The delivery of drugs in a controllable fashion is a topic of intense research activity in both academia and industry because of its impact in healthcare. Implantable electronic interfaces for the body have great potential for positive economic, health, and societal impacts; however, the implantation of such interfaces results in inflammatory responses due to a mechanical mismatch between the inorganic substrate and soft tissue, and also results in the potential for microbial infection during complex surgical procedures. Here, we report the use of conducting polypyrrole (PPY)-based coatings loaded with clinically relevant drugs (either an anti-inflammatory, dexamethasone phosphate (DMP), or an antibiotic, meropenem (MER)). The films were characterized and were shown to enhance the delivery of the drugs upon the application of an electrochemical stimulus in vitro, by circa (ca.) 10–30% relative to the passive release from non-stimulated samples. Interestingly, the loading and release of the drugs was correlated with the physical descriptors of the drugs. In the long term, such materials have the potential for application to the surfaces of medical devices to diminish adverse reactions to their implantation in vivo.
For some professionally, vocationally, or technically oriented careers, curricula delivered in higher education establishments may focus on teaching material related to a single discipline. By contrast, multidisciplinary, interdisciplinary, and transdisciplinary teaching (MITT) results in improved affective and cognitive learning and critical thinking, offering learners/students the opportunity to obtain a broad general knowledge base. Chemistry is a discipline that sits at the interface of science, technology, engineering, mathematics, and medicine (STEMM) subjects (and those aligned with or informed by STEMM subjects). This article discusses the significant potential of inclusion of chemistry in MITT activities in higher education and the real-world importance in personal, organizational, national, and global contexts. It outlines the development and implementation challenges attributed to legacy higher education infrastructures (that call for creative visionary leadership with strong and supportive management and administrative functions), and curriculum design that ensures inclusivity and collaboration and is pitched and balanced appropriately. It concludes with future possibilities, notably highlighting that chemistry, as a discipline, underpins industries that have multibillion dollar turnovers and employ millions of people across the world.
In situ forming hydrogels are a class of biomaterials that can fulfil a variety of important biomedically relevant functions and hold promise for the emerging field of patient-specific treatments (e.g., cell therapy, drug delivery). Here we report the results of our investigations on the generation of in situ forming hydrogels with potential for wound healing applications (e.g., complex blast injuries). The combination of polysaccharides that were oxidized to display aldehydes, amine displaying chitosan and nanostructured ZnO yields in situ forming bionanocomposite hydrogels. The physicochemical properties of the components, their cytotoxicity towards HaCat cells and the in vitro release of zinc ions on synthetic skin were studied. The in situ gel formation process was complete within minutes, the components were non-toxic towards HaCat cells at functional levels, Zn2+ was released from the gels, and such materials may facilitate wound healing.
The development of stimuli‐responsive drug delivery systems offers significant opportunities for innovations in industry. It is possible to produce polymer‐based drug delivery devices enabling spatiotemporal control of the release of the drug triggered by an electrical stimulus. Here we describe the development of a wireless controller for drug delivery from conductive/electroactive polymer‐based biomaterials and demonstrate its function in vitro. The wireless polymer conduction controller device uses very low power, operating at 2.4 GHz, and has a supply voltage controller circuit which controls electrical stimulation voltage levels. The computer graphical user interface program communicates with the controller device, and it receives device information, device status and temperature data from the controller device. The prototype of the wireless controller system can trigger the delivery of a drug, dexamethasone phosphate, from a matrix of degradable electroactive polymers. Furthermore, we introduce the application of in silico toxicity screening as a potentially useful method to facilitate the design of non‐toxic degradable electroactive polymers for a multitude of biotechnological applications, addressing one of the key commercial challenges to biomaterial development, in accordance with ‘safe by design’ principles. © 2020 The Authors. Polymer International published by John Wiley & Sons Ltd on behalf of Society of Industrial Chemistry.
In this study, experimental measurements have been made on the batch adsorption of cadmium and lead ions from aqueous solutions using poly(guanidine modified 2‐acrylamido‐2‐methylpropan sulfonic acid/acrylic acid/N‐vinylpyrrolidone/2‐Hydroxyethyl methacrylate), P(AMPSG/AAc/NVP/HEMA) hydrogels. The guanidyl end group bearing AMPSG monomer was synthesized from the reaction of AMPS and guanidine. The hydrogels were prepared by UV‐curing technique. The morphology of the dry H10‐hydrogel sample was examined by SEM. The influence of the uptake conditions, such as pH, functional monomer per cent, contact time, initial feed concentration, and foreign metal ions on the metal ion binding capacity of hydrogel, was also tested. The selectivity of the hydrogel toward the different metal ions tested was Hg(II) > Pb(II) > Au(III) > Cd(II). The adsorption isotherm models were applied to the experimental data, and it was seen that the Langmuir isotherm model was the best fit for the adsorption of Cd(II) and Pb(II) ions on P(AMPSG/AAc/NVP/HEMA) hydrogel. It was found that adsorbed lead and cadmium ions on P(AMPSG/AAc/NVP/HEMA) hydrogel can be effectively desorbed by acid leaching and the regenerated P(AMPSG/AAc/NVP/HEMA) hydrogel can be reused almost five times less without any loss of adsorption capacity. Copyright © 2009 John Wiley & Sons, Ltd.
A new thiourea and urea functional monomers were synthesized. A series of hydrogels were prepared by photopolymerization. The hydrogels were used for the removal of Pb(II) and Cd(II) ions from aqueous solutions. The influence of the uptake conditions such as the pH, the time, and the initial feed concentration on the metal ion binding capacity of hydrogel was tested. The selectivity of the hydrogels towards the different metal ions was also tested. The adsorption isotherm models were applied. The limits of detection and quantification were calculated. The usability of the hydrogels for preconcentration studies were also investigated.
Biomaterials capable of controlling the delivery of drugs have the potential to treat a variety of conditions. Herein, the preparation of electrically conductive silk fibroin film‐based drug delivery devices is described. Casting aqueous solutions of Bombyx mori silk fibroin, followed by drying and annealing to impart β‐sheets to the silk fibroin, assure that the materials are stable for further processing in water; and the silk fibroin films are rendered conductive by generating an interpenetrating network of a copolymer of pyrrole and 3‐amino‐4‐hydroxybenzenesulfonic acid in the silk fibroin matrix (characterized by a variety of techniques including circular dichroism, Fourier‐transform infrared spectroscopy, nuclear magnetic resonance, Raman spectroscopy, resistance measurements, scanning electron microscopy‐energy dispersive X‐ray spectroscopy, thermogravimetric analysis, X‐ray diffraction, and X‐ray photoelectron spectroscopy). Fibroblasts adhere on the surface of the biomaterials (viability assessed using an (3‐(4,5‐dimethylthiazol‐2‐yl)‐2,5‐diphenyltetrazolium bromide) assay and visualized using a confocal microscope), and a fluorescently labeled drug (Texas‐Red Gentamicin) can be loaded electrochemically and released (µg cm−2 quantities) in response to the application of an electrical stimulus.
The CRISPR-Cas9 system has facilitated the genetic modification of various model organisms and cell lines. The outcomes of any CRISPR-Cas9 assay should be investigated to ensure/improve the precision of genome engineering. In this study, carbon nanotube-modified disposable pencil graphite electrodes (CNT/PGEs) were used to develop a label-free electrochemical nanogenosensor for the detection of point mutations generated in the genome by using the CRISPR-Cas9 system. Carbodiimide chemistry was used to immobilize the 5′-aminohexyl-linked inosine-substituted probe on the surface of the sensor. After hybridization between the target sequence and probe at the sensor surface, guanine oxidation signals were monitored using differential pulse voltammetry (DPV). Optimization of the sensitivity of the nanogenoassay resulted in a lower detection limit of 213.7 nM. The nanogenosensor was highly specific for the detection of the precisely edited DNA sequence. This method allows for a rapid and easy investigation of the products of CRISPR-based gene editing and can be further developed to an array system for multiplex detection of different-gene editing outcomes.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.