This study demonstrates the first use of a dielectric constant meter, coupled with an automated data logging module, for in situ monitoring of solution crystallization processes. The results show that this in situ measurement could detect not only the cloud point that corresponds to the onset of nucleation but also the clear point that closely represents the solubility limit. The metastable zone width (MZW) can subsequently be estimated as the gap between the loci of the cloud and clear points. In addition, the general phenomena of the crystallization process could be observed from several different regions of the dielectric constant profile. Direct comparison with turbidity measurement and focused beam reflectance measurement (FBRM) confirms that the cloud and clear points determined by the present dielectric constant measurement are reliable. This study opens new opportunities for the use of the dielectric constant meter as a simple, inexpensive, and convenient alternative tool in the field of crystallization process monitoring.

Hydroformylations of cyclopentene and 3,3-dimethylbut-1-ene were performed using both Rh(4)(CO)(12) and (eta(5)-C(5)H(5))Mo(CO)(3)H as precursors in n-hexane at 298 K. Both stoichiometric and catalytic hydroformylations were conducted as well as isotopic labeling experiments. Six organometallic pure component spectra were recovered from the high-pressure FTIR experiments, namely the known species Rh(4)(CO)(12), (eta(5)-C(5)H(5))Mo(CO)(3)H, RCORh(CO)(4), and the new heterobimetallic complexes RhMo(CO)(7)(eta(5)-C(5)H(5)), a weak hydrogen bonded species (eta(5)-C(5)H(5))Mo(CO)(3)H-C(5)H(9)CORh(CO)(4), and a substituted RhMo(CO)(7-y)(eta(5)-C(5)H(5))L(y), where y = 1 or 2 and L = (pi-C(5)H(8)). The main findings were (1) catalytic binuclear elimination (CBER) occurs between (eta(5)-C(5)H(5))Mo(CO)(3)H and RCORh(CO)(4) resulting in aldehyde and RhMo(CO)(7)(eta(5)-C(5)H(5)), and this mechanism is responsible for ca. 10% of the product formation; (2) molecular hydrogen is readily activated by the new heterobimetallic complex(es); (3) FTIR and DFT spectroscopic evidence suggests that the weak hydrogen bonded species (eta(5)-C(5)H(5))Mo(CO)(3)H-C(5)H(9)CORh(CO)(4) has an interaction of the type eta(5)-C(5)H(4)-H...O=C; and (4) independent physicochemical experiments for volumes of interaction confirm that significant solute-solute interactions are present. With respect to the efficiency of the catalytic cycle, the formation of a weak (eta(5)-C(5)H(5))Mo(CO)(3)H-C(5)H(9)CORh(CO)(4) complex results in a significant decrease in the measured turnover frequency (TOF) and is the primary reason for the inhibition observed in the bimetallic catalytic hydroformylation. Such hydrogen bonding through the eta(5)-C(5)H(5) ring might have relevance to inhibition observed in other catalytic metallocene systems. The present catalytic system is an example of concurrent synergism and inhibition in bimetallic homogeneous catalysis.