, pengaturan ruang kerja, pengukuran waktu kerja, studi metode kerja, faal kerja & Biomekanika, keselamatan & kesehatan kerja, dan maintainbility [1].UD Aliya adalah merupakan salah satu perusahaan yang bergerak di bidang garment yang berlokasi di daerah Dieng, Malang. Perusa haan yang berdiri semenjak tahun 1999 ini * Corresponding author. Email : mentarirasyid03@gmail.com Published online at http://Jemis.ub.ac.id Copyright ©2016 JTI UB Publishing. All Rights Reserved menjadikan kualitas dan waktu (proses penyelesaian produk) sebagai faktor untuk meningkatkan porduktivitas, keuntungan dan tentu kepercayaan dari konsumen.Adapun produk yang dihasilkan oleh UD Aliya, adalah kemeja, jersey, sajadah, dan lain sebagainya yang terkadang juga disesuaikan dengan permintaan pelanggan. Namun bukan hanya menghasilkan produk, UD Aliya juga melayani jasa pembordiran jika ada permintaan dari konsumen.Terdapat empat work station pada proses produksi di UD Aliya, mulai dari tahapan persipaan hingga tahap penyelesaian. Adapun aktivitas yang dilakukan pada setiap work station, yang dapat dilihat pada Tabel 1.Untuk workstation I (persiapan) memiliki tiga orang operator dengan masingmasing operator memiliki tugas memotong, memeriksa bahan baku, dan menyiapkan film (pola) yang akan dibuat. Apabila ada pesanan datang dari konsumen, maka pola yang diinginkan akan disesuaikan dengan pihak perusahaan. Kemudian untuk workstation II (Pembordiran) terdiri atas sembilan operator dimana tiga diantaranya merupakan pengendali pada proses pembordiran, dan sisanya melakukan proses pembidangan maupun pemasangan benang. Workstation III (penjahitan) terdiri atas 13 orang operator. Meskipun UD Aliya memiliki 50 buah mesin jahit, namun pada kenyataannya hanya 15 mesin saja yang sering dioperasikan. Untuk workstation IV (Penyelesaian) terdiri atas 10 orang operator dengan tugas memotong / membersihkan sisa benang maupun kanvas pada produk jadi / setengah jadi.Berdasarkan pada hasil pengamatan
Penerapan teknologi informasi di Perguruan Tinggi pada prinsipnya untuk memudahkan berlangsungnya proses kerja baik dosen, mahasiswa, maupun pegawai administrasi dalam hal pengaksesan data dan informasi. Kecanggihan teknologi yang memicu akademik untuk memberikan layanan informasi dengan menggunakan internet atau yang sudah berbasis web. Hampir setiap akademik secara umum menggunakan komputer sebagai pengolah data dengan menggunakan aplikasi Excel dan kondisi kerja bagian ini masih menggunakan suatu sistem manual dengan mencatat data pada kertas dan di salin pada program office standard tentunya dalam penyimpanan data akan membutuhkan basis data yang cukup dalam penyimpanan dan tatap muka aplikasi yang membantu. Tujuan dari penelitian ini agar dapat merancang sebuah kerangka system informasi untuk membantu pengisian KRS mahasiswa. Metode yang digunakan dalam penelitian ini adalah pengembangan system informasi berbasis framework yang dapat membantu memudahkan penggunanya. Adapun tahapan penelitian dalam metode ini adalah (1) mengumpulkan data-data Mahasiswa, Dosen, dan matakuliah, (2) membuat tabel entity (3) membuat tabel activity diagram, activity diagram menggambarkan berbagai alir aktivitas dalam sistem yang sedang dirancang, bagaimana masing-masing alir berawal, decision yang mungkin terjadi, dan bagaimana mereka berakhir (4) Membuat tabel ERD. Hasil penelitian ini menunjukkan bahwa perancangan kerangka sistem informasi akan mempermudah mahasiswa dan stakeholder lainnya dalam pengisian KRS. Pentingnya pengembangan lebih lanjut mengenai implementasi penerapan dengan aplikasi kedepannya diharapkan dapat meningkatkan efektifitas dan efisiensi kinerja seluruh stakeholder.
The construction of a retaining wall must be based on a stability calculation and safety factors because errors that occur can be no good. A retaining wall construction can be said to be safe if it is fulfilled. The purpose of this study was to analyze the stability of cantilever type soil retaining walls against shifting, overturning, and soil bearing strength. overturning, and strongly supporting the soil. The method of collecting and collecting data in the field used the field observation method.Wall stability analysis using analytical Finite Element Method based software assistance. The results of data analysis show that the stability of the wall is safe against shear forces, rolling forces and the carrying capacity of the soil with a Safety Factor value of 4.05, 1.50, and 4.67.While the Out Put results from the application also show that the retaining wall at the Masohi City Landfill is still quite safe with a Safety Factor value of 1.80.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.