In the last few years, the application of Model Predictive Control (MPC) for energy management in buildings has received significant attention from the research community. MPC is becoming more and more viable because of the increase in computational power of building automation systems and the availability of a significant amount of monitored building data. MPC has found successful implementation in building thermal regulation, fully exploiting the potential of building thermal mass. Moreover, MPC has been positively applied to active energy storage systems, as well as to the optimal management of on-site renewable energy sources. MPC also opens up several opportunities for enhancing energy efficiency in the operation of Heating Ventilation and Air Conditioning (HVAC) systems because of its ability to consider constraints, prediction of disturbances and multiple conflicting objectives, such as indoor thermal comfort and building energy demand. Despite the application of MPC algorithms in building control has been thoroughly investigated in various works, a unified framework that fully describes and formulates the implementation is still lacking. Firstly, this work introduces a common dictionary and taxonomy that gives a common ground to all the engineering disciplines involved in building design and control. Secondly the main scope of this paper is to define the MPC formulation framework and critically discuss the outcomes of different existing MPC algorithms for building and HVAC system management. The potential benefits of the application of MPC in improving energy efficiency in buildings were highlighted.
(2017). Hybrid model predictive control of a residential HVAC system with on-site thermal energy generation and storage. Applied Energy, Hybrid model predictive control of a residential HVAC system with onsite thermal energy generation and storage AbstractThis paper describes the development, implementation and experimental investigation of a Hybrid Model Predictive Control (HMPC) strategy to control solar-assisted heating, ventilation and air-conditioning (HVAC) systems with on-site thermal energy generation and storage. A comprehensive approach to the thermal energy management of a residential building is presented to optimise the scheduling of the available thermal energy resources to meet a comfort objective. The system has a hybrid nature with both continuous variables and discrete, logic-driven operating modes. The proposed control strategy is organized in two hierarchical levels. At the high-level, an HMPC controller with a 24-h prediction horizon and a 1-h control step is used to select the operating mode of the HVAC system. At the low-level, each operating mode is optimised using a 1-h rolling prediction horizon with a 5-min control step. The proposed control strategy has been practically implemented on the Building Management and Control System (BMCS) of a Net ZeroEnergy Solar Decathlon house. This house features a sophisticated HVAC system comprising of an air-based photovoltaic thermal (PVT) collector and a phase change material (PCM) thermal storage integrated with the air-handling unit (AHU) of a ducted reverse-cycle heat pump system. The simulation and experimental results demonstrated the high performance achievable using an HMPC approach to optimising complex multimode HVAC systems in residential buildings, illustrating efficient selection of the appropriate operating modes to optimally manage thermal energy of the house.
. (2015). Development and optimization of an innovative HVAC system with integrated PVT and PCM thermal storage for a net-zero energy retrofitted house. Energy and Buildings, Development and optimization of an innovative HVAC system with integrated PVT and PCM thermal storage for a net-zero energy retrofitted house AbstractThis paper describes a novel solar-assisted HVAC system developed for the Team UOW 'Illawarra Flame' Solar Decathlon house, the winner of the Solar Decathlon China 2013 competition. This HVAC system consists of an air-based photovoltaic-thermal (PVT) collector and a phase change material (PCM) thermal storage unit integrated with a reverse cycle heat pump, in a ducted system. The system was designed for operation during both winter and summer using daytime solar radiation and night-time sky radiative cooling, respectively. The PVT collector heats or cools fresh air from ambient and thereby provides heating or cooling either directly to the indoor space, or to the PCM storage unit. The heat stored in the PCM can be used later to condition the space or precondition the air entering the air handling unit. Analytical models for the PVT collector and PCM unit were developed in order to be easily implemented into a practical building management system (BMS). Experimental studies on the PVT collector and PCM unit were carried out and the data was used to validate the effectiveness of the models. It is shown that there is a good agreement between the model simulation results and experimental test data. A simple optimisation methodology of the operating modes that involve these components is also presented. collector and a Phase Change Material (PCM) thermal storage unit integrated with a reverse cycle heat pump, in a ducted system. The system was designed for operation during both winter and summer using daytime solar radiation and night-time sky radiative cooling, respectively. The PVT collector heats or cools fresh air from ambient and thereby provides heating or cooling either directly to the indoor space, or to the PCM storage unit. The heat stored in the PCM can be used later to condition the space or precondition the air entering the Air Handling Unit. Analytical models for the PVT collector and PCM unit were developed in order to be easily implemented into a practical Building Management System (BMS).Experimental studies on the PVT collector and PCM unit were carried out and the data was used to validate the effectiveness of the models. It is shown that there is a good agreement between the model simulation results and experimental test data. A simple optimisation methodology of the operating modes that involve these components is also presented.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.