Abstract(−)‐Menthol is one of the most popular aroma compounds worldwide. While in the past mostly extracted from mint plants, today (−)‐menthol synthesis from other raw materials is becoming more relevant. Common starting materials for menthol synthesis are m‐cresol, citral and myrcene, but also substrates like menthone, mono‐ and bicyclic terpenes and terpenoids have been used for this purpose in the past. As for many applications (−)‐menthol of high purity is required, asymmetric syntheses and enantiomeric resolution of obtained raw products are applied for menthol production. This review gives an overview on the most important synthetic menthol production processes of the companies Symrise, Takasago and BASF and relevant literature in the field of menthol synthesis with a focus on the last 20 years.

Hydroxypivaldehyde represents an important intermediate in the production of neopentyl glycol, which in turn is widely applied in the production of e.g. polyesters, plasticizers, synthetic resin paints and lubricants.

The oxidation of cumene and following cleavage of cumene hydroperoxide (CHP) with sulfuric acid (Hock rearrangement) is still, by far, the dominant synthetic route to produce phenol. In 2020, the global phenol market reached a value of 23.3 billion US$ with a projected compound annual growth rate of 3.4% for 2020–2025. From ecological and economical viewpoints, the key step of this process is the cleavage of CHP. One sought-after way to likewise reduce energy consumption and waste production of the process is to substitute sulfuric acid with heterogeneous catalysts. Different types of zeolites, silicon-based clays, heteropoly acids, and ion exchange resins have been investigated and tested in various studies. For every type of these solid acid catalysts, several materials were found that show high yield and selectivity to phenol. In this mini-review, first a brief introduction and overview on the Hock process is given. Next, the mechanism, kinetics, and safety aspects are summarized and discussed. Following, the different types of heterogeneous catalysts and their performance as catalyst in the Hock process are illustrated. Finally, the different approaches to substitute sulfuric acid in the synthetic route to produce phenol are briefly concluded and a short outlook is given.

The aldol reaction of bio acetone in presence of a strongly basic ion exchange resin was carried out with and without the addition of water in a temperature range between − 30 °C and 45 °C. The conversion, selectivity and service time of the ion exchange resins were investigated in a stirred batch reactor and a continuous fixed bed reactor. For the batch experiments, both conversion and selectivity increased with decreasing temperature. Furthermore, the addition of water to the reaction medium has a positive effect on selectivity and catalyst service time of the resins. For the continuous flow experiments carried out in a fixed bed reactor, the selectivity towards diacetone alcohol is higher than in a batch reactor. This high selectivity is favored by a short contact time which inhibits as expected most of the consecutive reactions.