The environmental fate of per- and polyfluoroalkyl substances (PFAS) in aqueous film-forming foams (AFFFs) remains largely unknown, especially under the conditions representative of natural subsurface systems. In this study, the biotransformation of 8:2 fluorotelomer alcohol (8:2 FTOH), a component of new-generation AFFF formulations and a byproduct in fluorotelomer-based AFFFs, was investigated under nitrate-, iron-, and sulfate-reducing conditions in microcosms prepared with AFFF-impacted soils. Liquid chromatography–tandem mass spectrometry (LC–MS/MS) and high-resolution mass spectrometry (HRMS) were employed to identify biotransformation products. The biotransformation was much slower under sulfate- and iron-reducing conditions with >60 mol % of initial 8:2 FTOH remaining after ∼400 days compared to a half-life ranging from 12.5 to 36.5 days under nitrate-reducing conditions. Transformation products 8:2 fluorotelomer saturated and unsaturated carboxylic acids (8:2 FTCA and 8:2 FTUA) were detected under all redox conditions, while 7:2 secondary fluorotelomer alcohol (7:2 sFTOH) and perfluorooctanoic acid (PFOA) were only observed as transformation products under nitrate-reducing conditions. In addition, 1H-perfluoroheptane (F­(CF2)6CF2H) and 3-F-7:3 acid (F­(CF2)7CFHCH2COOH) were identified for the first time during 8:2 FTOH biotransformation. Comprehensive biotransformation pathways for 8:2 FTOH are presented, which highlight the importance of accounting for redox condition and the related microbial community in the assessment of PFAS transformations in natural environments.

Per-and polyfluoralkyl substances (PFAS) are known to accumulate at interfaces, and the presence of nonaqueous-phase liquids (NAPLs) could influence the PFAS fate in the subsurface. Experimental and mathematical modeling studies were conducted to investigate the effect of a representative NAPL, tetrachloroethene (PCE), on the transport behavior of PFAS in a quartz sand. Perfluorooctanesulfonate (PFOS), perfluorononanoic acid (PFNA), a 1:1 mixture of PFOS and PFNA, and a mixture of six PFAS (PFOS, PFNA, perfluorooctanoic acid (PFOA), perfluoroheptanoic acid (PFHpA), perfluorohexanesulfonate (PFHxS), and perfluorobutanesulfonate (PFBS)) were used to assess PFAS interactions with PCE-NAPL. Batch studies indicated that PFAS partitioning into PCE-NAPL (K nw < 0.1) and adsorption on 60−80 mesh Ottawa sand (K d < 6 × 10 −5 L/g) were minimal. Column studies demonstrated that the presence of residual PCE-NAPL (∼16% saturation) delayed the breakthrough of PFOS and PFNA, with minimal effects on the mobility of PFBS, PFHpA, PFHxS, and PFOA. Breakthrough curves (BTCs) obtained for PFNA and PFOS alone and in mixtures were nearly identical, indicating the absence of competitive adsorption effects. A mathematical model that accounts for NAPL−water interfacial sorption accurately reproduced PFAS BTCs, providing a tool to predict PFAS fate and transport in cocontaminated subsurface environments.

No abstract