No abstract

Crosslinking and the resultant changes in mechanical properties have been shown to influence cellular activity within collagen biomaterials. With this in mind, we sought to determine the effects of crosslinking on both the compressive modulus of collagen-glycosaminoglycan scaffolds and the activity of osteoblasts seeded within them. Dehydrothermal, 1-ethyl-3-3-dimethyl aminopropyl carbodiimide and glutaraldehyde crosslinking treatments were first investigated for their effect on the compressive modulus of the scaffolds. After this, the most promising treatments were used to study the effects of crosslinking on cellular attachment, proliferation, and infiltration. Our experiments have demonstrated that a wide range of scaffold compressive moduli can be attained by varying the parameters of the crosslinking treatments. 1-Ethyl-3-3-dimethyl aminopropyl carbodiimide and glutaraldehyde treatments produced the stiffest scaffolds (fourfold increase when compared to dehydrothermal crosslinking). When cells were seeded onto the scaffolds, the stiffest scaffolds also showed increased cell number and enhanced cellular distribution when compared to the other groups. Taken together, these results indicate that crosslinking can be used to produce collagen-glycosaminoglycan scaffolds with a range of compressive moduli, and that increased stiffness enhances cellular activity within the scaffolds.

CitationHaugh MG, Jaasma MJ, O'Brien FJ. The effect of dehydrothermal treatment on the mechanical and structural properties of collagen-GAG scaffolds. Journal of Biomedical Materials Research A. 2009 May;89(2):363-9.-Use LicenceAttribution-Non-Commercial-ShareAlike 1.0 You are free:• to copy, distribute, display, and perform the work.• to make derivative works. Under the following conditions:• Attribution -You must give the original author credit.• Non-Commercial -You may not use this work for commercial purposes.• AbstractThe mechanical properties of a tissue engineering scaffold are critical for preserving structural integrity and functionality during both in vivo implantation and long-term performance. In addition, the mechanical and structural properties of the scaffold can direct cellular activity within a tissue-engineered construct. In this context, the aim of this study was to investigate the effects of dehydrothermal (DHT) treatment on the mechanical and structural properties of collagen-glycosaminoglycan (CG) scaffolds.Temperature (105-180°C) and exposure period (24-120 h) of DHT treatment were varied to determine their effect on the mechanical properties, crosslinking density and denaturation of CG scaffolds. As expected, increasing the temperature and duration of DHT treatment resulted in an increase in the mechanical properties. Compressive properties increased up to 2-fold, while tensile properties increased up to 3.8-fold.Crosslink density was found to increase with DHT temperature but not exposure period.Denaturation also increased with DHT temperature and exposure period, ranging from 25% to 60% denaturation. Crosslink density was found to be correlated with compressive modulus, whilst denaturation was found to correlate with tensile modulus. Taken together, these results indicate that DHT treatment is a viable technique for altering the mechanical properties of CG scaffolds. The enhanced mechanical properties of DHTtreated CG scaffolds improves their suitability for use both in vitro and in vivo. In addition, this work facilitates investigation of the effects of mechanical properties and denaturation on cell activity in a 3D environment.

• to copy, distribute, display, and perform the work.• to make derivative works. Under the following conditions:• Attribution -You must give the original author credit.• Non-Commercial -You may not use this work for commercial purposes.• The pore structure of three-dimensional scaffolds used in tissue engineering has been shown to significantly influence cellular activity. As the optimal pore size is dependant on the specifics of the tissue engineering application, the ability to alter the pore size over a wide range is essential for a particular scaffold to be suitable for multiple applications. With this in mind, the aim of this study was to develop methodologies to produce a range of collagen-glycosaminoglycan (CG) scaffolds with tailored mean pore sizes. The pore size of CG scaffolds is established during the freeze-drying fabrication process. In this study, freezing temperature was varied (À108C to À708C) and an annealing step was introduced to the process to determine their effects on pore size. Annealing is an additional step in the freeze-drying cycle that involves raising the temperature of the frozen suspension to increase the rate of ice crystal growth. The results show that the pore size of the scaffolds decreased as the freezing temperature was reduced. Additionally, the introduction of an annealing step during freeze-drying was found to result in a significant increase (40%) in pore size. Taken together, these results demonstrate that the methodologies developed in this study can be used to produce a range of CG scaffolds with mean pore sizes from 85 to 325 mm. This is a substantial improvement on the range of pore sizes that were possible to produce previously (96-150 mm). The methods developed in this study provide a basis for the investigation of the effects of pore size on both in vitro and in vivo performance and for the determination of the optimal pore structure for specific tissue engineering applications.

No abstract

No abstract

Osteocytes are terminally differentiated bone cells, derived from osteoblasts, which are vital for the regulation of bone formation and resorption. ECM stiffness and cell seeding density have been shown to regulate osteoblast differentiation, but the precise cues that initiate osteoblast–osteocyte differentiation are not yet understood. In this study, we cultured MC3T3-E1 cells on (A) substrates of different chemical compositions and stiffnesses, as well as, (B) substrates of identical chemical composition but different stiffnesses. The effect of cell separation was investigated by seeding cells at different densities on each substrate. Cells were evaluated for morphology, alkaline phosphatase (ALP), matrix mineralisation, osteoblast specific genes (Type 1 collagen, Osteoblast specific factor (OSF-2)), and osteocyte specific proteins (dentin matrix protein 1 (DMP-1), sclerostin (Sost)). We found that osteocyte differentiation (confirmed by dendritic morphology, mineralisation, reduced ALP, Col type 1 and OSF-2 and increased DMP-1 and Sost expression) was significantly increased on soft collagen based substrates, at low seeding densities compared to cells on stiffer substrates or those plated at high seeding density. We propose that the physical nature of the ECM and the necessity for cells to establish a communication network contribute substantially to a concerted shift toward an osteocyte-like phenotype by osteoblasts in vitro.

Articular cartilage has a poor intrinsic capacity for self repair. The advent of autologous chondrocyte implantation has provided a feasible method to treat cartilage defects.However, the associated drawbacks with the isolation and expansion of chondrocytes from autologous tissue has prompted research into alternative cell sources such as mesenchymal stem cells (MSCs) which have been found to exist in the bone marrow as well as other joint tissues such as the infrapatellar fat pad (IFP), synovium and within the synovial fluid itself. In this work we assessed the chondrogenic potential of IFP derived porcine cells over a six week period in agarose hydrogel culture in terms of mechanical properties, biochemical content and histology. It was found that IFP cells underwent robust chondrogenesis as assessed by glycosaminoglycan (1.47 ± 0.22 % w/w) and collagen (1.44 ± 0.22 % w/w) accumulation after 42 days of culture. The 1Hz dynamic modulus of the engineered tissue at this time-point was 272.8 kPa (± 46.8). The removal of TGF-β3 from culture after 21 days was shown to have a significant effect on both the mechanical properties and biochemical content of IFP constructs after 42 days, with minimal increases occurring from day 21 to day 42 without continued supplementation of TGF-β3. These findings further strengthen the case that the IFP may be a promising cell source for putative cartilage repair strategies.3