The demand for wireless connectivity has grown exponentially over the last few decades. Fifth-generation (5G) communications, with far more features than fourth-generation communications, will soon be deployed worldwide. A new paradigm of wireless communication, the sixth-generation (6G) system, with the full support of artificial intelligence, is expected to be implemented between 2027 and 2030. Beyond 5G, some fundamental issues that need to be addressed are higher system capacity, higher data rate, lower latency, higher security, and improved quality of service (QoS) compared to the 5G system. This paper presents the vision of future 6G wireless communication and its network architecture. This article describes emerging technologies such as artificial intelligence, terahertz communications, wireless optical technology, free-space optical network, blockchain, three-dimensional networking, quantum communications, unmanned aerial vehicles, cellfree communications, integration of wireless information and energy transfer, integrated sensing and communication, integrated accessbackhaul networks, dynamic network slicing, holographic beamforming, backscatter communication, intelligent reflecting surface, proactive caching, and big data analytics that can assist the 6G architecture development in guaranteeing the QoS. Besides, expected applications with 6G communication requirements and possible technologies are presented. We also describe potential challenges and research directions for achieving this goal.
The upcoming fifth- and sixth-generation (5G and 6G, respectively) communication systems are expected to deal with enormous advances compared to the existing fourth-generation communication system. The few important and common issues related to the service quality of 5G and 6G communication systems are high capacity, massive connectivity, low latency, high security, low-energy consumption, high quality of experience, and reliable connectivity. Of course, 6G communication will provide several-fold improved performances compared to the 5G communication regarding these issues. The Internet of Things (IoT) based on the tactile internet will also be an essential part of 5G-and-beyond (5GB) (e.g., 5G and 6G) communication systems. Accordingly, 5GB wireless networks will face numerous challenges in supporting the extensive verities of heterogeneous traffic and in satisfying the mentioned service-quality-related parameters. Optical wireless communication (OWC), along with many other wireless technologies, is a promising candidate for serving the demands of 5GB communication systems. This review paper clearly presents how OWC technologies, such as visible light communication, light fidelity, optical camera communication, and free space optics communication, will be an effective solution for successful deployment of 5G/6G and IoT systems.
Optical wireless communication (OWC) is an excellent complementary solution to its radio frequency (RF) counterpart. OWC technologies have been demonstrated to be able to support high traffic generated by massive connectivity of the Internet of Things (IoT) and upcoming 5 th generation (5G) wireless communication systems. As the characteristics of OWC and RF are complementary, a combined application is regarded as a promising approach to support 5G and beyond communication systems. Hybrid RF/optical and optical/optical wireless systems offer an excellent solution for recovering the limitations of individual systems as well as for providing positive features of each of the technologies. An RF/optical wireless hybrid system consists both RF and optical-based wireless technologies, whereas an optical/optical wireless hybrid system consists two or more types of OWC technologies. The co-deployment of wireless systems can improve system performance in terms of throughput, reliability, and energy efficiency of individual networks. This study surveys the state of the art and key research directions regarding optical wireless hybrid networks, being the first extensive survey dedicated to this topic. We provide a technology overview of existing literature on optical wireless hybrid networks, such as RF/optical and optical/optical systems. We consider the RFbased macrocell, small cell, wireless fidelity, and Bluetooth, as well as optical-based visible light communication, light fidelity, optical camera communication, and free-space optical communication technologies for different combinations of hybrid systems. Moreover, we consider underwater acoustic communication for hybrid acoustic/optical systems. The opportunities brought by hybrid systems are presented in detail. We outline important challenges that need to be addressed for successful deployment of optical wireless hybrid network systems for 5G and IoT paradigms.
Developing a high-speed elliptic curve cryptographic (ECC) processor that performs fast point multiplication with low hardware utilization is a crucial demand in the fields of cryptography and network security. This paper presents field-programmable gate array (FPGA) implementation of a high-speed, low-area, side-channel attacks (SCAs) resistant ECC processor over a prime field. The processor supports 256-bit point multiplication on recently recommended twisted Edwards curve, namely, Edwards25519, which is used for a high-security digital signature scheme called Edwards curve digital signature algorithm (EdDSA). The paper proposes novel hardware architectures for point addition and point doubling operations on the twisted Edwards curve, where the processor takes only 516 and 1029 clock cycles to perform each point addition and point doubling, respectively. For a 256-bit key, the proposed ECC processor performs single point multiplication in 1.48 ms, running at a maximum clock frequency of 177.7 MHz in a cycle count of 262 650 with a throughput of 173.2 kbps, utilizing only 8873 slices on the Xilinx Virtex-7 FPGA platform, where the points are represented in projective coordinates. The implemented design is time-area-efficient as it offers fast scalar multiplication with low hardware utilization without compromising the security level. INDEX TERMS Elliptic curve cryptography (ECC), elliptic curve point multiplication (ECPM), twistedEdwards curve, side-channel attacks (SCAs), field-programmable gate array (FPGA).
Research on electronic healthcare (eHealth) systems has increased dramatically in recent years. eHealth represents a significant example of the application of the Internet of Things (IoT), characterized by its cost effectiveness, increased reliability, and minimal human eff ort in nursing assistance. The remote monitoring of patients through a wearable sensing network has outstanding potential in current healthcare systems. Such a network can continuously monitor the vital health conditions (such as heart rate variability, blood pressure, glucose level, and oxygen saturation) of patients with chronic diseases. Low-power radio-frequency (RF) technologies, especially Bluetooth low energy (BLE), play significant roles in modern healthcare. However, most of the RF spectrum is licensed and regulated, and the effect of RF on human health is of major concern. Moreover, the signal-to-noise-plus-interference ratio in high distance can be decreased to a considerable extent, possibly leading to the increase in bit-error rate. Optical camera communication (OCC), which uses a camera to receive data from a light-emitting diode (LED), can be utilized in eHealth to mitigate the limitations of RF. However, OCC also has several limitations, such as high signal-blockage probability. Therefore, in this study, a hybrid OCC/BLE system is proposed to ensure efficient, remote, and real-time transmission of a patient’s electrocardiogram (ECG) signal to a monitor. First, a patch circuit integrating an LED array and BLE transmitter chip is proposed. The patch collects the ECG data according to the health condition of the patient to minimize power consumption. Second, a network selection algorithm is developed for a new network access request generated in the patch circuit. Third, fuzzy logic is employed to select an appropriate camera for data reception. Fourth, a handover mechanism is suggested to ensure efficient network allocation considering the patient’s mobility. Finally, simulations are conducted to demonstrate the performance and reliability of the proposed system.
With the swift evolution of wireless technologies, the demand for the Internet of Things (IoT) security is rising immensely. Elliptic curve cryptography (ECC) provides an attractive solution to fulfill this demand. In recent years, Edwards curves have gained widespread acceptance in digital signatures and ECC due to their faster group operations and higher resistance against side-channel attacks (SCAs) than that of the Weierstrass form of elliptic curves. In this paper, we propose a high-speed, low-area, simple power analysis (SPA)-resistant field-programmable gate array (FPGA) implementation of ECC processor with unified point addition on a twisted Edwards curve, namely Edwards25519. Efficient hardware architectures for modular multiplication, modular inversion, unified point addition, and elliptic curve point multiplication (ECPM) are proposed. To reduce the computational complexity of ECPM, the ECPM scheme is designed in projective coordinates instead of affine coordinates. The proposed ECC processor performs 256-bit point multiplication over a prime field in 198,715 clock cycles and takes 1.9 ms with a throughput of 134.5 kbps, occupying only 6543 slices on Xilinx Virtex-7 FPGA platform. It supports high-speed public-key generation using fewer hardware resources without compromising the security level, which is a challenging requirement for IoT security.
Twenty-four castrated male British Angora goats of Australasian origin aged 11 months and weighing 23-5 kg live weight were studied in a 112-day experiment. They were allocated in a 2 X 2 factorial design to receive diets containing, per kg dry matter, concentrations of estimated metabolizable energy (ME) of 10-2 M] (LE) or 11-9 MJ (HE) and crude protein concentrations of 108 g (LP) or 180 g (HP). The HE diets were offered to provide a dry-matter intake of 30 g/kg live weight and the LE diets to provide 0-85 of the ME intake of HE diets. In comparison with LE diets, the HE diets, on average, increased live-weight gain, food conversion efficiency, carcass weight, killing-out proportion, empty body weight, cross-sectional area of m. longissimus dorsi and fat thickness over m. serratus dorsalis and weights in the carcass for dissected lean tissue, crude protein (N X 6-25) and dissected and chemically extracted fat. Weights of shoulder, hind barrel, and best-end joints and their weights of dissected lean and fat were increased on HE diets. No consistent effects due to dietary energy were observed for yield or diameter of mohair fibres. The greater intake of dietary protein resulted, on average, in increased values for live-weight gain, efficiency of food conversion, carcass weight, weight of dissected carcass lean tissue and crude protein, killing-out proportion and crosssectional area of m. longissimus dorsi. The greater intake of dietary protein increased significantly both yield and diameter of mohair fibre. Significant interactions between protein and energy for empty body weight, carcass weight and carcass fat indicated that increasing dietary protein intake had a greater positive effect on the low than on the high energy diets. Similarly, increasing the dietary energy consumption on the LP diets produced a greater positive effect than that recorded on the HP diets. The results indicated that growth and lean tissue deposition were affected by both protein and energy intakes but that mohair fibre characteristics were affected consistently only by protein nutrition.
In this paper, an area-time efficient hardware implementation of modular multiplication over five National Institute of Standard and Technology (NIST)-recommended prime fields is proposed for lightweight elliptic curve cryptography (ECC). A modified radix-2 interleaved algorithm is proposed to reduce the time complexity of conventional interleaved modular multiplication. The proposed multiplication algorithm is designed in hardware and separately implemented on Xilinx Virtex-7, Virtex-6, Virtex-5, and Virtex-4 field-programmable gate array (FPGA) platforms. On the Virtex-7 FPGA, the proposed design
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.