No abstract

No abstract

Alkali silica reaction and its effect on concrete and mortar have been studied for many years. Several tests and procedures have been formulated to evaluate this reaction, particularly in terms of aggregate reactivity. However, the data given in the literature concerning the mechanical properties of concrete and mortar are scattered and very little information is available for some properties such as fracture energy. In this study, the mechanical behavior of mortar was evaluated and monitored, under normal and accelerated environmental conditions. Fracture energy, compressive strength and tensile strength were measured for mortar specimens, casted with highly reactive Spratt crushed aggregate, at two different storage temperatures (23℃ and 80℃) and at two different alkali concentrations (immersed in water and in 1 N NaOH solution). Moreover, free expansion tests (according to ASTM C1260) and petrographic observations were performed, in order to relate them to the evolution of the mechanical properties of mortar. Results show a decrease of the mechanical properties associated with specimens at 80℃ in alkali solution and that the deterioration due to alkali silica reaction is counter-balanced by the strengthening of mortar resulting from the hydration process. A multi-physics computational framework, based on the Lattice Discrete Particle Model is then proposed. Numerical simulations based on a complete calibration and validation with the obtained experimental data capture the behavior of mortar subjected to the complex coupled effect of strength build-up and alkali silica reaction at different temperatures and alkali contents.

No abstract

The growing interest in the use of self-consolidating concrete (SCC) for a wide variety of structural applications has initiated a reexamination of its properties and current construction practices and how they compare with those of conventional concrete. One property of interest is the formwork pressure of SCC and how it relates to that of conventional concrete. This work presents the results for three tall walls (28, 21.7, and 13 ft tall) cast slowly with SCC and a 10.6-ft-high column poured quickly by using the same concrete used in one of the walls. The research demonstrates that the pressure of SCC against the formwork drops quickly just after the concrete material is placed. Measurements from the walls poured slowly show that the maximum recorded pressure falls far below the hydrostatic pressure and is closely related to the pouring rate. The experiments also reveal that the formwork pressure exerted by SCC can be revitalized if the SCC is vibrated, even if stiffening is already in progress.