Powder-based inkjet 3D printing method is one of the most attractive solid free form techniques. It involves a sequential layering process through which 3D porous scaffolds can be directly produced from computer-generated models. 3D printed products' quality are controlled by the optimal build parameters. In this study, Calcium Sulfate based powders were used for porous scaffolds fabrication. The printed scaffolds of 0.8 mm pore size, with different layer thickness and printing orientation, were subjected to the depowdering step. The effects of four layer thicknesses and printing orientations, (parallel to X, Y and Z), on the physical and mechanical properties of printed scaffolds were investigated. It was observed that the compressive strength, toughness and Young's modulus of samples with 0.1125 and 0.125 mm layer thickness were more than others. Furthermore, the results of SEM and μCT analyses showed that samples with 0.1125 mm layer thickness printed in X direction have more dimensional accuracy and significantly close to CAD software based designs with predefined pore size, porosity and pore interconnectivity.

No abstract

No abstract

No abstract

No abstract

No abstract

No abstract

a b s t r a c tAdditive manufacturing methods such as three-dimensional printing (3DP) show a great potential for production of porous structure with complex internal and external structures for bone tissue engineering applications. To optimize the 3DP manufacturing process and to produce 3D printed parts with the requisite architecture and strength, there was a need to fine-tune the printing parameters. The purpose of this study was to develop optimal processing parameters based on a design of the experiments approach to evaluate the ability of 3DP for making calcium sulfate-based scaffold prototypes. The major printing parameters examined in this study were layer thickness, delay time of spreading the next layer, and build orientation of the specimens. Scaffold dimensional accuracy, porosity, and mechanical stiffness were systematically investigated using a design of experiment approach. Resulting macro-porous structures were also studied to evaluate the potential of 3DP technology for meeting the small-scale geometric requirements of bone scaffolds. Signal-to-noise ratio and analysis of variance (ANOVA) were employed to identify the important factors that influence optimal 3D printed part characteristics. The results showed that samples built using the minimum layer thickness (89 mm) and x-direction of build bed with 300 ms delay time between spreading each layer yielded the highest quality scaffold prototypes; thus, these parameters are suggested for fabrication of an engineered bone tissue scaffold. Furthermore, this study identified orientation and new layer spreading delay time as the most important factors influencing the dimensional accuracy, compressive strength, and porosity of the samples.