Cased cemented completions have not been the preferred horizontal-wellcompletion method in offshore Brazil. Lower-cost solutions such as uncementedpreperforated liners were often used in completing horizontal wells offshoreand are usually very effective. Often, however, low producing rates meanstimulation treatments become necessary for many wells. The use of conventionalstimulation technology has generally been ineffective for these completions, which posed a challenge for the operator to find an effective solution forcontinuing developments in some fields. These challenges included re-evaluatingthe more expensive cased cemented completions to allow more effective optionsfor future stimulation, as well as trying to find newer stimulation techniquesthat can be effective with lower-cost completions (noncemented liners). In the attempt to find an economical yet effective stimulation solution, theoperator chose to implement a unique and relatively new hydrajet stimulationtechnique that has a proven success rate in onshore applications. The techniquecan be applied in either sandstone or carbonate formations, which arecommonplace in this field; therefore, stimulation plans in this area willinclude fracture acidizing as well as propped fracture stimulations that use ahigh concentration of proppants or curable resin-coated proppants (RCP). This paper discusses the early results of this investigation. Wells thatwere completed and evaluated using different completion schemes arereviewed. Background As with vertical wells, in horizontal completions underachieving wells arecommonplace. This situation can be caused by many things, such as unexpectedlylow permeabilities in the area. However, in horizontal wells, underachievingwells are probably often attributable to one or more of the followingcircumstances:1–6Permeability anisotropy (especially vertical permeability limitations)Skin damage or near-wellbore plugging of a natural fracture networkIneffective stimulation techniques The third point is especially true in openhole horizontal wells, and evenmoreso in wells that are completed using slotted or preperforated liners.Preperforated liners could even be deemed as "unstimulatable" when conventionalfracture-type stimulation techniques are being considered. Matrix-typestimulation or wellbore wall-cleaning techniques would probably be the onlyviable solution for production enhancement in these type wells. For moderate-to high-permeability reservoir applications, hydrajetting, when coupled with"squeeze" techniques (below fracturing pressures), has proven to be a verybeneficial production enhancement process.7,8 Unfortunately, becauseformation layers tend to be horizontal, horizontal wells tend to stay withinone layer over a long distance and permeability anisotropy becomes a seriousproblem. Another characteristic of horizontal wells is that they are often used informations with very limited thickness; hence, their natural productionperformance has artificially been disadvantaged. Fracture stimulationtechniques are believed to offer the best opportunity to achieve adequatestimulation in these conditions. One possible solution that has been attempted is the use of very high-ratewaterfrac treatments. These treatments often produced disappointing productionresponse, and fracture-mapping techniques applied during some of thesetreatments have demonstrated the inefficiency of this treatment method when theoperator attempts to create multiple fractures along the entire length of thewellbore.9–12 Logical progression of thought might lead to the useof sealing devices. Unfortunately, sealing devices such as inflatable packerstend to be ineffective when used in horizontal openhole completions becausefractures tend to jump over them, creating a passageway. Forpreperforated-liner applications, a passageway has obviously been establishedby the annulus region behind the liner.
Peloton is a sports simulator that uses the Virtual Reality Modeling Language (VRML) to create virtual environments for athletic training and competition. In particular, it creates environments suitable for touring or racing along road courses. Users participate in simulations by walking or running on treadmills or by pedaling stationary bicycles. Each user's exercise equipment is attached to a local computer, and these computers are connected to simulation servers by the World Wide Web. Users may exercise alone or share Peloton virtual spaces with others. :Peloton's virtual environments reproduce sights, sounds, and terrain features from actual road courses. The visual component of this environment is a synthetic, three-dimensional landscape; modeled in VRML, which combines computer-generated graphics with images of actual road courses. The virtual environment also provides simulation participants with force feedback corresponding to a course's changing terrain. The simulator changes the incline of the treadmill or alters the pedaling resistance to create this feedback This paper describes the bicycling simulations enabled by Peloton. It also discusses the role of VRML in the system's implementation, focusing on how its virtual worlds are generated from topological data, how cameras and,third-person viewpoints are managed, and how unconventional input/output devices are incorporated.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.