High living standards and a comfortable modern way of life are related to an increased usage of various plastic products, yielding eventually the generation of an increased amount of plastic debris in the environment. A special concern is on microplastics (MPs), recently classified as contaminants of emerging concern (CECs). This review focuses on MPs’ adverse effects on the environment based on their bioactivity. Hence, the main topic covered is MPs’ ecotoxicity on various aquatic (micro)organisms such as bacteria, algae, daphnids, and fish. The cumulative toxic effects caused by MPs and adsorbed organic/inorganic pollutants are presented and critically discussed. Since MPs’ bioactivity, including ecotoxicity, is strongly influenced by their properties (e.g., types, size, shapes), the most common classification of MPs types present in freshwater are provided, along with their main characteristics. The review includes also the sources of MPs discharge in the environment and the currently available characterization methods for monitoring MPs, including identification and quantification, to obtain a broader insight into the complex problem caused by the presence of MPs in the environment.

No abstract

No abstract

Microplastic particles (MPs) are widely distributed pollutants in the environment. While a growing number of studies have shown that MPs are toxic to plant and animal life, systemic efforts to reduce their presence have been scarce. Low-density polyethylene (LDPE) and polystyrene (PS) are one of the most common among all plastic-forming MPs. In this study, pure bacterial strains, Bacillus licheniformis and Lysinibacillus <br /> massiliensis, and a mixed bacterial culture of Delftia acidovorans and Bacillus sp., were <br /> used for biodegradation of LDPE and PS microplastics. Biodegradation of MP-PS and <br /> MP-LDPE of particle size 300 – 500 μm was carried out under batch operating conditions at a temperature of 25 ± 2 °C, pH values of 7.15, and 160 rpm during 22 days. The <br /> obtained results showed that mixed bacterial cultures degraded MP-LDPE and MP-PS <br /> better than pure bacterial cultures, and the biodegradation efficiency was higher for MP-LDPE than for MP-PS, as indicated by greater reduction in peak intensity and spectral <br /> deformation, higher colony forming unit (CFU), and inorganic carbon (IC) values.

In the last two decades, microplastics (MP) have been identified as an emerging environmental pollutant. Due to their small size, MP particles may easily enter the food chain, where they can have adverse effects on organisms and the environment in general. The common methods for the removal of pollutants from the environment are not fully effective in the elimination of MP; thus, it is necessary to find a more suitable treatment method(s). Among the various approaches tested, biodegradation is by far the most environmentally friendly and economically acceptable remediation approach. However, it has serious drawbacks, generally related to the rather low removal rate and often insufficient efficiency. Therefore, it would be beneficial to use some of the less economical but more efficient methods as pretreatment prior to biodegradation. Such pretreatment would primarily serve to increase the roughness and hydrophilicity of the surface of MP, making it more susceptible to bioassimilation. This review focuses on advanced oxidation processes (AOPs) as treatment methods that can enhance the biodegradation of MP particles. It considers MP particles of the six most commonly used plastic polymers, namely: polyethylene, polypropylene, polystyrene, polyvinyl chloride, polyethylene terephthalate and polyurethane. The review highlights organisms with a high potential for biodegradation of selected MP particles and presents the potential benefits that AOP pretreatment can provide for MP biodegradation.