The spatio-temporal distribution of O and H radicals in a 90 ns pulsed discharge, generated in a pin-pin geometry with a 2.2 mm gap, in He + H2O (0.1 and 0.25%), is studied both experimentally and by 1D fluid modelling. The density of O and H radicals as well as the effective lifetimes of their excited states are measured using picosecond resolution Two-Photon Absorption Laser Induced Fluorescence (ps-TALIF). Good agreement between experiments and modelling is obtained for the species densities. The density of O and H is found to be homogenous along the discharge axis. Even though the high voltage pulse is 90 ns long, the density of O peaks only about 1 μs after the end of the current pulse, reaching 2x1016cm-3 at 0.1% H2O. It then remains nearly constant over 10 μs before decaying. Modelling indicates that the electron temperature (Te) in the centre of the vessel geometry ranges from 6 to 4 eV during the peak of discharge current, and after 90 ns, drops below 0.5 eV in about 50 ns. Consequently, during the discharge (<100 ns), O is predominantly produced by direct dissociation of O2 by electron impact, and in the early afterglow (from 100ns to 1 μs) O is produced by dissociative recombination of O2 +. The main loss mechanism of O is initially electron impact ionisation and once Te has dropped, it becomes mainly Penning ionisation with He2* and He* as well as 3-body recombination with O+ and He. On time scales of 100-200 μs, O is mainly lost by radial diffusion. The production of H shows a similar behaviour, reaching 0.45x1016 cm-3 at 1 μs, due to direct dissociation of H2O by electron impact (<100ns) followed by electron-ion recombination processes (from 200 ns to 1.5 us). H is dominantly lost through Penning ionisation with He* and He2* and by electron impact ionisation, and by charge exchange with O+. Increasing concentrations of water vapour, from 0.1 to 0.25%, have little effect on the nature of the processes of H formation but trigger a stronger initial production of O, which is not currently reproduced satisfactorily by the modelling. What emerges from this study is that the built up of O and H densities in pulsed discharges continues after electron-impact dissociation processes with additional afterglow processes, not least through the dissociative recombination of O2 + and H2 +.
A 1940 nm thulium fiber oscillator producing >550 peak watts at 10% duty cycle is presented. The laser, pumped by seven high-brightness fiber-coupled 793 nm diodes, is single transverse mode at 45% optical conversion efficiency.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.