An Omnimagnet is comprised of three orthogonal nested solenoids that enables magnetic guidance of devices such as medical implants. Electrical current within the solenoids leads to Joule heating resulting in undesired temperature increase within the Omnimagnet. If the temperature exceeds the melting point of the solenoid wire insulation, device failure will occur. Thus, a study of the heat transfer within an Omnimagnet is a necessity. In the present study, a thermal transient model was developed and validated with experimental data with maximum normalized root mean square error equal to 2.3%. A parametric study revealed that a reasonable operational range of input current for the tested Omnimagnet without active cooling is 0 to 9 A. At current higher than 9 A the maximum operational time is less than 2.5 min. Providing cooling to the Omnimagnet frame during heating or increasing convective cooling during cool down are effective methods to increase the maximum operational time of the Omnimagnet.
An Omnimagnet is an electromagnetic device that enables remote magnetic manipulation of devices such as medical implants and microrobots. It is comprised of three orthogonal nested solenoids with a ferromagnetic core at the center. Electrical current within the solenoids leads to undesired temperature increase within the Omnimagnet. If the temperature exceeds the melting point of the wire insulation, device failure will occur. Thus, a study of heat transfer within an Omnimagnet is a necessity, particularly to maximize the performance of the device. A transient heat transfer model, that incorporates all three heat transfer modes, is proposed and validated with experimental data for an Omnimagnet with maximum root mean square error equal to 8% (4°C). The transient model is not computationally expensive and is applicable to Omnimagnets with different structures. The code is applied to calculate the maximum safe operational time at a fixed input current or the maximum safe input current for a fixed time interval. The maximum safe operational time and maximum safe input current depend on size and structure of the Omnimagnet and the lowest melting point of all the Omnimagnet materials. A parametric study shows that increasing convective heat transfer during cooling, and during heating with low input currents, is an effective method to increase the maximum operational time of the Omnimagnet. The thermal model is also presented in a state-space equation format that can be used in a real-time Kalman filter current controller to avoid device failure due to excessive heating.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.