The purpose of this study was to evaluate the performance of a resin-modified glass ionomer cement (RMGIC) to which bacterial cellulose nanocrystals (BCNs) were added. BCNs were incorporated into the RMGIC powder in ratios of 0.3%, 0.5%, and 1% (w/w). One control and three experimental groups were enrolled in the study: unmodified RMGIC (control), 0.3% (w/w) BCN-modified RMGIC, 0.5% (w/w) BCN-modified RMGIC, and 1% (w/w) BCN-modified RMGIC. The surface hardness and surface roughness were the parameters assessed. The materials were characterized by scanning electron microscopy (SEM). The data were analyzed using the one-way ANOVA and Kruskal–Wallis tests for surface hardness and roughness, respectively. The addition of BCN resulted in the improvement of surface roughness in all the specimens compared with the control material. The RMGIC modified by 1% (w/w) BCN showed the lowest surface roughness (decreased by 52%) among all tested groups. However, BCN had a negative effect on the surface hardness of RMGIC. The group with 0.3% (w/w) BCN had the least decrease in microhardness (13%). According to the results, the RMGIC group modified by 1% (w/w) BCN had a smoother surface than the other groups. The surface microhardness of the RMGIC decreased after BCNs were added to it.
Objectives The purpose of this study was to evaluate the effect of bacterial cellulose nanocrystals (BCNCs) on the mechanical properties of resin-modified glass ionomer cements (RMGICs) including compressive strength (CS), diametral tensile strength (DTS), and modulus of elasticity (E).
Materials and Methods BCNCs were incorporated into RMGIC at various concentrations (0.3, 0.5, and 1 wt%). Unmodified RMGIC was used as the control group. The specimens were stored in distilled water at 37°C for 24 hours. CS and DTS, as well as modulus of elasticity, were evaluated using a universal testing machine. The nanostructure of BCNCs was observed via field emission scanning electron microscopy.
Statistical Analysis One-way analysis of variance and post-hoc Tukey tests were used for data analysis. Level of significance was at p < 0.05.
Results The addition of BCNCs to RMGIC led to an increase in all of the tested mechanical properties compared with the control group, with a significant increase observed for 1 wt% BCNC. CS and DTS improved up to 23%, and modulus of elasticity increased by 44%.
Conclusions The addition of BCNCs to the RMGIC improved the mechanical properties, including CS, elastic modulus, and DTS. Thus, the newly developed RMGICs with BCNCs might represent an ideal and promising novel dental material in restorative dentistry.
Objective
This study aimed to evaluate and compare the impacts of the postbleaching application of sodium ascorbate, alpha‐tocopherol, and quercetin on the shear bond strength (SBS) of composite resin.
Material and Methods
60 extracted intact maxillary first premolars were collected and were randomly divided into five experimental groups as follows (n=12): Group A (negative control): no bleaching, Group B (positive control): bleaching with 40% hydrogen peroxide (HP), Group C: HP±10% sodium ascorbate for 10min, Group D: HP±10% alpha‐tocopherol for 10min, and Group E: HP±1% quercetin for 10min. Composite bonding was done immediately after bleaching for Groups B‐E and without any treatment for Group A. After being stored in distilled water at room temperature for 24h, all specimens were tested for SBS in the universal testing machine. One‐way analysis of variance and Tukey's post‐hoc test were used to analyze the SBS values of all groups.
Results
The results showed that the bonding of composite to the unbleached group exhibited the highest mean value of SBS (22.68±2.91MPa). Among the antioxidant‐treated groups, the highest SBS value was detected in quercetin‐treated specimens (15.45±1.58MPa), which was significantly different from the positive control group (p<.05).
Conclusion
It could be concluded that 10% quercetin applied for 10min increased the bond strength to bleached enamel, but it was not able to reverse it completely.
Objective
The aim of this study was to evaluate and compare the effects of chlorhexidine, quercetin, and α‐tocopherol on the shear bond strength of universal adhesives in the short (24h) and long term (6 months).
Material and Methods
Ninety‐six extracted sound molars were collected and divided randomly into four groups: control (no treatment), 2% chlorhexidine, 10% α‐tocopherol, and 1% quercetin. The solutions were prepared and applied to the teeth for 60 s, followed by application of All‐Bond universal adhesive and composite build‐up. Half of the specimens in each group (n = 12) were tested for shear bond strength (SBS) after 24 h of storage and the other half were kept in distilled water for 6 months and then tested for shear bond strength. The shear bond strength test was performed and the failure modes were determined using a stereomicroscope. The data were analyzed using two‐way analysis of variance and Tukey's post hoc tests with p ˂ .05 as the significance level.
Results
The results of the two‐way analysis of variance test showed that there was no significant difference in immediate SBS, and after 6 months, α‐tocopherol had the lowest SBS in comparison to the control and CHX subgroups (p < .05). The t‐test showed that the shear bond strength in the α‐tocopherol and quercetin groups was significantly decreased after 6 months.
Conclusion
It can be concluded that the solutions used in this study had no adverse effect on immediate SBS. After 6 months, the CHX could preserve SBS in comparison to other groups.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.