No abstract

No abstract

No abstract

The condensation of pure steam flowing inside a vertical tube has been extensively studied during the last nine decades. Considerable amount of experimental and analytical efforts can be found due to the significance of this subject in practice. In the present work (Part I), experimental investigations have been performed over a range of pressure (0.1 < P < 0.35 MPa) and internal tube diameter (Di = 10, 20 and 43 mm). A two‐dimensional computational fluid dynamic (CFD) simulations have been carried out commercial software Fluent 6.2 [Fluent 6.2, “User's Manual to FLUENT 6.2,” Fluent Inc., Lebanon, USA, 2005]. CFD results were used to predict the temperature profiles, pressure drop and the heat transfer coefficient, which was in close agreement with the experimental values. The film characteristics predicted by the CFD simulations have been compared qualitatively with the photographic images. Further, the CFD model developed in Part I extended for the analysis of all the experimental data reported in the published literature. © 2012 Canadian Society for Chemical Engineering

No abstract

The condensation of pure steam flowing downward inside a vertical tube has been extensively studied. Considerable amount of experimental and analytical efforts can be found due to the significance of this subject in practice. In this work, a critical review of the most important experimental, analytical and computational fluid dynamic (CFD) investigations have been presented. CFD simulations for the geometries of Goodykoontz and Dorsch [Goodykoontz and Dorsch, NASA TN D‐3326, 1966; Goodykoontz and Dorsch, NASA TN D‐3953, 1967], Kim and No [Kim and No, Int. J. Heat Mass Transf. 2000;43:4031–4042] and the present work have been performed and compared with the experimental data reported in these investigations. CFD predictions of the pressure drop and the heat transfer coefficient (HTC) were in close agreement with the experimental values. A preliminary regime map has been constructed for downward flow steam condensation inside pipes. Finally, all the published semi‐empirical correlations for the HTC have been critically analysed and compared with the CFD predictions. An attempt has been made to make specific recommendations. © 2012 Canadian Society for Chemical Engineering

The objective of the paper is to measure the velocity profiles of water based nanofluids for flow through channels in order to understand whether the nanofluids behave Newtonian. For this purpose, experiments were carried for flow through a rectangular channel in laminar regime. Four different nanofluids were used, i. e. Al2O3, CuO, TiO2 and SiO2 with base fluid as water. Experiments were conducted at low concentration of these particles. The velocity profiles were measured using Particle Image Velocimetry. The results indicate that the velocity profiles are similar for all the fluids indicating the flows to be Newtonian.