The biological effect of sound on microorganisms has been a field of interest for many years, with studies mostly focusing on ultrasonic and infrasonic vibrations. In the audible range (20 Hz to 20 kHz), sound has been shown to both increase colony formation and disrupt microbial growth, depending upon the organism and frequency of sound used. In the brewer’s yeast Saccharomyces cerevisiae, sound has been shown to significantly alter growth, increase alcohol production, and affect the metabolite profile. In this study, S. cerevisiae was exposed to a continuous 90 dB @ 20 μPa tone at different frequencies (0.1 kHz, 10 kHz, and silence). Fermentation characteristics were monitored over a 50-h fermentation in liquid malt extract, with a focus on growth rate and biomass yield. The profile of volatile metabolites at the subsequent stationary phase of the ferment was characterised by headspace gas chromatography–mass spectrometry. Sound treatments resulted in a 23% increase in growth rate compared to that of silence. Subsequent analysis showed significant differences in the volatilomes between all experimental conditions. Specifically, aroma compounds associated with citrus notes were upregulated with the application of sound. Furthermore, there was a pronounced difference in the metabolites produced in high- versus low-frequency sounds. This suggests industrial processes, such as beer brewing, could be modulated by the application of audible sound at specific frequencies during growth.

Increasing consumer demand for natural flavours and fragrances has driven up prices and increased pressure on natural resources. A shift in consumer preference towards more sustainable and economical sources of these natural additives and away from synthetic production has encouraged research into alternative supplies of these valuable compounds. Solid-state fermentation processes support the natural production of secondary metabolites, which represents most flavour and aroma compounds, while agro-industrial by-products are a low-value waste stream with a high potential for adding value. Accordingly, four filamentous fungi species with a history of use in the production of fermented foods and food additives were tested to ferment nine different agro-industrial by-products. Hundreds of volatile compounds were produced and identified using headspace (HS) solid-phase microextraction (SPME) coupled to gas chromatography–mass spectrometry (GC–MS). Four compounds of interest, phenylacetaldehyde, methyl benzoate, 1-octen-3-ol, and phenylethyl alcohol, were extracted and quantified. Preliminary yields were encouraging compared to traditional sources. This, combined with the low-cost substrates and the high-value natural flavours and aromas produced, presents a compelling case for further optimisation of the process.

Natural sources of flavour and aroma compounds are highly sought by the modern consumer; however, traditional sources are often low-yielding, and global supply is often outstripped by consumer demand. Fermentation is a favourable route by which natural flavours and fragrances can be produced. A non-Saccharomyces yeast, Brettanomyces bruxellensis, was investigated for its fermentative potential for the production of flavour and aroma metabolites from juice industry by-products: apple pomace, carrot pomace, and orange pomace. Submerged solid-substrate fermentations were carried out using sterile by-products without nutrient supplementation. Gas chromatography–mass spectrometry was used for volatile metabolite profiling of fermented substrates. One compound of interest, phenylethyl alcohol (rose fragrance), was extracted and quantified using GC-MS at a yield of 2.68 g/kg wet carrot pomace weight. This represents a novel, natural production strategy for phenylethyl alcohol compared to the traditional steam distillation of Rosa domascus sp. petals.

Making high quality but affordable Pinot noir (PN) wine is challenging in most terroirs and New Zealand (NZ)’s situation is no exception. To increase the probability of making highly typical PN wines, producers choose to grow grapes in cool climates on lower fertility soils while adopting labour intensive practices. Stringent yield targets and higher input costs necessarily mean that PN wine cost is high, and profitability lower, in affordable varietal wine ranges.To understand if higher-yielding vines produce wines of lower quality we have undertaken an extensive study of PN in NZ. Since 2018, we established a network of twelve trial sites in three NZ regions to find individual vines that produced acceptable commercial yields (above 2.0 kg per metre of row) and wines of composition comparable to “Icon” labels. Approximately 20 % of 660 grape lots (N = 135) were selected within a narrow juice Total Soluble Solids (TSS) range of 22.0 ± 1.0 °Brix and made into single-vine wines under controlled conditions.Multiple Factor Analysis of the vine, berry, juice and wine parameters from three vintages found grape Berry Weight to be the most effective clustering variable. As the Berry Weight category decreased, there was a systematic increase in the probability of higher berry red colour and total phenolics with a parallel increase in wine phenolics and decreased juice amino acids. The influence of berry weight on wine composition would appear stronger than the individual effects of Vintage, Region, Vineyard or vine Yield. Our observations support the hypothesis that it is possible to produce PN wines that fall within an “Icon” benchmark composition range at yields above 2.5 kg per vine, provided that the Leaf Area:Fruit Weight ratio is above 11 cm2 per g, mean berry weight is below 1.2 g and juice TSS is above 22 °Brix.