Flexible materials embedded with hard magnetic particles have recently gained widespread recognition as small-scale actuators due to their capacity to be a rapid and precise shape-shifting material. Strontium ferrite (SrFe12O19) particles have been shown as a great candidate for such applications, since it is an inert hard magnetic material that, in contrast to barium ferrite and neodymium, is also biocompatible. The preparation of such material is done by mixing the magnetic particles into the uncured elastomer (polydimethylsiloxane (PDMS)), in liquid form, and then pouring the mixture in a mold for curing. If the samples are subjected to a magnetic field during the curing process, chains of particles are formed in the direction of the applied field, thus creating an easy axis in this same direction. The magnetic properties of such composite cannot yet be found in literature. In this study, we analyzed three concentrations of strontium ferrite particles in PDMS under three field configurations, resulting in 9 different samples. The concentrations used were 1:1, 2:1, and 4:1 ratios of PDMS to strontium ferrite per weight. All three types of samples were cured either in a zero magnetic field, or over the north pole of a neodymium permanent magnet, or over the side of said magnet. A biaxial vibrating sample magnetometer (VSM) was used to measure hysteresis curves parallel and perpendicular to the curing field. The samples cured in a field show a squareness ratio of up to 0.94 while the samples cured in zero field, only close to 0.5. The samples cured in a field show a magnetic anisotropy with an easy axis parallel to the curing field. Harvesting these modified properties, a mobile robot manufacturing method is proposed that bypasses the need of applying a high intensity magnetic field.
Despite being widely available, Saccharomyces cerevisiae has not been widely explored for direct extraction of chitosan biopolymer for antimicrobial applications. In our study, S. cerevisiae from Baker's yeast and Aspergillus niger from moldy onion extracts are studied as alternative sources of chitosan; and S cerevisiae chitosan tested for antimicrobial efficacy. The properties of S. cerevisiae chitosan are compared with moldy onion chitosan and shrimp chitosan extracted from shrimp shells. Chitosan extracted from S. cerevisiae is tested for antimicrobial efficacy against Staphylococcus Aureus.The maximum yields of fungal chitosan are 20.85 ± 0.35 mg/g dry S. cerevisiae biomass at 4th day using a culture broth containing sodium acetate, and 16.15 ± 0.95 mg/g dry A. niger biomass at 12th day. The degree of deacetylation (DD%) of the extracted fungal chitosan samples from S. cerevisiae and A. niger are found to be 63.4%, and 61.2% respectively, using Fourier Transform Infrared Spectroscopy. At a concentration of 2 g/L, S. cerevisiae chitosan shows the maximum inhibition zone diameter of 15.48 ± 0.07 mm.Baker's yeast S cerevisiae biomass and A. niger from moldy onions has not been previously explored as a source of extractible fungal chitosan. This study gives insight that S. cerevisiae and A. niger from agricultural or industrial wastes could be a potential biomass source for production of the chitosan biopolymer. The S. cerevisiae chitosan displayed effective antimicrobial properties against S aureus, indicating the viablitiy of S cerevisae as a resource for extraction of high-quality chitosan.
Layer‐by‐layer (LbL) deposition of oppositely charged polyelectrolytes has been widely used to make responsive and multifunctional smart films. Herein, a high‐performance and multifunctional LbL film was fabricated by using a spin‐spray‐assisted (SSA‐LbL) assembly method with poly(diallyldimethylammonium chloride) (PDDA) and poly(acrylic acid) (PAA). The SSA‐LbL method was found to be more efficient and time‐saver in making a homogeneous thick film in tens of micrometers, compared to the conventional immersive assembly method which makes thin films in the nanometer range. When scratches occur, the film shows a quick and durable self‐healing capability due to the dynamic movement of the flexible polyelectrolyte complex chains at the edges of the scratches. An effective UV‐block performance was incorporated into the film by using the graphene oxide (GO) and titanium dioxide (TiO2) nanoparticles as UV‐blocking additives. Due to the hydrophilic feature of PDDA/PAA molecules, the film also showed the anti‐fog property in different environmental conditions. The effect of the concentration of GO and TiO2 nanoparticles on self‐healing and UV‐protection properties were investigated. Also, the optimum range of concentration of GO and TiO2 nanoparticles in polyelectrolyte solutions was determined to fabricate the film with the combined features of self‐healable, UV‐blocking, and anti‐fog.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.