A chemical free, nanotechnology-based, antimicrobial platform using Engineered Water Nanostructures (EWNS) was recently developed. EWNS have high surface charge, are loaded with reactive oxygen species (ROS), and can interact-with, and inactivate an array of microorganisms, including foodborne pathogens. Here, it was demonstrated that their properties during synthesis can be fine tuned and optimized to further enhance their antimicrobial potential. A lab based EWNS platform was developed to enable fine-tuning of EWNS properties by modifying synthesis parameters. Characterization of EWNS properties (charge, size and ROS content) was performed using state-of-the art analytical methods. Further their microbial inactivation potential was evaluated with food related microorganisms such as Escherichia coli, Salmonella enterica, Listeria innocua, Mycobacterium parafortuitum, and Saccharomyces cerevisiae inoculated onto the surface of organic grape tomatoes. The results presented here indicate that EWNS properties can be fine-tuned during synthesis resulting in a multifold increase of the inactivation efficacy. More specifically, the surface charge quadrupled and the ROS content increased. Microbial removal rates were microorganism dependent and ranged between 1.0 to 3.8 logs after 45 mins of exposure to an EWNS aerosol dose of 40,000 #/cm3.

Food safety and quality assurance is entering a new era. Interventions along the food supply chain must become more efficient in safeguarding public health and the environment and must address numerous challenges and new consumption trends. Current methods of microbial control to assure the safety of food and minimize microbial spoilage have each shown inefficiencies. Nanotechnology is a rapidly expanding area in the agri/feed/food sector. Nano-enabled approaches such as antimicrobial food-contact surfaces/packaging, nano-enabled sensors for rapid pathogen/contaminant detection and nano-delivered biocidal methods, currently on the market or at a developmental stage, show great potential for the food industry. Concerns on potential risks to human health and the environment posed by use of engineered nanomaterials (ENMs) in food applications must, however, be adequately evaluated at the developmental stage to ensure consumer's acceptance.

Foodborne diseases caused by the consumption of food contaminated with pathogenic microorganisms or their toxins have very serious economic and public health consequences. Here, we explored the effectiveness of a recently developed intervention method for inactivation of microorganisms on fresh produce, and food production surfaces. This method utilizes Engineered Water Nanostructures (EWNS) produced by electrospraying of water vapor. EWNS possess unique properties; they are 25 nm in diameter, remain airborne in indoor conditions for hours, contain Reactive Oxygen Species (ROS) and have very strong surface charge (on average 10 e/structure). Here, their efficacy in inactivating representative foodborne bacteria such as Escherichia coli, Salmonella enterica, and Listeria innocua, on stainless steel surfaces and on organic tomatoes, was assessed. The inactivation was facilitated using two different exposure approaches in order to optimize the delivery of EWNS to bacteria: (1) EWNS were delivered on the surfaces by diffusion and (2) a "draw through" Electrostatic Precipitator Exposure System (EPES) was developed and characterized for EWNS delivery to surfaces. Using the diffusion approach and an EWNS concentration of 24,000 #/cm3, the bacterial concentrations on the surfaces were reduced, depending on the bacterium and the surface type, by values ranging between 0.7 to 1.8 logs. Using the EPES approach and for an aerosol concentration of 50,000 #/cm3 at 90 min of exposure, results show a 1.4 log reduction for E. coli on organic tomato surfaces, as compared to the control (same conditions in regards to temperature and Relative Humidity). Furthermore, for L. innocua, the dose-response relationship was demonstrated and found to be a 0.7 and 1.2 logs removal at 12,000 and 23,000 #/cm3, respectively. The results presented here indicate that this novel, chemical-free, and environmentally friendly intervention method holds potential for development and application in the food industry, as a "green" alternative to existing disinfection methods.

Airborne transmitted pathogens such as Mycobacterium tuberculosis (Mtb) cause serious, often fatal infectious disease with enormous global health implications. Due to their unique cell wall and slow growth, mycobacteria are among the most resilient microbial forms. Herein we evaluate the ability of an emerging, chemical-free, nanotechnology-based method to inactivate M. parafortuitum (Mtb surrogate). This method is based on the transformation of atmospheric water vapor into engineered water nano-structures (EWNS) via electrospray. We demonstrate that the EWNS can interact with and inactivate airborne mycobacteria, reducing their concentration levels significantly. Additionally, EWNS can inactivate M. parafortuitum on surfaces eight times faster than the control. The mechanism of mycobacteria inactivation was also investigated in this study. It was demonstrated that the EWNS effectively deliver the reactive oxygen species, encapsulated during the electrospray process, to the bacteria oxidizing their cell membrane resulting into inactivation. Overall, this is a method with the potential to become an effective intervention technology in the battle against airborne infections. From the Clinical Editor This study demonstrates the feasibility of mycobacterium inactivation in airborne form or on contact surfaces using electrospray activated water nano-structures. Given that the method is free of toxic chemicals, this might become an important tool in the prevention of mycobacterial infections, which are notoriously hard to treat.

Despite the progress in the area of food safety, foodborne diseases still represent a massive challenge to the public health systems worldwide, mainly due to the substantial inefficiencies across the farm-to-fork continuum. Here, we report the development of a nano-carrier platform, for the targeted and precise delivery of antimicrobials for the inactivation of microorganisms on surfaces using Engineered Water Nanostructures (EWNS). An aqueous suspension of an active ingredient (AI) was used to synthesize iEWNS, with the 'i' denoting the AI used in their synthesis, using a combined electrospray and ionization process. The iEWNS possess unique, activeingredient-dependent physicochemical properties: i) they are engineered to have a tunable size in the nanoscale; ii) they have excessive electric surface charge, and iii) they contain both the reactive oxygen species (ROS) formed due to the ionization of deionized (DI) water, and the AI used in their synthesis. Their charge can be used in combination with an electric field to target them onto a surface of interest. In this approach, a number of nature-inspired antimicrobials, such as H 2 O 2 , lysozyme, citric acid, and their combination, were used to synthesize a variety of iEWNS-based nano-sanitizers. It was demonstrated through foodborne-pathogen-inactivation experiments that due to the targeted and precise delivery, and synergistic effects of AI and ROS incorporated in the iEWNS structure, a pico-to nanogram-level dose of the AI delivered to the surface using this nano-carrier platform is capable of achieving 5-log reductions in minutes of exposure time. This aerosol-based, yet 'dry' intervention approach using iEWNS nano-carrier platform offers advantages over current 'wet' techniques that are prevalent commercially, which require grams of the AI to achieve similar inactivation, leading to increased chemical risks and chemical waste byproducts. Such a targeted nano-carrier approach has the potential to revolutionize the delivery of antimicrobials for sterilization in the food industry.